Problem with Satellite 1800 from startup

Similar Questions

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Quick BIOS problem with Satellite C875-10 t

  Hello
  I'm having a problem with Satellite C875-10 t my sister
  Thought it might be useful to enable the setting "fast bios.
  and this occuered be the worst idea to have!
  I am more able to again access the BIOS,
  Despite my cd penalty that no longer starts, I'll have to try it on another Pc to make sure that the cd is ok...

  Anyway, the computer runs windows8 and Toshiba hardware parameters that I downloaded does not (and was not done to w8 but seven times in fact... :/)

  I really need some help here and would really appreciate that someone of the Toshiba team would give me help on this!

  Thanks to you all!

  You can change it to normal mode again.
  Open the Toshiba system settings > BOOT > boot speed and change it to normal.
  Please do so and let us know if everything is OK again.

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Problems with Satellite A300 - 1GC XP install - CD does not?

  Hello

  I have a few looks to round in various forums and found no answer to everything.

  I have the Satellite A300-1GC and had (from last night) vista on it. As caused Vista
  a lot of problems with different programs, I decided to get rid of him.

  The problem is now--if I stick my XP installation CD it it bed "press any key to boot from CD".
  Do that and then nothing happens. The CD read head stops going back and forward
  but nothing happens at all. Not even the beginning of the blue installation screen.

  Any ideas where this comes from?

  The CD-rom can also be run in AHCI mode (can a CD player what do I do?) and requires drivers?
  I have tried various CD XP - neither work. The last one I had was with SP3 and build in February 2009 so quite recent.

  Clues?

  See you soon
  Tobimaster

  Hello

  In your case the question has nothing to do with the SATA mode (AHCI mode or Compatible) but it looks like the CD/DVD drive cannot handle the Win XP disc
  Why? Who knows

  Always is it that the CD cannot be read and so the installation can not get.

  Try to copy this disc by using another computer and then you can try using the disc copied on order to install Win XP.

  Just FYI: I use TDK (CD and DVD) r discs... I am very satisfied

• Several problems with Satellite A100

  Hello

  I was wondering if someone could point me in the right direction with regard to the fixing of my computer!

  I have supply problems with my Satellite A100 laptop that I bought in europe 2 years ago. When the battery is run-down completely the computer will not run / start at all when it is plugged into the wall. It shows a light indicating that the battery is in charge even the domain controller in the light does not appear. The laptop must load for at least 1-2 hours before I can activate it. Push the power button to the computer also turn on / off the light sometimes. I can't use the computer at all until the same fully charged battery if light shows it is plugged into the wall. The outlet is fine.

  I also have other issues. First of all the computer not as to the rename files - often said that they are used, but they are not. Secondly, I have problems with toshiba recordnow cd / dvd burning program. I can open the program, but when I close it will not open until I have sign out and then sign back in. Thirdly, my computer love is no longer my sony digital camera memory cards if put directlt in laptop - it is said that they can be dangerous and will not access.

  Thanks for reading!
  Shona

  PS my laptop does not at all depend on when the battery is removed and the laptop plugged into the wall.

  PPS. my laptop model is Satellite A100 - 163, PSAA9E model number

  Hello

  regarding your power problem:

  It seems that your motherboard is faulty. I had the same issue with an A100 and after replacing the motherboard, the problem has been resolved. They told me it was a kind of resistance or something as preventing the machine from power.

  The question of the name change is only registry related since the registry controls the access to the system. So you log on with an administrator account or with a regular account that was created for do not connect as an administrator of the computer?

  If not please google for "cannot rename files" that gives results much more then ask someone here. The registry could also be a cause for the issuance of recordnow!

  I Don t think that the card of your digital camera and your pc Don t like. Installed antivirus software? This might also be the reason.

  In your case, I suggest to bring your machine to an ASP (authorized service provider) and allow them to perform some checkup and proofreading materials.
  Back up your important data, and then perform a full restore of your machine (can be done with the recovery media supplied).

  See you soon

• His problems with Satellite A100 (PSAA8)

  I constantly sound with the laptop problems. While I hear the windows startup noise and beeps, I cannot hear any sound of things like CDs, iTunes, Media Player – in fact an error message will still appear. In Media Player, the error message "Windows Media Player cannot play the file because there is a problem with the audio device... "appears. I have a standard pre installed Realtek Audio thing on my laptop. I tried to download a newer driver from Toshiba support center, but I don't know what to do with the zip file. Also in Control Panel, sounds, everything is gray.

  Hope someone can help cos I am going nuts with this :-)

  Thank you

  Hello

  The downloaded audio driver is compressed and before you start to install this driver you need to unzip it.
  You can use a free software, such as WinZip or WinRAR. You can download it from anywhere.

  I recommend that you first remove the sound card driver and Device Manager, and then install the new version downloaded from the page of Tosh.

