Problems with the conversion of Word files to PDF via macro

Similar Questions

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• What is the problem with the conversion of objects with gradients to the gradient mesh?

  What is the problem with the conversion of objects with gradients to the gradient mesh?

  Radial gradients are special, and it could become difficult edit the gradient mesh resulting.

  Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Problem with the help of Word 2000 with Vista computer

  I installed MS Office 2000 Pro on my Vista platform.  Everything works EXCEPT the word.  When I start word
  I get the Basic with no toolbar window, a blank page and nothing else.  I get the following message when I close it (using the Task Manager, as the program is not responding).  I've seen this problem on the forums, but nobody seems to have an answer, and I tried to do it intelligently as to what is causing the problem by searching for each of the
  hang the signatures, but can't seem to find, so I can't say if there is a conflict or what.  I uninstalled and cleaned the registry, files and such usually left over after uninstall, but have still not luck with Word, well that whenever that everything else works.  If I could give a meaning to the coding in signatures hang I would try but I'm not a programmer and outside to recognize that part of the encoding is hexadecimal, I am operated by.  Any help would be appreciated!

  Problem event name: AppHangB1
  Application name: WINWORD. EXE
  Application version: 9.0.0.6926
  Application timestamp: 3d97fbe5
  Hang Signature: c816
  Hanging Type: 2048
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Signing of additional blocking 1: 2caec44e7e7e8dfd8bdd5135c9f2c06f
  Signature of blocking additional 2:3836
  Signing of additional blocking 3: 73e71ef1bba65b88e350215256a221ae
  Signing of additional blocking 4: c816
  Signing of additional blocking 5: 2caec44e7e7e8dfd8bdd5135c9f2c06f
  Signature of blocking additional 6:3836
  Signing of additional blocking 7: 73e71ef1bba65b88e350215256a221ae

  To the best of my knowledge of the version of Office Pro that I use is 9.00.9327 with Windows Vista Home Premium OS.  All the MS current updates are installed with the exception of. The PS Office since I couldn't get the program to run right, that I thought I'd add Ms could make the problems worse.  The computer is a Toshiba Satellite with processors Dual Core Intel, 4 GB of Ram and 230 GB HD

  Hello

  Welcome to the responses of the Forums.

  For assistance, you try the Groups of Discussion Office rather (look for the Word Newsgroups):
  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Thanks and good luck! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Problem with the conversion of pdf to IBR

  Hi, I have problem with IBR excel file conversion. File do not have a password, but in newspapers, I have:
  

  Manager of tasks/7 02.14 10:46:19.732 TaskLauncher_CmdLineConversion_44409_exsimple_stderr read 72 bytes: EXOpenExport() failed: file is password protected or encrypted (0x000B)

  Excel has macro and security for the worksheet.
  
  I can't find any post or information about it.
  Any idea, documentation?

  refer to http://docs.oracle.com/cd/E23549_01/doc.1111/e10800/c03_pdfi_all.htm#CIHCGCJA

  "To avoid a conversion of a file Microsoft Office expired, all functions that require a user input must be disabled. It is password protection, security notifications, such as disabling macros, and requests for online access to show online content or participate in programs of feedback from users. For more information about how to disable these and other similar goods, refer to Microsoft documentation for each product. »

• Problem with the creation of text file 9530 unit

  Hello

  I created the text file in the memory of the device "file:///store/home/user/sample/mytext.txt" with a text using my application. He created the file with the extension "mytext.txt.rem". While I couldn't able to read the same file.

  I tested the same application with 8520 and its works very well... It creates the file "mytext.txt" only.

  I don't know why the name of the text file adds extension ".rem" in 9530.

  Could you please help me to findout the solution?

  Thank you

  SmartPhoneDev

  You have enabled encryption.  Have a look here:

  http://supportforums.BlackBerry.com/T5/Java-development/why-my-text-written-to-a-file-on-the-SD-card...

• Hi, I need help with the conversion of my document in PDF format. Its no longer works.

  I've always been able to convert my word into a PDF file documents now all of a sudden its not working. It takes forever to process information, and then after that I waited it said that this service is unavilable at this time. I really need this problem fixed as soon as POSSIBLE because it affects my business

  Hi ashtonwintle93,

  Looks like you may have an outdated version of the player. To use the service online ExportPDF, now, you must have Acrobat Reader DC. You can download it here: https://get.adobe.com/reader.

