Problem with reinstall El capitan

Similar Questions

• Solve problems by reinstalling El Capitan?

  I have some problems minor but annoying and persistent I want to fix it. One is that by clicking on the red dot at the top left of the window does not close the window, as it should. I have to click on the point, and then click the window underneath. Only after the second click done to close the window. The other thing I may not notice the fault of my computer. It's just that I have trouble opening multiple Web sites or pages of the site. What is normal, I can't say. All I can say is that this situation has not always existed.

  I used Onyx and disk utility in an effort to find and fix the problem, but that did not help. Now I'm wondering if it might help to reinstall El Capitan. I also want to know if, in doing so, I could run into unexpected problems.

  Have you used the Mac a long time after your last installation of 0? That you have upgraded to El Capitan, Yosemite or Maverick?

  Maybe it's time to backup your data and do a clean and fresh installation... If not, perhaps it is little and known bugs...

• problems with reinstalling xp pro on replacement hard drive

  I have a Dell Dimension 8400 purchased in 2005. I am trying to replace the old hard drive (SATA, WD, 250 G) with a similar (same room, only 500 G). After many difficulties, I had a bootable CD and was able to start with the new drive in, and I started to reinstall XP. But halfway through, he started to say various files were missing, and the installation worked properly - XP starts to load, then a get a blue screen and error message.

  Has been the problem with the partition of the drive? With the file system? With missing controllers?

  A reinstallation is possible with the Dell XP?

  There a better way to do it, by copying the old disk to the new disk image? Which copy on XP properly?

  I have spent hours on this problem so far and would welcome any advice.

  Several people seem to have had similar problems, but do not know if they are exactly the same questions.

  Thank you

  
  

• problem with reinstalling windows 7 on an acer desktop

  OK im working on a computer for someone who he uninstalled windows 7 os. on computer there I the intstallation disc, but when I try to install windows 7 what pieces I and restarts the computer ever time... im stuck here and I feel bad, not knowing what someone can help me

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  For Acer, press and hold ALT + F10, as soon as you see the logo

• Problem with reinstalling Elements9

  My computer crashed and the Elements 9 software has been lost.  I have the disc, but cannot find the serial number to reinstall.  The two serial numbers for Photoshop wall on my account are not valid for the 9 elements.  I have in the past bought items 7, 9 elements and just bought Elemtns 12. I want to use Elements 9 until I got used to 12 items.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

  In the case you haven't checked everywhere...

  To locate the serial number:
  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• Problem with reinstalling Microsoft Money 3.0 on Windos 7

  I have Microsoft Money 3.0 program on 3.5 (2), but have no way to reinstall and have a little problem

  Hello

  For questions of Microsoft Money you please directly post the Forum money from Microsoft.

  http://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.

• Problem with iMac El Capitan bridge and or of the retina

  Bridge stops suddenly on my iMac with OS X El Capitan retina.  Is there any solution for this?

  Hi Romuald

  Greetings!

  What version of the bridge are you using?

  It returns an error while closing?

  See Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

  Concerning

  Assani

• Problem with reinstalling CS6

  I just installed a new SSD as C: I am trying to reinstall CS6.  Says I don't have a product calling.  Reinstalled CS3 and said CS6 installing CS3 isn't a product calling!  I have CS3 and CS6 serial numbers.  I try next?  CS6 CS3 are still installed on the old HARD drive on the computer, but apparently there is no easy way to move them to the new SSD.

  You should be ok with your cs3 with a cs6 update last year.

  as a general rule, you should not install cs3 first.  you could start your installation of the upgrade of the cs6, and you will be prompted for the serial numbers of the cs3 and cs6.  If you are sure that you have entered those correctly (http://helpx.adobe.com/x-productkb/global/find-serial-number.html) and they are not recognized, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

• Photo stream no problem with screensaver (El Capitan 10.11.2)

  Since the installation of the latest update for El Capitan (v10.11.2) 13/12/2015, the possibility to select albums of Photo Stream is no longer available in the screen saver.  I'm tired of seeing the National Geographic pictures... and would like to see pictures of my children floating again.

  Anyone have any suggestions about how to make that option re-appear?

  If it looks like my installation and looks like it is, you will need to open the photos and let it update your library.  After it updates the library, you may need to leave Photos (don't remember if I had it or not) so he re - saves your file.  Once this is done, you can go in the settings of your screensaver and Photos is a full option again.

• Problem with reinstalling/upgrading Vista SP2.

  On the initial installation attempt, I was prompted to uninstall PowerShell. I removed the PowerShell in the list of updates (KB928439) according to the instructions provided by Microsoft. About 2 minutes after installation, he continues to ask me to uninstall PowerShell. Suggestions... Please!

  Hello

  It is all MS has on this

  http://support.Microsoft.com/kb/950376

• Do not buy if PhotoShop/LightRoom CC works with Mac El Capitan? In my view, that there was some problems! Thank you

  I read in the forums that Creative Cloud PhotoShop CC has problems with MAC El Capitan?

  Please see Compatibility FAQ for details.

• Problems reinstalling first elements 12 - bought first elements 13 and also have problems with installation, see the log. I hope you can help us?  KEJ1131

  See the log here: http://bannerportalen.dk/PDApp.log

  Best regards

  Knud Erik larger

  Issues resolved with Adobe Chat. Installed Adobe Application Manager 8.0 and YES! -no problem with reinstalling! :-)

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• Ver El Capitan 10.11.6 - problems with external display

  I've updated my Macbook Air to the latest version of El Capitan (ver.10.11.6), and since then, I had problems with my external monitor: image is thus largest, out of proportion, and I can't seem to be able to set the zoom out or by using the display options. That's all just terrible to work with her. It is not my monitor because I never change its configurations, and there is nobody else who has access, and the problem started after I updated to version 10.11.6

  Any help will be appreciated!

  How do you connect the monitor?

  Mirroring your screen or to help us address display?

  What is the native resolution of your screen?