Problem with virtual keyboard.

Similar Questions

• Strange problem with the keyboard

  Hello.
  I have problem with my keyboard. It works with delays. I don't know how to fix it.

  Hello

  What do you mean by working with delays?
  As far as I know, you can change the keyboard settings in the keyboard properties.
  Also, if you think that it s not a fault or parameters of software problem but hardware malfunction, you can try to contact the service agent.
  But before you contact the ASP you should recover the operating system.

  Good bye

• Problem with the keyboard and audio on Satellite L40

  Hello world
  I just installed XP SP2 on my Satellite L40 (BTW thanks to all of you who helped me overcome the problems during this operation with your son), but I have a problem with my keyboard. I have a QWERTY keyboard and after I installed xp, he worked as a qwerty, I fixed it, now all my letters are working very well, but I have some problems with certain symbols, such as @,., _, if you understand me.

  Could someone help me?

  I also have problems with my audio, in fact I have no sound at all, in the Panel, he said that there is no audio device found.
  I've seen a few threads which said that I should first install kb888111 and another thing is likely, but I can't find the other. I downloaded the audio driver from the toshiba Web site; Thank you for helping me in this area also.

  Good bye

  I have the same problem with the sound... I found hotfix kb888111 and I instaled this one... but when I tried to start installing driver sound a window popup say thet there is an error and cannot continue with the installation driver...
  I found hotfix kb888111 in this file that i have downloaded from the toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2...
  I don't know what to do... Someone else knows...

• S205 - problem with the keyboard (right shift key)

  Hello.

  Google couldn't really help me, so I try my luck here

  Two days ago, I met a rather strange problem with the keyboard of my S205 (running Win7 64 bit). For some reason any the right shift key is no longer works as a shift key, but it has the same function as "Alt Gr" key on the right side. FYI: German keyboard. For example, the @ is on the same key as the Q here and normally I have press the AltGr key to type a @. Now the same thing with the right shift key.

  I tried a couple of things already, none of them helped. I have accidentally changed the layout of the keyboard, checked once again in the Control Panel, everything is OK here. No Fn - keys are activated. I tried to plug in an external USB keyboard - on that one, the shift key works fine. The right shift key is the only key that does not work properly. I even tried the keyboard on the screen so I could see which key was pressed when I pressed the SHIFT key and she showed the "Alt Gr" - button is pressed.

  I am open to any suggestion. Thank you

  In case someone might have the same problem - unfortunately I don't have a solution. He solved somehow itself a few months later. Really strange thing, but the key is working again.

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• Rotation of the screen with virtual keyboard.

  Hey all, I am porting a no touch to work in touch devices, but the screen rotation throws me some curves that I can't find a good solution for. I have an image for the background of a screen. In the method of paint background vertical field Manager that holds everything, I check the current resolution and to draw the image appropriate for the portrait to landscape mode. This works well, as long as the virtual keyboard is hidden. I bring up the keyboard (of, say, by clicking in a text field) and the background image does not change (i.e. going from portrait to landscape leaves me with a white bar on the right side of the screen), and the fields have the same width and page layouts. Any advice?

  Ah ha! Long story short, Display.getHeight () returns the height of the screen, but if the virtual keyboard is displayed, its height will not appear in the getHeight() value.  This was causing problems with my orientation detection code.

  The strange display behavior was a result of me being too careful.  I put 'default' in all of my instructions switch during the original no touch development, so that when I don't add different resolutions, he displayed a screen that would be small, but grave not down.  I did not detect a known resolution and continued to display the portrait mode, but only while the keyboard was visible.

• Satellite A135 - problems with the keyboard

  Hello

  I've got aSatellite A135 - s4527 with windows XP SP3 on it.
  I was looking for the solution go PowerSaver work normally. I upgraded the BIOS to v 1.6 for a 1.7 last.
  Now I have trouble with the keyboard. It is not enough. Also, I do not know how bios rollback :(

  Can someone help me please?
  Thanks in advance

  Hello Mikachi

  Please do not be angry on me, but your ad is nothing other than chaotic.
  Initially I don't understand what you mean with normally get jobs to save energy? Normally?
  How it works on your laptop?
  For problems with tools or utilities do not update the BIOS.

  Back to the keyboard. What kind of difficulties do you have?
  Give us more information please. What exactly happens?

• HP Pavilion x 2-10-n113dx: spell check with virtual keyboard, but none with physical keyboard

  On a HP Pavilion x 2-10-n113dx with the home edition of Windows 10 (64-bit).