  Best,

  Sara

• Problems with the conversion of files to the word

  I recently downloaded the judgment of Adobe Acrobat Pro XI for the possible purchase of my company.  I would like to convert it the letters that I worked with for Word while trying to work in Adobe.  When I did this, changed the dynamics of the letter.  It likely to change the letters, or even come as winddings.  What I am doing wrong?

  What I am doing wrong?

  Nothing. You simply overestimate the powers of the process. This is an approximation, but 90% time of manual editing and cleaning of files that results is necessary.

  Mylenium

• Problem with the conversion of Midlet (jad/jar) cod file (Jasymca 2.0)

  BB Storm last official OS.

  There is this wonderful program called Jasymca 2.0 which is a combination of programs of mathematics MATLAB and MAXIMA of high-end (subset to fit) and written in J2ME as a MOPED. To see a demo of it, go to http://webuser.fh-furtwangen.de/~dersch/jasymca2/indexEN.html and click on demo on the left. It's quite impressive... able to make the symbolic math and math matrix among others. The ultimate calculator for a PDA... and the best I could find out there.

  The only problem is that it is written in J2ME as a MIDLET and the runtime is stored as a combination of jad/jar. Now, I tried the standard conversion using the CAP as follows...

  CAP import = "C:\Program Research In Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar" code name is jasymca-midlet jad is Jasymca.jad Jasymca.jar

  It seems to work very well. There are a few warnings about unused variables, but that's fine. The last line was "No Errors".

  .. .and he left me with a file .cod 229K

  When I insert it in my blackberry through javaloader, it loads very well.

  However, when I look in my download directory I 2 files related to Jasymca and not running.

  I suspect that it is because the cod file is too big. Is there another step I can do for the cod of the loadable file?

  Any help is appreciated.

  Thank you

  -Donald

  It takes more time than I expected.

  There is a preprocessor directives in the source files and to leave JDE to understand these guidelines, I need to modify the jdp.

  I stopped the investigation

  But I will say that I found.

  icons and data files must be located in the default folder.

  If the root folder of the package is src\

  path of the icon should be: src\myicon.png

  for now the icons are located in the src\icons folder

  in this case the image files are not accessible from the BlackBerry App.

  The second: there are some files showed up as the symbol file name first.

  JDE does not add these files to the project.

  I think that the best way would be to contact the developer of Jasymca and talking to him about the Jasymca and porting for BlackBerry

• Problem with the playback of media files

  I'm unable to read the files directly by any player... Each time, I have to choose 'Open with' Option.I has even changed the Option default WMP or VLC etc... But again if I want to play another file... I have to redo the same process... How do I solve this problem... ???

  Hello

  WMP have not perhaps not all of its default settings. Go to control panel, click default programs, and when this window opens click Set your default programs, and then when that window opens click on Windows Media Player in the list of programs, left column and in the right column, click Set this program as default. Wait for the app finally assigning all faults and then OK and then close the Control Panel application.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Problem with the conversion of Partition Boot Camp

  I would have just dl and installed the trial version of 3.0.  After running and by selecting the boot camp for the boot partition, merge began to 'prepare' the partition for use.  After about 45 minutes, the process had not been completed.  I grew up the activity monitor and found that the process did nothing.  I closed the process, thinking I could start over again at the launch of Fusion.  Wrong, merger saw the partition boot camp into a virtual machine that could not be started.

  Is there a possible way to start the process of 'preparation '?  It is apparently the only way to correct the problem.

  Tried from a support ticket, but could not do while I wasn't a registered owner.

  I'm trying to make my choice between Parallels and Fusion, or just stick with BootCamp.  I hope someone can help me with this problem.

  Harry

  Dear Harry,

  I did the same thing yesterday. My BootCamp partition has Windows XP (SP3) and I also have Parallels. I'm now trying to decide if I stay with Parallels or Fusion 3 (to take a possible advantage over the 64-bit @ Snow Leopard).

  My upgrade was fine, it took about 15 minutes to get BootCamp running on the merger. A small step has been to re - activate my XP with Microsoft license, because the "material" changes. I have the MACBOOK PRO 13 '' 2.53 with 4 GB of RAM. I don't really have time to play yesterday, but between Parallels and Fusion 3, (64-bit), I did not see too much improvement on the 'speed '.

  An advantage of having any of virtualization software, is that you can have multiple operating systems running, such as XP, Windows7, etc. I need that because my work, the developer. If you can stay only with an operating system, I guess, BootCamp works very well.

  Kind regards