Problem with strtok and a chain with '-' home ' end

Similar Questions

• Problem with home screen blackBerry Smartphones

  Recently discovered that the button to set up the grid at the bottom of the home screen disappeared.  The only way I can get must now press the bar indicator flow near the top of the screen, how the button appears at the gate, but the white screen "you currently have no new notification" that appears when I pressed first the bar flow indicator, stand behind the grid.

  However if I have a message waiting for me and I'm in the indicator feeds bar that I can not display the message.  I first have to open the flow indicator, then open the gate, then select message to open it.

  The only way to close the indicator feeds also bar when its open is to press the screen.  The buttons cancel/return and Cancel do nothing.

  Hope someone can help with this problem.

  Thanks in advance.

  Welcome to the forums!

  Have you tried a hard reset of your device?  With the unit powered on, remove the battery for a few minutes, then replace.  See if that sets things straight.

  What OS you have on your device?  Might be time for a new installation of the operating system, too.

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• Problems with El Capitan on iMac 27 "end 2013

  Hello. I had some problems with my end 2013 27 "iMac. The majority of my problems seems to be turning around not being able to wake from its slumber unless I hard boot the system. I am running the operating system more recent 10.11.3

  Sleep problems have started with my installation of El Capitan. I have reset the PRAM the SMC and have disabled the hibernation and Energy Saver preferences are set to never spin down hard drives or screen saver. Problem persists.

  I also experience unexpected freezes. When these occur usually, audio on my system continues (if listening to iTunes or in a video game, the audio keeps going) but there is no response from the mouse or the movement on the screen at all. key board does not respond and mouse is frozen. The last time I had it's happen I had a panic the kernel to reboot (see below for the report)

  I tried everything I can think of. I've scoured the forums on the internet for help and support. Im not sure if this is hardware or software related. I tried to unplug all of my devices - I have several hard drives USB and Thunderbolt. I have a second monitor connected via the bolt of lightning as well. This could be a video card problem?

  I have used the EtreCheck software and have gotten several things that make me wonder if it's the software however, it seems that somewhere I still have pieces of teamviewer lingering around, even if I had uninstalled the software and I can't find anything in the spotlight for her. Here is an excerpt of my report...

  Launch of Agents:

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [failure] [Support]

  com.adobe.AdobeCreativeCloud.plist [failure] [Support]

  com.coupons.coupond.plist [loading] [Support]

  [ongoing] com.extensis.FMCore.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  com.TeamViewer.teamviewer_desktop.plist [failure] [Support]

  Top of the process of memory:

  2.28 GB com.apple.WebKit.WebContent (15)

  2.21 GB mds_stores

  1.54 GB kernel_task

  467 MB softwareupdated

  393 MB Spotify Helper (2)

  Some things I noticed - I had questions on shut down the system. My computer completely sometimes turns. I have to force quit the finder or the dock still will remain open and prevent the closing down. If this happens, then I need hard closed by pushing the power button until the device turns off. My system is INCREDIBLY slow sometimes since the upgrade as well at el capitan.

  I had a few problems with the big Adobe applications as well - sometimes illustrator or photoshop does any open or apps say they are open in the dock and in the force to quit smoking, but do not show in the activity monitor. In this case I have to restart my system for most work. force quit does not help them.

  Sorry for the long post, but I have worked on Macs since OS7 and even worked in an apple store genius bar for awhile so I generally know what I can do to fix these but I can't get it probably remain fixed. I thought better to have as much information as possible. My next step is to reload the entire OS, but I have a lot of work here that I'm afraid to lose (even though I have several back ups via time machine and other copies on external drives)

  Any help and advice would be most appreciated!

  Thank you!

  Anonymous UUID: F83C5E07-71C2-E17D-65DC-8C631B76C5D0

  Mon Jan 25 12:21:24 2016

  Panic report *.

  panic (cpu 0 0xffffff800b5254ce appellant): "an element of the liberated area has been modified in the kalloc.128 area: expected 0xffffff803c0bd080 but found at the offset 0 128 in the 0xffffff803c0bdf00 element, 0xffffff803c4bd080, bits 0x400000 changed cookies 0x3f001131d5890016 0x53521f0c6426431"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/osfm k/kern/zalloc.c:503.

