Problem with the playback of media files

Similar Questions

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• Problem with the playback of an audio .asx file in Windows Media Player.

  Hello

  I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

  I get the following in a pop-up error message:

  Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

  Help, please.

  My email address is * address email is removed from the privacy *

  Thank you.

  -HimAlandi

  Hello

   
  1. facing this problem with the .asx format?
  2. you remember to make changes to the system?
  3. where is the file?
   
  Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
  Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
  If you encountered this error by clicking a link on a Web page, the link isn't valid.
  If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
  The following is a list of protocols supported by the player and the correct URL syntax examples:
  
  (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
  (b) http://server/filename
  (c) rtsp://server/filename
  (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
  If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
   
  To configure the protocol settings
  (a) in the Player Windows Media, on the Tools menu, click Options.
  (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
  (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
  If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
   
  To rename the folder of information networking of player.
  
  (a) close Windows Media Player. (To do this, on the file menu, click on exit).
  (b) to make the changes that you will be able to see the hidden files and folders
  Show hidden files.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files
  (c) click Start, and then click computer.
  (d) open the disc drive Local (c :)), open to users.
  (d) open your user account.
  (e) open %APPDATA%\microsoft\windows\sendto and open Local.
  (f) open Microsoft and open Windows Media.
  (g) click on the file and rename it.
  (h) if the file is name12.0, edit as file name as old 12.
  (i) restart the computer and check

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• Problem with the creation of text file 9530 unit

  Hello

  I created the text file in the memory of the device "file:///store/home/user/sample/mytext.txt" with a text using my application. He created the file with the extension "mytext.txt.rem". While I couldn't able to read the same file.

  I tested the same application with 8520 and its works very well... It creates the file "mytext.txt" only.

  I don't know why the name of the text file adds extension ".rem" in 9530.

  Could you please help me to findout the solution?

  Thank you

  SmartPhoneDev

  You have enabled encryption.  Have a look here:

  http://supportforums.BlackBerry.com/T5/Java-development/why-my-text-written-to-a-file-on-the-SD-card...

• Problem with the playback of the ToDo of ToDoList items

  Hello

  I'm at the end with my knowledge about a problem when I try to read some fields from the list of ToDo and ToDo native application.

  I don't have a problem to read for example the name of a ToDo item with the following code:

  String taskName = task.getString(ToDo.SUMMARY, PIMItem.ATTR_NONE);
  

  But when I try to read the finished field, I always get and IndexOutOfBoundsException. The reason is that I am doing something wrong with the index, the second attribute. Here is the code:

  boolean taskStatus = task.getBoolean(ToDo.COMPLETED, 0);
  

  I found examples how to create a new item Todo, but how do I read a Boolean value in the ToDo list?

  I'm at the end with my knowledge, maybe someone of you can help me, thank you already in advance

  
  

• problem with the playback of the record to Captivate (sensitive design mode) 8 screen

  I use 8 Captivate sensitive design.  I did some screen recordings (in demonstration, training and assessment methods) and that whenever there is a short video clip (for example by dragging a bar window or a cursor on the screen), it plays fine in design mode, but then when I publish the entire project for the preview, the clips are suppressed.  It seems that these clips are integrated into my slides Fund and are in SWF format.

  I wonder if they do not play properly is because I publish to HTML5.  If so, how can I convert these small clips SWF to something else?  And if not, what else could be wrong?

  My solution is to replace these slides FMR (having a camera on the film) which sometimes cause issues when publishing to HTML5, cpvc slides, if I can't avoid them. Very often, you can avoid dragging the mouse: example is to click on the scroll somewhere bar instead of drag in the scroll bar, to use the hotkeys etc. When you can't escape a "video shift' stop recording, use the big slides, video demonstration or Insertion button, slide CPVC and you will get video demo mode, where you can record video (its editor-in-Chief is much more powerful than the limited functionality of FMR-edition). When you are finished with the cpvc-slide, you can continue capturing software with slides, software simulation (he is lacking in the Insert menu for some unknown reason). It's more work, I know, but will play in HTML5 (these slides are converted to MP4), its quality is much better than FMR and you have video editor if necessary.