  What software/browser used, when it is attached to the keyboard (in desktop mode), I noticed 1) when you use my virtual keyboard it is a bar of spellchecker (which offers options to spelling/words) at the top of the virtual keyboard, but 2) when you use the physical keyboard, it doesn't seem to be any tool/service spell.

  Is there anyway to get the spell using the physical keyboard? When I tap on the physical keyboard, virtual keyboard and its spellchecker bar is hidden.

  Hey @locacher,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have questions about the Auditors of spelling with the physical keyboard. I'd be happy to help you with that.

  A spell checker does not come standard with the physical keyboard. You can still install a third party. You can search google App 'Spell Checker' or something alone those lines, however, we won't not preinstalled on the laptop to the physical keyboard.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• I have problems with my keyboard change the meaning of the keys.

  I went to "fix" but said he could not fix it. ".  2 errors: problem with ISATAP adapter #9 driver and hardware problems currently my TAB key displays all the runing programs and my shift cap links P in Media Player.  Concerned may by a virus.  Note reciently installed keyboard perferial... works well for the last several days...

  Help, please

  Tina

  Hi Tina,

  Thanks for posting in the Microsoft community.

  I understand that the keyboard does not work on your computer. The Fixit you ran reported errors with ISATAP problem and hardware.

  Try the methods and check out them.

  Method 1:

  Check out the link and follow the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Check out the link and follow the methods in the article.

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520/en-us

  If the problem persists then let us know so that we can provide more steps.

   

• Problem with a keyboard and a numeric keypad "Fn".

  Hello

  I have been using my keyboard to laptop for a while and I have got used to the layout. The laptop keyboard has a numpad integrated (on the letters 'jkluio789') and it works when the locking digital led is on and I hold down the 'Fn' key When I touch "Fn" and keep NumLock enabled, it lets you type regular letters. This function is very useful for me.
  I recently bought a new keyboard USB Genius LuxeMate i200 with a very similar layout, but the effect of the 'Fn' key is quite opposite. When locking digital led is on and 'Fn' key is pressed it type normal instead of numbers letters, if I release "Fn", he types numbers. If NUMLOCK is off, he wrote regular letters, but is not responding when I press the "Fn".
  Surprisingly everything worked normally on Ubuntu 12.04 with Awesome WM (on the same machine, of course).
  I consider it related problem with Windows drivers. I would be very happy if someone could help me. Furthermore, I use Win7 Professional 64-bit.
  Thank you!!!

  Function keys on a laptop are available/used under this computer keyboard driver laptop manufacturers. Win7 itself does not provide for this

• PROBLEM WITH TOUCHSCREEN KEYBOARD AND WRITING - LENOVO SU230 TWIST

  Hello, please request your support that I do not appear on the numbers and the symbols of the touch keyboard, only to show the letters LISTED SQUARE SMALL INSTEAD OF THESE characters, but characters that should, if someone could give me the model to overcome this drawback does not allow me to use my laptop when I use it as a Tablet

  Lenovo Thinkpad model SU230 Twist

  Hi Ricardo,

  It seems to be a problem with do not have updated or updates relevant driver/firmware. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Follow the steps to run the Troubleshooter:

  a. press Windows + W on your keyboard to move to the search option.

  b. type Troubleshooting , click Troubleshooting.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click on Troubleshooting of hardware and devices and follow the prompt to run the troubleshooter.

  Method 2:

  Download the update of firmware of the touchscreen controller on the Lenovo site and check if the problem persists.

  Atmel touch tool updates firmware of controller for Windows 8 (32-bit, 64-bit) - ThinkPad Twist S230u:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035873

  Please reply with the status of the issue so that we can better help you.

• Problems with virtual center/vsphere client

  Hello

  We use Vsphere client 4.0.0 build 208111 with Virtual Center Server version and same build.

  I have 2 problems:

  1. I have a virtual machine with only one disc that is shown on 2 different data stores. If I look through the models and virtual computers, I see only 1 vm. If I look through the data warehouse screen, I see it in the store data-002 and 003-store data. If I go to the settings of the virtual machine on the datastore-002 and check the disk, I see the path in the store of data-003.

  How can I fix?

  2. I turned on a windows 2003 vm. I couldn't close it via customer vpshere because the status of VM Tools showed not running. When I logged in the system, he showed OK and then I could close by the customer.

  Do I always login for virtual machine tools to perform?

  Thank you

  Haim defending

  This virtual machine has a CD / ISO mounted?  What happens if you click edit setting on the virtual machine, that says the file of the disk?