  Good luck

• Problem with Satellite Z830 restart when you wake up

  Hi all, I have an occasional problem where when I wake up my Z830, the screen will become black, restart the computer, and I get the screen "Windows did not shut down correctly.

  It happens from time to time, but I think with the following sequence of events:
  1 put the computer to sleep by closing the lid
  2. pull out the computer by opening the cover

  Once I restart using the 'start Windows normally' option, all right.

  Does anyone else know this? I love this phone, so not thinking that there are already problems!

  > Happens from time to time, but I believe that with the following sequence of events:
  > 1. Put the computer to sleep by closing the lid
  > 2. Wake the computer by opening the cover

  Does this happen if access mode sleep otherwise? for example clicking on the Start button and choosing to sleep?
  This happens with the hibernation mode too?

• Temporary solution to load problem with Satellite C650

  I here provide a temporary solution to loading with Satellite C650 problem, which I have faced.

  First of all, I've updated my BIOS. After that, I removed the battery and plugged AC for 2-3 minutes.

  Then replace the battery and it loaded.

  However, the battery got charged up to 99% only and after that the interrupted load and the load remained at 99% and renewed battery indicating "plugged in, not charging."

  Therefore, each time I hv to repeat the procedure above to charge my battery.

  If any1 has the solution to the prob. above, it would be gr8 to hear.

  Thank you very much!

  Thanks for your posting.
  To be honest I really don t know what else you can expect and test it with new battery.

  I think that your laptop model must always have a warranty valid, right?
  If so, contact Toshiba nearest service provider and ask for replacement.

• Problem with Satellite Pro 4200 series USB (4270)

  Hello

  I'm having a problem with my usb port, it doesn't seem to work properly. I did an update of the Bios, which solves nothing. I changed the drivers (Windows 2000 Professional service pack 4) which did nothing either. Plug-and-play does not activate even when I plug something into the usb port. At first I thought that maybe the USB has been damaged, but when I plug my webcam, it lights up briefly, and since it is powered from the usb, I hope this means that the usb port still works. I tried to plug in scanner m, my printer and my camera, with all the different drivers, with which they came. Nothing works. Windows 2000 displays not all conflicts with all the drivers. I've also disabled in BIOS, all other ports (LPT1 COM1 COM2) using the IRQ11. What could be a solution to this problem?

  Hello

  Well, as far as know that the operating system is unable to recognize the devices if the external USB device needs more power than the USB port provides. In this case, the USB devices must have an external power supply.
  In addition, try to remove the USB port on the Device Manager and restart the operating system.
  After the restart of the operating system should recognize the USB ports. Maybe this procedure solves the strange USB problem.

  Please let me know if it works.

  Good bye

• Windows XP starts problems with Satellite M30

  My M30 has operated for two years until a few days ago when he suddenly would ' t restart after running a Microsoft security update. He gave me different boot in safe mode options, normally, etc., but none of them work.

  I was told that if I use my recovery DVDs. It will clean my drive hard and with him all my files. I understand that my Windows XP software is on this DVD - I certainly don't have a disk full. It is true that I will not have the opportunity to try to repair or to cure the problem and if so will it buy an OEM Windows XP and install it separately? Or should I do something else entirely?

  Can anyone give me any help would be appreciated.

  Thank you

  Hello

  Tried set your windows to an earlier point of your 'system-recovery-point' that appears with the options-> boot in safe mode - boot in safe mode with network - etc.etc...

  It this fails, then you need to recover your entire system.

  In the first, true it s: you can't heal or repair your system with the recovery dvd, you can just reinstall your entire system and you have an operating system as the first day after you bought this machine.

  So, your only choice will be to reinstall your system to correct it, and to avoid the installation of EACH update to Microsoft because I had a lot of problems with some updates that causes my machine to do things like non-boot or some software crashes. It s better to stay informed about updates and install them just after you verified that the isn´t of update affecting your system stability or performance.

  To back up your files and recover your system, that you have to do following things:

  You said that your system is not initialized, but you need your files.
  Just take a UBCD4Win (http://www.ubcd4win.com/) from the Internet and initialize with this CD. You will have access to your files with this WindowsPE on CD and you will be able to back up your data on a USB drive or burn your stuff on the CD.
  Now, you need to start the recovery cd and let the automatic installation script do the rest. It will delete your entire hard drive and reinstall the system. After that, you can put the data saved to your hard drive.

  I hope that I might be able to help you. If you have any other questions just ask.

  Welcome them

• The SD-R2612B Combo drive is compatible with Satellite 1800-314

  Please help with the following upgrade:
  The SD-R2612B Combo drive is compatible with the 1800-314?
  Is the version of the BIOS relevant?

  Hello

  Sorry, but I think that this kind of information you can get from a partner Service. Contact with them. You can find Service partners authorized on

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye