I have a problem with my keyboard after the update using drivercanner

Similar Questions

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• I have major problems with Photoshop CS6 after the upgrade of Windows 8 to 10 of Windows.

  Just upgraded to Windows 10. I had 0 issues before upgrading my system. When I first opened the program I couldn't use any tool correctly because the jury of art was covered in black and flashing/alternating between black and transparent background. I have close to reopen and try again. Now I can't even open Photoshop at all. I get an error indicating that the program has stopped working. From now on, it seems that it is only of Photoshop with the question and not my other CS programs. How can I fix? He couldn't start comes at the worst time in the middle of a project.

  Hi dropj

  Thanks for the update.

  Here are a few steps you can try

  • Check your system must meet all requirements for Photoshop (especially graphics cards) system requirements | Photoshop
  • In Photoshop, check open Cl must be enabled in preferences > performance > advanced settings. Also check how is the VRAM

   

  • Create a new user account on your computer How to Set Up and configure on Windows 10 user accounts

  Then try to work in Photoshop in there

  • Temporarily disable the use of your card from the Device Manager and try to use Photoshop.

  Concerning

  Assani

• Problem with URL ReadyCloud after the installation of the FW 6.5 on RN312

  Hello

  After the update to the official FW 6.5, the URL of the ReadyCloud is always on "'https://readycloud-test3.netgear.com/client/en/welcome.html ' not on the production URL"

  What is the correct production URL?

  Thank you

  OK, it's a problem browser temporary files after the update, sorry!

  I have clean the temporary files IE11, now all URLS are corrected with links PROD. I have this url: https://readycloud.netgear.com/client/en/welcome.html

• Hello I have a problem since my installation of the update of Yosemite on my Mac, I can't open Indesign CS6

  Hello

  Hello I have a problem since my installation of the update of Yosemite on my Mac, I can't open Indesign CS6.

  I have a problem since my installation of the update of Yosemite on my Mac, I can open more Indesign and yet I installed JavaForOSX2014-001, but it changed nothing someone could help me?

  Please do not post the same question multiple times. If someone can help, they will do it, but be patient - we are all volunteers righteous, users like you. I'll delete your other messages.

• I have a problem with a missing on the computer user account.

  Original title: problem getting back to the original account admin user

  Since the computer was new, I didn't have that one user account and didn't need a user to logon screen, when it opened to that and the only active user account. Fast forward 6 months that I had a problem with a windows installation file deleted and in order to get a program running I had to add a user account for the new installation of the user files. That part worked, but when I disconnected and tried to return to my original owner account there was only the new account on the logon screen my original account wasn't there. My files for this user account are still there in C: User but I can't find a way to get there.

  Googleing this problem I saw things about problems with the accounts being listed as AccueilCompte, or administrator, but it did get me anywhere, the only difference I've seen after going through all that I saw in Win7 Home Premium, which had to do with user accounts, it is that my original account was registered in a field as 'owner '. I don't know if it's part of the problem or not. How can I return to my original account and why isn't she appear on the opening screen of session or user accounts?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I see that you have a problem with a user account.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. have you logged as administrator?

  To resolve this issue, let us try these methods:

  Method 1.

  You can transfer the files from the user account of old or damaged to the new user account by using the article "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2.

  You can also check out this link for more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-transfer-files-from-the-original-user-to/20c78000-f1e2-4060-b02c-6f23fbbf270e

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• Problem with Toshiba computer after Windows Update

  Just after the update from Microsoft has completed the installation of an update, all my desktop icons have gone white and all the links are dead.  I can not even the command prompt to activate so I can go through some of the solutions posed in another forum.  When I try to run any program installed, I get the window 'Open with' and zero recommended programs listed.  When I browse to find the application and add a link to the program, if fails to put in place and the program fails to start or run.

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.

• HP Pavilion x 360: I have a problem with my pc.after I opened indicates that the boot found.please device not install a

  Help, please

  Hello

  Welcome to the HP Support forum!

  I'm sorry for the problems you are experiencing.

  What happens is that the computer attempts to boot from the primary boot device (for example your HDD/SSD) there is nothing or no device start and as a result, the error.

  This can be caused by 3 things:

  -starting from incorrect device OR inaccurate UEFI/BIOS boot settings

  -The Windows operating system question (or not at all)

  -Hardware problem HDD/SSD

  HP has an official article on this issues > > http://support.hp.com/us-en/document/c01443463

  We will first test the hardware configuration of questions.

  Please, turn off your computer. Repeat using the power button and

  as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter HP Start menu similar to the following:

  

  Choose / press F2 and follow the on-screen instructions to make the test system > > > test FAST. More information can be found here

  > > http://support.hp.com/us-en/document/c03467259

  > > http://support.hp.com/us-en/document/c03467259#AbT1

  He must verify these items:

  Battery check
  Verification of the processor
  Audit of the Board of Directors system
  SMART HDD control
  Verification of DST short of hard disk
  Quick check of memory

  Let me know the results of the test.

  You can try to get into the BIOS and make sure that your settings are defined by default those

  Information > http://support.hp.com/us-en/document/c00034791

  > http://support.hp.com/us-en/document/c01443329

  Make sure that you start from the primary HDD/SSD

  Start your computer and immediately continue to press Esc (as tap-tap-tap) - you will enter the HP boot menu. Choose F9 then the HDD/SSD. Press ENTER

  If you try all of the above [if material tests pass, if the BIOS is set to default and if you start from the HARD drive], then it is associated with Windows operating system issue.