  Also, go to the service console and watching a .vmx file, it should say something like

  scsi0:1.fileName = "servername.vmdk"
  

  Then look at the hard, it should point to something like

   VMFS "servername-flat.vmdk"
  

• Strange problem with the keyboard event listener

  I have a full screen touch app. To close the application, I set an event listener on keyboard for the key "0". I don't want the press user due to some restrictions Alt + F4 key combination. Problems begin when the application loses focus. Here's the code;

  protected function onComplete(event:FlexEvent):void
  {

  this.setFocus ();
  this.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys, true, 0, true);

  }

  private void trapKeys(e:KeyboardEvent):void {}
  
  If (e.keyCode == 96) {}
  This.Close ();
  }
  
  Else if (e.keyCode == 48) {}
  This.Close ();
  }
  
  }

  When the user change the screen to a different with Alt + TAB application, or any other combination of keys flex app loses focus and does not work when he turns back to my app "0". How can I solve this problem?

  Thanks in advance.

  Hi, Ahmed.

  I have absolutely no problem with the solution you are trying to set up - you use mode full-screen interactive mode of keyboard?

  Please consider:

  on full add keyboard listener

  protected function applicationCompleteHandler(event:FlexEvent):void

  {

  this.stage.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  };

  //

  protected function applicationActivateHandler(event:AIREvent):void

  {

  If (this.stage)

  {

  switch the State to display full-screen when activated

  If (this.stage.displayState! = StageDisplayState.FULL_SCREEN_INTERACTIVE)

  {

  this.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;

  };

  };

  };

  //

  private var exitHandled:Boolean = false;

  on NUMBER_0 | NUMPAD_0 exit-close

  protected function trapKeys(event:KeyboardEvent):void

  {

  If ((event.keyCode is Keyboard.NUMBER_0

  || event.keyCode is Keyboard.NUMPAD_0)

  (& this.exitHandled == false)

  {

  exitHandled = true;

  this.stage.removeEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  This.Close ();

  };

  }

  (Note: applicaton of the events 'applicatonComplete' and "applicationActivate" are routed to over managers)

  Kind regards

  Peter

• Problem with virtual pc, open the vhd file

  Earlier, I worked with virtual pc very well on xp.

  later, I deleted some of the .net etc... Associates of the programs of the Control Panel on the local computer
  and I deleted the computer virtual and installed again.
  But now we get an error windows cannot open this file?
  Choose a program from the list etc., opening the vhd image
  can u make clear which program is deleted and what software must be installed

  Please post on the forum PC virtual dedicated listed below.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Thank you

• . Corrupt Windows files, problems with fan keyboard keys,

  I had problems with windows 8 for some time. It does not load properly more and takes time. I ran the sfc scan and received a message he had corrupted files that could not be repaired. I also noticed a ticking sound from my hard drive. I ran a repair for the reader and found no problem. These files would be the source of the noise ticking? Also, I have a problem with my fan. Is a kind of grinding noise when the system is turned on. I cleaned up and it is a fairly new system, so I do not think that it should be replaced. What is a software problem? And is there a way to repair the keys that are unresponsive outside replacement. The guy who cleaned the fan forgot something in the screwdriver system directly or very loose keys does not. I removed, but the keys do not work

  Hello Pierre,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have with the corrupted in the computer and other multiple issues in the computer files. Don't worry, we're here to help when fixing these issues.

  But I would like to know some more information on this issue to help you better.

  1. What troubleshooting utility did you use?
  2. When you get the ticking sound?
  3. Is that when you use an application or program?
  4. You get an error message while, key board is not working properly?
  5. What is the brand and model of the computer?

  In the meantime, please follow the following suggestions to solve the problem.

  Corrupted files may be one of the reasons for the system has as many questions together. So, you can try to manually fix the corrupted computer files and check if that helps. Follow the link below to do the same.

  Use the System File Checker tool to repair missing or corrupted system files

  (See the procedure below: how replace manually a file system damaged by a known good copy of the file)

  http://support.Microsoft.com/kb/929833/en-us

  And for problems with sounds from the hard disk:

  1. Noises may result from problems mounting. This is due to a high frequency in the mounting material vibration, or a drive failure.
  2. Repeated and regular, tap, grind or beep.
  3. Remove the side panel of the cover of your case and do operate the machine with the lid side for 30 to 60 minutes see if the noise subsides. If the noise disappears, your hard drive is probably overheating, causing the noise.

  You try to run the disk check and see if that helps in the setting of these noises and to detect if the hard drive is damaged or not. Follow the steps below to do the same thing:

  Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click on cmd , and then click run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Additional information:

  Optimize Windows performance
  http://Windows.Microsoft.com/is-is/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note : Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.