• Problem with the playback of the external SWF sound

  Hello

  I need to load the external SWF file, which contains the simple + audio image sequence. I used the MovieClipLoader class for this and also a preloader, where I check if I can run the SWF safely, without having to pause later and continue with loading. It works similar to video YouTube, where the video is buffered.

  The problem is that when I load the SWF file and run it, the audio start to play later. I tried more cases and the reason is that even if I load enough of the SWF, I can be certain I can start reading, because it is not enough for audio, if you start playing a little later. When I insert more, the audio begins to play immediately.

  So the question is, is there a way how can I check if the audio is loaded and ready to play?

  Thank you

  Michal

  If you can inspect the external swf fla enough to know that synchronize sound is set to stream, you should be able to look at the scenario where the sound is attached and determine the number of images, the sound is.

• Problem with the opening of PDF files

  so my problem is that I can not put an Adobe Reader as main software to open PDF files.

  I try with this

  Select a PDF file on your disk. Right click, choose "open with > program chose. Select the drive, and then click the box that says "use the selected program to open this type of file.

  but nothing happens when I select drive. It shows that even on the 9 and 10 version. I try to reinstall, and it does not help...

  Please take a look at the response of Ramesh Srinivasan on: th-open-with-menu/76b17b64-2fe3-4c08-ac80-0ba80334dd8e http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/problem-wi

  This should solve the problem.

  Ankit

• problem with the playback of videos on all computers since version 31

  all my pluggins are until this day I have reset firefox and even not formatted pc no solution...
  some read the audio on the video, but with a green image on flash videos, others play any audio and video.
  movies on blu ray rom play fine with audio and ietab videos play fine! Quite a problem for firefox...

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Problem with the playback of audio books

  Hi, I wonder if anyone can help please I have a problem of reading audio books on my rocket.  The problem occurs when I download audio books from my local library; the library allow it, are aware it will be downloaded to an MP3 player and no permit is required.  Most of the books are multi frame for example from 1 to 10.  I have download all 10 parts of my rocket.  Parts 1 & 2 always play without problem. When I try to play other parts 3, 4 etc. they will not play and I get a message saying: 'you can get the license by transferring the title to the device using software audiobook.  No license is required and he plays parts 1 and 2 with success.  I tried to download only 1 & 2, they play, then delete 1 & 2 and 3 & 4 download, they will not play and I get the same message.  In parts 1 and 2 of any book, I download play, the rest of the parts will not and the message above.  In the past, I managed to download books and had no problems.  I would be grateful for any help please?  Thank you.

  Thanks to this solution of sugested.  I now have the issue resloved, namely that I don't have my camera "MPT" the value of the parameters of the USB, it has been updated the 'MASTER '.  I made the change deleted audio books that are not open, downloaded again and now all THE game pieces.  I have this post (1) to say thank you and (2) in case it helps someone else.

• Problem with the playback of database Sqlite.

  Hello guys,.

  I created a SqLite database and create a Table and insert three records in it.

  But when I try to read data from it.

  So no errors are there and given no reading from the database.

  I am facing this problem since 2 days.

  What shoul I do it.

  I write this code to read the data

  Try
  {
  URI uri=URI.create("file:///SDCard/Databases/SQLiteGuide/"+"MyDatabase.db");
  d = DatabaseFactory.Open (Uri);
  Statement st = d.createStatement ("SELECT name, age FROM people");
  St.Prepare ();
  St.Execute ();
  net.rim.device.api.database.Cursor c = st.getCursor ();
  Line r;
  int i = 0;
  While (c.Next () == true)
  {
  r = c.getRow ();
  i ++ ;
  Add (new RichTextField (i + ".")) Name = "+ r.GetString (0) +", "+" Age = "+ r.getInteger (1)));" "" "
  name.setText ("Name->" + r.getString (0));
  age.setText ("Âge->" + r.getInteger (1));
  }
  if(i==0)
  {
  Add (new RichTextField ("no data in the table"));
  }
  St.Close ();
  d.Close ();
  Dialog.Alert ("show file");
  } catch (System.Exception e)
  {
  System.out.println (e.getMessage ());
  e.printStackTrace ();
  }

  I find the Solution myself.

  Thanks to you all.