Problem with ZTE MF190 Dongle (USB Stick Modem)

Similar Questions

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• problem with cisco DPC-3010 USB network connection

  Today, I received the new Cisco DPC-3010 of Charter. I plugged everything and together with my router, that everything works, but when I tried to use the USB Modem have windows says that it is an unknown device. I have installed and reinstalled the drivers, powercycled the modem and restarted the computer, but nothing works.

  Hello

  If the problem is specific to the unit then, I suggest you to contact the manufacturer of the device for the best assistance.

  http://www.Cisco.com/Web/consumer/support/index.html

• Portege R100: Problems with CD/DVD Lacie USB 2.0 drive

  Hello everyone, this is my first post here.
  I'll most likely be a regular here I come to buy a R100.

  I am having trouble with an external hard drive that I bought especially for the R100,
  It's a Lacie CD / DVD burner, model number: 300819EK.

  This unit can be powered by AC or by using the two usb ports.
  I use two usb ports.

  The R100 recognizes the Lacie, and in the Device Manager list, the drive is then
  in the list, but he is listed as a drive of Toshiba.
  I'm assuming that this disc of Toshiba external hard drive, you could buy for use
  with the R100.

  The Lacie drive works, but it seems preloaded the R100 CD / DVD
  pilots are contradictory in some way and is made using the player very touched and don't miss.
  He often gets 20% about a facility, then crashes.

  Is there a spare driver I can download that I can replace the toshiba
  drivers with?

  As if by having the Lacie 100% functional means there is obviously a
  How to overcome the problems.

  Hope you girls and guys can shed some light on this for me.
  Thank you.

  Hello, Larry

  You will be very happy if someone will be able to give you some explanations in this regard. I can tell you more: the fact is that this model is created and tested to work with Toshiba compatible external devices. Because of this, Toshiba built in all the necessary drivers in the operating system preinstalled. It should help the installation and also drive fast and quick recognition.

  This does not mean that you MUST use discs from Toshiba. Of course you can use what you want, but the only problem can be when you try to install the OS. Toshiba recovery image contains drivers for Toshiba drives and recovery procedure will work without any problem because the external sides will be immediately recognized.

  I recommend to visit the Lacie support page and check if you can find some driver it. Toshiba has nothing to do with it, if you use a third party product.

  Often, he gets 20% approximately of a plant then crashes sorry but I t did not understand what you mean with it and what you mean with 20%. Second part of your ad is very confusing and I really don t know what you mean.

  Good bye

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• problem with the speed of usb 3.0

  IM using pavilion tx windows g6 2016 8.1 pro,.

  When I'm using windows 7 I used to get about 38 Mbps speed, but after installing windows 8.1 it usually exceeding 32MBps...

  but once I had 70 Mbit/s for a video avi file... only for this video...

  Here is the screenshot of my usb drivers...

  can someone help me...

  Hi burnin. It certainly could use some driver optimizations Windows USB 3.0, but ultimately transfer speed depends on speed of read/write, flow rates, cable quality and sizes files of your operating system hard drive and USB 3.0 device.

  I found this article on Tom's hardware, showing many landmarks with USB 2.0 and 3.0 hard drive just so that you can see the differences that may occur.
  USB 3.0 base 2.5 "hard drives of Adata, Hitachi and WD:
  http://www.TomsHardware.com/reviews/USB-3.0-external-2.5-hard-disk, 3218 - 8.html

  All that being said, you can try to re - install your chipset Windows 8.1 drivers.
  Intel Management Engine Interface (MEI) driver:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&DLC=en&LC=en&OS=4158&product=5239406&sw_lang=
  It doesn't seem to be an update of the BIOS of your computer.

  While this document is not specific to your problem, some details may help you to find other things to try. Please be aware when you visit all the links outside of HP that some sites have try announcement you cheat by clicking on their links. I found the information on this site is an object of value read however.
  Solve problems of speed USB error "this device can perform faster":
  http://www.MakeUseOf.com/tag/USB-speederror/

• Problem with a mythical eMac (USB 2.0)

  Hi all

  I retrieve an old eMac (USB 2.0) and I changed the HARD drive with a 100% compatible ULTRA ATA/100 with even specific 40 GB Original.

