Problem with Sansa Fuze 8 GB... It's... But black screen, won't play, will not turn off... Nothing...
Well I got it for about a week now... got for Christmas... it has worked well since then... but this morning that I was listening to the song it... completed one then he switched to the next as usual... He plays even one second and the screen went black... but the thing is... its again because you can see the back clear even if its black... and the blue light around the spinning wheel is on results also... I tried holding the button of power... nothing... does... I tried to click all the buttons on wheel... nothing also... click on the House the lock button... nothing too... I tried pluging in there but he has yet to read on the computer and nothing happened to the screen of the reader... and the thing is the only way to turn it off is the power switch, but it does not work... so the only thing I can find died just see if it works and try pluging it in there... try to turn it on... or maybe he emerges from this... I don't know everything... but if anyone has had this problem or if it can be fixed somehow or if I can get it sent to get fixed or something... I would like to know please... thank you all so much for your time and have a good...
But for now I'm not going to click on something else and nothing spoil... Also I need a way... If possible... that wont deleat al of my music off it... and I can't connect and transfer it to the computer, so im screwed... but so so so be it...
Have you tried to hold the power switch for 20 seconds to reset? (does erase all files)
d
Tags: SanDisk Sansa
Similar Questions
-
replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work. How can I reset?
Hello
Do you use the HL-2270DW printer?
Follow the steps in troubleshooting mentioned in the articles below:
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Print the problem - troubleshooting
If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link
http://www.brother-USA.com/support/custserv.aspx
He hopes to help!
-
I installed the update as requested for the bug fix, now Revel will not launch. I reinstalled it and it opens at all on my iPad.
We are aware of any problems installing people are affected by the latest version of iOS, and we apologize for the inconvenience it has caused.
We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way our App is getting wrapped up for delivery to customers. We are working closely with Apple to fix the problem as soon as possible. Thank you for your patience. In the meantime, feel free to Revel access via your web browser, Mac, 8 windows, Android devices.
Please see the post below updates on the issue of the revel facilities:
-
MY Apple TV light is stuck on and I can not get a service or a screen.
I would recommend restoring the ATV via iTunes...
-
synchronization with Gmail and Google calendar will not turn off
Hi all
I have several daily reminders to appear on my PC but I don't want that they pop up on my phone and don't I want notifications by e-mail on my phone, so I unchecked both in the Google sync account on my phone, but they still continue... actually even the daily calendar events that I deleted on my PC are always popping up on my phone.
T-Mobile gave the usual to remove the battery and restart Council but still the same thing.
I want to be able to access a current calendar and Gmail but not pop-up on my phone... advice?
Thank you very much
Randy
Open the calendar application and click on the menu button. Select more > settings > set alerts & notifications, then select 'off '.
You can also check the synchronization settings while your in the application by pressing the menu button and then selecting "calendars".
-
are all helmets with a Jack 3,5 mm compatible with sansa fuze?
are all helmets with a Jack 3,5 mm compatible with sansa fuze?
Yes, essentially, but make sure they are a basic stereo headset, which means three bands metal with two insulating rings. The Sansa is quite happy with a 16 ohm headphone, and that they are effective, 32 ohms.
Bob
-
I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game
You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.
(142394)
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
Error 1720. There is a problem with this windows package install. a script required fpr this installation to complete could not be run. Contact your provider to support personal or package. action Coustom DelAppData error script-2146828283. Argument or appeal of Microsoft VbScript runtime error: invalid procedures: "Left" line 22, column 1.
Contact the technical support for the program that you are trying to install. MS - MVP - Elephant Boy computers - don't panic!
-
Original title: an error occurred in SQL server?
Hello, I just wanted to go to this site, but this error pops up: error SQL
An error occurred in SQL server:This isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server. Please contact your host and copy the above message.
Please help me, I just moved my computer so I had to disconnect from the internet, but now he has problems.
Is the site I tried to go to: http://www.minecraftforum.net/topic/227822-166-millenaire-npc-village-076c-duplicate-villager-fix/
Hey Brainiac,
1. are you encounter problems with this site?
2. are you able to connect to this site from a different computer?
3. were you able to connect to this website before?
4. you remember to make changes to the computer before this problem?
The problem seems to be, with the site that you are visiting. You can check if you can access the site from another computer.
Hope this information is useful.
-
I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem
You don't want to buy win8 until you have verified first this portable machine provides win8 drivers, or you ran the tool to advise win8 update.
PS You are sure that your version of win7 is bad, or are you just a «can be victum msg»
Your laptop has a restore partition hidden, from where you can restore you to factory State?
-
Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.
See my response in audition 3 error with installation
-
Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator
What is the format of your final work? How are you viewing? What version of Illustrator do you use?
Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?
Is your type on a layer that is set up to print not? Is your white type and position it to overprint?
-
This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.
Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.
If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.
-
I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.". Do not turn off your computer. »
- I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it. I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
- I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode. Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
- I also tried the repair your computer option to the F8 key. He asks me to log in as an administrator (but my password does not work). So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '. Once I'm in the "System Recovery Options". I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt. THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive. Here are the details of the I've tried in the "System Recovery Options".
- The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
- The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
- In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
- When I click on the system restore: it is said: "no restore points were created on your computer's system disk. To create a restore open system protection point. When I click on the system protection, it is said: "your computer is running in a limited diagnostic State. If you use the system restore in this limited State, you can't undo the restore operation. Help topics are not available in this State. " So I press OK, and I'm back to square one.
- When I click on startup repair: it says "Startup Repair could not detect a problem.
- I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
- PLEASE HELP ME! I need my computer for my college work. I can't borrow laptop my friend forever!
Hello
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Why the host computer is unable to connect to the smart camera on the network?
My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer. The two are running VBAI 2011. The camera has been moved to another location on the network and another computer is used as the host? The host
-
My CD/DVD will read DVD and my os drive but do not read the CD or audio
I recently restored my hard drive and now my cd/dvd will not play audio discs or software. It will read DVDs and my os drive, but that's all. any suggestions?
-
What determines the "Network address" field below? The reason why I ask is that we have servers of TMS (4), all the different functions of the service. We have also (4) VCS-controls, one recorded for each MSDS to commissioning. All VCS - Cs are con
-
Hallo ZusammenDa ich noch nicht so mit dem Programm service komme und ich gar nicht mehr weiter weiss, ich bad question yesterday nach.ICH möchte über einen Textbalken ein Glanzlicht (in form eines Weissen Strichs) fahren lassen. Sodass der Glanz nur
-
backups system state backups vs vm
HelloThere are a lot of practical documentation on system state backups, but what's the point of system state backups, if you are running backups of virtual machine using the vstorage api. I know that for the AD, a backup of the system state is bett