  Backtrace (CPU 0), frame: return address

  0xffffff82c89ab180: 0xffffff800b4df792

  0xffffff82c89ab200: 0xffffff800b5254ce

  0xffffff82c89ab270: 0xffffff800b524f76

  0xffffff82c89ab2b0: 0xffffff800b523c02

  0xffffff82c89ab3e0: 0xffffff800ba804db

  0xffffff82c89ab400: 0xffffff7f8d12b505

  0xffffff82c89ab440: 0xffffff7f8d12b6c7

  0xffffff82c89ab460: 0xffffff7f8d2328df

  0xffffff82c89ab490: 0xffffff7f8d25e96c

  0xffffff82c89ab4d0: 0xffffff7f8d25e4c6

  0xffffff82c89ab500: 0xffffff7f8d25e0f0

  0xffffff82c89ab540: 0xffffff7f8d3e71fc

  0xffffff82c89ab590: 0xffffff7f8d3dbf7a

  0xffffff82c89ab720: 0xffffff7f8d20d227

  0xffffff82c89ab7d0: 0xffffff7f8d14c1ac

  0xffffff82c89ab890: 0xffffff7f8d159c6d

  0xffffff82c89ab900: 0xffffff7f8d09025d

  0xffffff82c89ab970: 0xffffff7f8d0964e6

  0xffffff82c89ab9b0: 0xffffff7f8d13ea07

  0xffffff82c89abab0: 0xffffff7f8d098872

  0xffffff82c89abb50: 0xffffff7f8c8619c4

  0xffffff82c89abb80: 0xffffff800bab7ef8

  0xffffff82c89abbf0: 0xffffff7f8c861a2b

  0xffffff82c89abc40: 0xffffff7f8d098727

  0xffffff82c89abc90: 0xffffff800b7607d4

  0xffffff82c89abce0: 0xffffff800b758523

  0xffffff82c89abdb0: 0xffffff800b75873f

  0xffffff82c89abde0: 0xffffff800b9cf9d6

  0xffffff82c89abe20: 0xffffff800b988cab

  0xffffff82c89abe50: 0xffffff800b9ca37d

  0xffffff82c89abf60: 0xffffff800ba2a731

  0xffffff82c89abfb0: 0xffffff800b5f0a36

  Extensions of core in backtrace:

  (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000-> 0xffffff7f8c885fff

  com.apple.iokit.IO80211Family (1110.26) [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000-> 0xffffff7f8d114fff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.kec.corecrypto (1.0) [D6E082B5-93B2-3FF0-AB4B-4AA310173CE8] @0xffffff7f8 c1e9000

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  com.apple.driver.AirPort.Brcm4360 (1020.17.1a1) [1D44A63A - 83 A 8-335C-BBF5-62965766 1B93]@0xffffff7f8d11e000-> 0xffffff7f8d7dcfff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.driver.mDNSOffloadUserClient (1.0.1b8) [DC173C97-9F4D - 39 d 5-8814-68B0BAD 27370]@0xffffff7f8cd42000]

  dependency: (1110.26) com.apple.iokit.IO80211Family [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8bd1a000 0xffffff

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  The process corresponding to the current thread BSD name: airportd

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000000b200000

  Text of core base: 0xffffff800b400000

  Text __HIB base: 0xffffff800b300000

  Name of system model: iMac14, 2 (Mac-27ADBB7B4CEE8E61)

  Availability of the system in nanoseconds: 67730969846

  last load kext to 62344320534: com.apple.iokit.IOBluetoothSerialManager 4.4.3f4 (addr 0xffffff7f8cf42000 size 57344)

  kexts responsible:

  com.seagate.driver.PowSecLeafDriver_10_5 5.2.7

  com.seagate.driver.PowSecDriverCore 5.2.7

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.GeForce 10.0.8

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.nvidia.NVDAStartup 10.0.8

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.8

  com.apple.nvidia.driver.NVDAResman 10.0.8

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Unable to gather system configuration information. Model: iMac14 2, 4 processors, Intel Core i7, 3.5 GHz, 24GO, BootROM IM142.0118.B12, MSC 2.15f7

  Graphics card: NVIDIA GeForce GTX 780 M, NVIDIA GeForce GTX 780 M, PCIe, 4096 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 111), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HDD, 1 TB ST1000DM003

  USB device: USB 3.0 Bus

  USB device: Elements 107C

  USB device: Backup + Office

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: FaceTime HD camera (built-in)

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: USB 2.0 Hub [MTT]

  USB drive: Microsoft Wireless Optical mouse¬ae 1.00

  USB device: External USB 3.0

  USB device: External USB 3.0

  USB device: My passport 0820

  USB device: My passport 0748

  USB device: FA GoFlex Desk

  Bus crush: iMac, Apple Inc., 23.10

  Please post the rest of the etrecheck report.

• Problem with the last 5 minutes of the audio book to cut

  My wife recently bought a Clip Jam for listening to audio books. She had a problem with the end of books - the device does not play the last 4-5 minutes of the last chapter of a book. IOW, it ends at the beginning. It must then go to the desktop PC and listen to the end of the book he (proving it is not a problem with the files themselves). She said that this happens on audiobooks, Audible and audio books, it is in MP3 format.

  Someone has an idea what can happen and how I can help him solve?

  using improved format audible AAX? IIRC: it is a problem only with improved AAX format. Use the Format 4 and that she must play to the end.

• Satellite A200 - inactive keys: CTRL, SHIFT, PG. PREC, PG. NEXT, HOME, END

  Hello

  I have a Satellite A200 and there is a week, some of my keys just stopped working.
  All the keys CTRL and SHIFT (left and right), PGUP, PGDN, HOME, END, are inactive.

  I uninstalled the keyboard from the Device Manager and autoreinstalled to start the system, but nothing happened.

  Is there a key combination to re-enable these keys?

  Thank you.

  Hello

  No, it doesn't have special key or combination of keys that could activate the buttons mentioned.
  This looks like a malfunction of the keyboard for me.

  Just a question; You can use all those buttons by using an external USB keyboard?
  Would be interesting to know if this is possible

  However, I think that the keyboard is affected and must be replaced by a technician of the ASP.

• Is there a problem with firefox does not, it's happening on all our computers at work and at home. It takes about 10 seconds, then stops responding.

  I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.

  To return to regard to extensions, you can view and update the extensions on page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.

  You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).

  Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

  I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

  Thank you

  Hi Bob,

  You can consult the following links of wire and check if it helps.

  Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

  With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

  Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• I have a windows 7 Edition licenses Home premium, still a problem with my words and exlel files.

  I use a copy of the license of windows Home premium 7, still I have a problem with my microsoft words and files, words excel files tke several minutes to open, but Excel files not not oped in my laptop, before I didn't have any problem, but now it's huge. When I ask some of them on the market, they suggested me to take the 32-bit and add 64-bit. Windows, it is the only solution for the same.

  Please suggest,
  Abhijit Gohan.
    

  Try to reinstall or repair your copy of Microsoft Office:

  How to reinstall or repair Microsoft Office : Notebooks.com

• Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

  I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

  LindaSView

  Hi Linda,.

  Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

  If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

  I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

  Good luck!

  Kosh

• Problem with WIN 7 and XP Home Network

  I have a home network with 2 cable to the PC through a D-Link N Router extreme. Main PC is WIN 7 and XP Media Center. When put in first place, worked well, but PC now recognizes the other, nor so I can share files more. The two PC's have Internet access through the router, but cannot communicate with each other. I did all the trouble shooting suggested with no luck. Firewalls appear correctly implemented yet. Can someone help me understand this?

  Network Assistant served twice trying to restore the Home network, but still no luck. Other devices may wireless connection to the network & Internet successfully. Printer is connected to the router USB and used all the devices until this problem with XP unit. Utility said Shareport printer is available, but the XP unit will not connect. I am frustrated no end... help, please!

  Hello.

  I had this problem once I still have XP on one of my machines and the way I fixed that using Workgroup, use this site I used to fix my problem, simply ignore the part printer but it will solve the problem you have: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• Problems with Windows Vista and Quicken 2010 home and business

  While restoring a quicken 2010 file backup of the Windows XP computer to the Windows Vista-based computer, the categories are not loaded

  Hello

  As you are facing problems with Quicken 2010, I suggest you check the link for support:

  http://Quicken.Intuit.com/support/Windows.jsp

• Problems with iPhone 7 Plus the 'home' button?

  Today, I stopped at a store and looked at the time of 7 more for the first iPhone. I was curious about the new home of the haptic button.

  I didn't feel a thing well. I thought there might be a setting and so I asked a salesperson. He said he "thought" he could feel a bit and had me try things like closing an application and return to the home screen. But no matter how gently or strongly I pressed the home button, nothing happened. Once opened Siri, but then I couldn't close it.

  He couldn't have worked either do.

  So, while I admit that my "sampling" is small, with 100% of all so far the 7s iPhone I tried the home button does no haptic feedback and does not work well.

  As it was a display model, of course, I'm curious - are these kinds of common problems?

  I just posted my concern in this regard. I have the 7 +.

  and the home of the Taptic button does not work. I have to still physically, press on the

  button as I did with the 6 +. So what is the difference?