  In fact, the system is without BONES, and I tried to install the latest compatible version (Mac OSX 10.5) in 2 ways:

  (1) the original OEM DVD with my old iMac 2008

  (2) the USB of the commercial version full version

  In the first case, the eMac to load setup but cannot install it, and I can just get into desktop utilities to partition and format the hard drive

  In the second case, the eMac NOT load anything and says cannot install and restart itself.

  Can someone help me understand how to restore the operating system on this splendid Mac?

  Thank you

  Hello

  1. 200 iMac version will not work, it is Intel only, you need universal Retail DVD.

  2. are you the startup by holding down the alt key? What is show the USB as a boot option?

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• Problem with connecting to the usb storage to the EA4500 via ftp from the internet

  I have trouble to configure my EA 4500 as an FTP server.

  I followed all the instructions according to the manual, but cannot access the USB I connected tot the EA4500 of the internet.

  When I try to connect my own network, everything works fine.

  The configuration I have at home is as follows:

  Cable modem ISP--> EA4500--> all computers.

  As said, I use the EA 4500 as an FTP server.

  If I install an FTP server on one of the computers on my home network and transfer the correct port on the EA4500 for this PC everything works fine and I have access to the internet. Unfortunately, it won't work when using the USB plugged into the EA4500...

  Any help would be great!

  TIA!

  When you go to the EA4500 configuration page, have you enabled the FTP server function?

  When I set mine up, I have was go the section when you set up the USB (shares, etc.) and turned on FTP.

  In the security of the router Security tab, I uncheck the 'Block anonymous Internet requests.

  I do know for sure that you have to uncheck this box, but I always turned off this box, just out of habit when setting up a llinksys router.

  In any case, this is what I did and it worked fine.

  The only other thing I can think is... Your modem is perhaps a nat router. And you have the EA4500 operating on a different subnet. And your modem may possibly be block it.

  What is the brand and model of your modem.

• HP require a new 32 G USB stick "" not labeled as compatible with Win 8."

  OS Win Pro 8.1

  Product: HP500-125

  Question: HP Recovery set using the USB.

  Problem: HP require a new USB stick 32 G ""not labeled as compatible with Win 8. "I don't have to buy such a stick in my place (Brisbane, Australia).

  Can you help me?

  CherylG.

  I have for the usb drive that you suggested, and it happened today however it does not resolve the difficulty, even if the product is satisfactory. Consults with the HP support has finally confirmed that the provided HP recovery media software does not work with Win 8.1Pro with media library.

  So, in a way, the problem is solved by default... I used successfully in place of Windows Recovery Media Creator.

• ZTE mf190 device not connected on windows 7 sp1

  I have the zte mf190 dongle which is not detected in my computer with windows 7 service pack 1. After installation it says "ZTE WCDMA Technologies MSM driver not found" and in the Device Manager, it is displayed in 'other devices '. I used the dongle in Windows xp 'Virtual Machine' in my pc even, and there it is installed without any problem and also works quite well. What could be the problem with windows 7 here. Help, please.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• Problem with directinput in dxdiag and the launch of the games

  I recently started having problems with launch of some games.  Two games, at present, are 'Black hawk down' and 'Dead space '.  When I run Dxdiag I get a direct entry access error.  If I click on 'no' in the pop-up window that dxdiag errors access to direct entry, my dxdiag crashes with report error to microsoft.  I think the two are connected.  I have reinstalled/updated all the drivers of sound, graphics and system nothing helps.  When I try to do the webinstall of directx, I get the message that it has not updated.  All devices works fine.

  Any help would be appreciated and thanks in advance for any help offered.

  Lee

  Home Win XP - SP3 - completely up to date, Phenom II x 4 3.1 GHz, 4 GB ram, radeon hd5670 1 GB, onboard sound.

  Managed to find out what was causing the problem.  I have a USB stick electric meter reader.  It blocks somehow the directinput do some games unplayable and the origin of the problem of dxdiag.  If anyone has a similar problem then I suggest to each of your devices USB, one at a time, unplug and see if the problem goes away. If you think that my answers are useful please vote and mark as a possible answer. Thank you.