  HP Pavilion x 360 usually comes with Windows preinstalled, and there is a recovery on the HARD/SSD partition.

  It can be used to restore your Win OS and software to factory settings by default so that easily and quickly correct you BONE problems caused by faulty drivers, virus/malware/OS corruption/etc.  Here's how it works:

  1 Please, shut down the computer using the power button

  2. turn on.

  2.1 as soon as you press the power button, keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu

  3. tap on F11 for recovery of the system

  4. follow the on-screen instructions.  Here is an example of the video:

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  > > https://youtu.be/PC3sUc3lr3E?t=109

  I would like to know if it works for you. Feel free to post again if you have problems.

• I have problems with my keyboard change the meaning of the keys.

  I went to "fix" but said he could not fix it. ".  2 errors: problem with ISATAP adapter #9 driver and hardware problems currently my TAB key displays all the runing programs and my shift cap links P in Media Player.  Concerned may by a virus.  Note reciently installed keyboard perferial... works well for the last several days...

  Help, please

  Tina

  Hi Tina,

  Thanks for posting in the Microsoft community.

  I understand that the keyboard does not work on your computer. The Fixit you ran reported errors with ISATAP problem and hardware.

  Try the methods and check out them.

  Method 1:

  Check out the link and follow the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Check out the link and follow the methods in the article.

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520/en-us

  If the problem persists then let us know so that we can provide more steps.

   

• I have a problem with my keyboard failed on dell insirion laptop

  Reference op inspiron Dell laptop keys are missed ignition

  If the problem occurred after a windows update, use the system restore for a period prior to this update, and then run windows update > cut settings, recommended to disable the updates.

  If something else, explain what exactly means moving

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Problem with VGA card after Windows Update

  Hi all.

  Today I start to address a problem with me second VGA card (Matrox G200 G2 + / QUADP-PL/7) after a yesterday updated windows.
  I am able to see the other 4 monitors, but with a yellow triangle.
  You thing has remove updates yesterday going to solve my problem?

  PS:If you have an another idea is welcome

  Thank you and best regards.

  Hello

  Please contact Microsoft Community.

  This problem may occur if the VGA card drivers are updated after the installation of Windows updates. I suggest to follow the steps below and check to see if problem persists.

  1. Click Start and stop in the search box, type Device Manager.
  2. On top, on the start menu, click on "Device Manager".
  3. In "Device Manager", double click "Graphics card" expand. "."
  4. Click on "display Matrox G200 G2 + / QUADP-PL/7 ' and click 'properties '.
  5. In properties, click on the "Drivers" tab and check if the option 'Return to the version' is 'active '. If so click on "Roll back" to restore the previous version driver.

  Note: If "Roll back" is greyed out, then see the article restoration of the system;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: try to restore your system to an earlier date when everything worked correctly.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Meet us, then we can help you further.

• Problems with VPN tunnels after the upgrade to PIX 7.0

  It seems that Cisco has revamped the VPN process on the new Version of PIX 7.0.

  After I've upgraded, I noticed that AH (i.e. ah-sha-hmac, ah-md5-hmac) was no longer supported and all my container transformation games OH no were not converted.

  Another question, if you have enabled on Versieon 6.3, names when you upgrade, tunnel groups will be created (formerly "identity isakmp crypto, crypto key isakmp peer ') which will include a hostname (hostname of identity) instead of IP as it was to the point 6.3. Guess what... Nothing works! Having to delete and recreate it using the IP address.

  See an example...

  tunnel-group OTHER_END type ipsec-l2l

  IPSec-attributes tunnel-group OTHER_END

  pre-shared-key *.

  The above does not work... Having to recreate using the IP address mapped to OTHER_END...

  tunnel-group 2.2.2.2 type ipsec-l2l

  2.2.2.2 tunnel-group ipsec-attributes

  pre-shared-key *.

  Furthermore, I have problems with my racoon and freeswan extranet... Did someone recently updated with success and other gateways VPN provider (i.e. checkpoint, Freeswan and Racoon) work?

  We found the solution for this problem. It appeared that the perfect forward secrecy is enabled at the other side. If a 'card crypto outside_map 10 set pfs' is necessary. With the pix 6.3 version that appears not to make the difference, the vpn works even with pfs disabled on the side of pix.

• Problems with iframes cached after the upgrade to Safari 9.1

  I have a problem that Safari is caching my iFrames.

  What follows (pseudo) HTML (well, it's an aspx page) is OK in Safari 9.0:

  < html >

  < body >

  < iframe id = "page1" src = "Page1.aspx" / > "

  < iframe id = "2" src = "Page2.aspx" / > "

  < / body >

  < / html >

  in Safari version 9.1, although

  1. caching is disabled in the developer toolbar

  2. I got Mac + R to reload the page

  It will still not send a call to the page 1 or page 2 but rather pull server to an older version of this page.

  I know that I could add? Rnd = $ () or something similar now, however, this aid only in part, from a post (postback) inside the iframe, once again, will be the cached page.

  Others out there who have found a solution? I also didn't put all the prama no cache etc. to avoid that, no luck.

  I tried this also in El Capitan with the same result it looks like to be connected to the update of Safari 9.1 (10601.5.17.4)

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis