Problem with the webcam works in reverse.

Similar Questions

• When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...

  I am trying to publish in my domain on windows server, but I have a problem with the form...

  The server must be linux to work the form?

  Thanks in advance for your help...

  Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?

• Problem with the webcam doesn't work is not on the computer.

  Hi I have a dv7 6166nr povilion when I ck the Manger it says my webcam works well but the cam says its not detected or must be activated. Im running Windows 7 the progam is cyberlink youcam 3.5 its driving me crazy I know that it's just a driver, but I can't seem to find it.

  Hello

  You can try to uninstall and reinstall the camera software and check if that helps.

  Thank you.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• Problem with the webcam does not.

  my pc is that Sony with windows7.the webcam is not working... I found the Webcam listed under devices and it say works correctly

  A question for Sony support or their forums as the webcam is a built-in feature of Sony

• Problem with the tiles work is not on the computer.

  My tiles does not work since I got the new 8.1 (or was) new updated

  Its been irritates me for some time now, I can open Viewer, image and music in tiling, but other applications as soon as I click on them
  Simply close it.
  Thank you!

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Solve problems with a soft

  Difficulty App Store in Windows 8.1
  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• Problem with the keyboard work is not on the computer.

  my keyboard works in BIOS, but not on windows, if I look in Device Manager, it seems that it is not detected, same result if I ask to install new hardware it says no new hardware found

  This problem is more than a FEW DAYS OLD?  How the question, "my keyboard works in BIOS but not in windows" would be only a few days old?  Don't you have the machine but left on? Heh

  If possible, restore back those days (if these days are before you wrote the question).

  The keyboard works in Mode safe?

  If so, the keyboard works for other users (create one if you haven't)?

  Is there any "unknown devices" in Device Manager?

  Other options that come to mind:

  1. Use the System File Checker tool to repair missing or corrupted system files
  2. Windows Vista repair install

• a problem with the webcam in inspiron 5520

  my webcam does not work, I don't know if all the rounds of 5520 dell have webcam or not? because I can't find webcam in devices in the Manager imaging device, and I installed the webcam central software

  Hi rana_hussam,

  Welcome to the community,

  First try to restore default BIOS. Press F2 at startup, on the page of the BIOS, press F9 to message setup defaults to press F10 to save and exit. After the system reboots and loads for Windows check if Webcam appears in Device Manager.

  If she does not appear in Device Manager, run the Diagnostics of Webcam, check out this link below:

  http://Dell.to/1A6Cl24

  The webcam showed in the tree of the symptoms?

  Error messages?

• having a problem with the webcam always says in use by another application

  Webcam always says in use by another application, when I click on switch or try again nothing happens

  Hello

  1 - is a built-in webcam?
  2. don't you make changes before the show?
  3. When you receive the message?
  4. What is the brand and model of the webcam?

  Method 1:
  You can also check in the Task Manager running other applications that use the webcam. If there is a demand then complete the application process and check.

   

  Method 2:
  I suggest you perform the clean boot and check if it helps
  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• I have a problem with the printer works is not on Windows 8.

  Original title: device

  my printer has stop working.  Convenience store tells me that the coils do not work.  How can I solve them?

  I suggest you to uninstall the printer and install the latest printer driver for the printer model you are using.

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Press Windows key + R
     Type: services.msc
     Press enter on your keyboard

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• I have a problem with the apps work is not on the computer.

  original title: apps stopped working

  All my apps stopped working - they do not launch when I click on the icon. This includes all Windows 8 native applications as well as third-party applications. The only 'apps' embarking on the splash screen are desktop applications that run in Windows normally. I can't go to the store, I can not open the calendar, email or anything else in Windows 8. I can always on the desktop, which is how I use my computer, most of the time anyway, but it's frustrating not being able to use applications. What is the solution?

  The way I solved the problem for me is that I downloaded the Windows 8.1 in ISO format update - http://windows.microsoft.com/en-us/windows-8/preview-iso

  This allows you to install it without going through the store, which was also does not work for me.
  -Nate

• I have a problem with the closing work is not on the computer.

  Original title: Shutdown does not work completely

  I notice that my laptop was not actually shut down properly and my slow laptop. For me, I always leave my laptop sleep after that I go to bed or put me to sleep... and I realize that my laptop is slow... So I'll check what's happening... and I think my top time is 8 days so this means that my laptop was running 8 days non-stop... so I stop my laptop and check again and what happen it didn't reset high time and my laptop was totally slow... so I try to restart and the time taken has been reset. and my computer laptop back to normal, it runs smooth...

  The point is that we don't know what the judgment in fact do not? Shut down your laptop computer or PC will reset all default function, which means that all of your running application will be nearby. In this case the stop not reset all my app running at default.

  You can check by yourself:
  Select TASK MANAGER > PERFORMANCE and find the TIME 'UP', it appears like this "0:00:00:0" and the equivalent of days: hours: Minutes: second

  Hello

  It's because of the economy of functionality in Windows 8. By default, the computer is made to start or stop faster, which is not supported by most motherboards. Follow these steps and the PC starts normally.

  Windows 8 is a new feature called quick start. It can sometimes cause problems as you mentioned as well as others. The best way to know if the problem is to disable and see what happens.

  This feature works only when you make a STOP and then start. It does not affect a RESTART.

  To turn it off, follow these steps:

  1. press Windows key + X, go to the control panel > Power Options and select choose what the power buttons on the left.

  2. Select change settings that are currently unavailable, near the top center of the screen.

  3. lower in the window, uncheck the quick start.

  Hope this helps, keep us updated on the status of the issue.

• I have problem with the Webcam.

  My webcam is upside down, I tried to update and uninstall then reinstall. What should I do?

  If this happens in one single program then go into the settings of this program for an option.

• problem with the window "work stoppage by program and click here for an online solution.

  When to start any program and then a msg of error that set the work stop

  Clik for the solution online

  Hi Sandeep.

  Kindly access the URL below and follow the same steps. Hope that maybe it's work

  http://www.howtogeek.com/HOWTO/7863/disable-error-reporting-in-XP-Vista-and-Windows-7/