problem with cisco DPC-3010 USB network connection

Similar Questions

• Problem with Cisco ACS and different areas

  Hello

  We are conducting currently a problem with Cisco ACS that we put in place, and I'll try to describe:

  We have ACS related directory AD areas, where we have 2 domains and appropriate group mappings.

  Then we have our Cisco switches with the following configuration,

  AAA new-model

  AAA-authentication failure message ^ CCCC

  Failled to authenticate!

  Please IT networks Contact Group for more information.

  ^ C

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization network default group Ganymede + local

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  !

  AAA - the id of the joint session

  But the problem is that with the users in a domain, we can authenticate, but not the other. Basically, the question is that when we check on the past of authentication, two authentications are passage and the display of 'Authentic OK', but on the side of the switch, there is a power failure.

  There may be something wrong with the ACS?

  Thank you

  Jorge

  Try increasing the timeout on IOS device using radius-server timeout 10.

  Do we not have journaling enabled on the ACS server remotely?

  -Philou

• I have problem with wifi iphone 6 s not connected...

  I have problem with iphone 6s more wifi not connected...

  I'm having the same problem and tried all the fixes I found online and nothing has worked so far.

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Problems with Cisco 881, internet connection

  I have a newly addedCisco 881 connected to a firewall, which is connected to the ADSL. We have added to the wireless and when wireless clients connect to the network (using standalone APs) they are capable of anything on the 192.168.88.0 network ping. They can also ping the firewall 10.0.88.1, but only because it is on the same network as port fa4. It seems to me like there is a problem with my default routes, but they look good, and I have tried different methods to do this. Here's the running-config on my 881, please help!

  Wireless_881 #show run
  Building configuration...

  Current configuration: 3679 bytes
  !
  ! Last modification of the configuration at 15:45:48 UTC Friday, July 27, 2012
  version 15.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname Wireless_881
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  Select the secret 4 Ng0lbQgI3BKsMMXv78pz6UP80gaDVrhUBQB3XKZMl3M
  !
  No aaa new-model
  iomem 10 memory size
  !
  Crypto pki trustpoint TP-self-signed-1620898290
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1620898290
  revocation checking no
  rsakeypair TP-self-signed-1620898290
  !
  !
  TP-self-signed-1620898290 crypto pki certificate chain
  certificate self-signed 01
  3082025A 308201 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31363230 38393832 6174652D 3930301E 170 3132 30373132 31353431
  30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36323038 65642D
  39383239 3030819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100ED42 50BD2E07 D6A61E1C 7A8C236F 5499F47D 0FF2F1AC 23657162 66769F02
  92921298 C4E68A84 B90B572D 300 C 6653 ADAB41F2 005F1544 122C99DF 16AA1F01
  D3DC117D B92750F5 F6C2D4CE D6D173C5 A197E9C2 7B5EEF9B 4B2404BD D8243ABB
  14EFF08B 21DE9D0A B11610EB 624E3B22 17BA1C73 60212253 DE86D7B8 EFD5771E
  18B 90203 010001 HAS 3 8181307F 300F0603 551D 1301 01FF0405 30030101 FF302C06
  03551D 73735F38 38312E70 616C6D65 74746F63 11 04253023 82215769 72656 C 65
  6974697A 656E732E 6F726730 1 230418 30168014 BDFA0DBF FE8B72A7 1F060355
  9B2D214C 466C1EDF 33D2FA3F 301D 0603 551D0E04 160414BD FA0DBFFE 8B72A79B
  2D214C46 6C1EDF33 D2FA3F30 0D06092A 864886F7 010104 05000381 8100E0EF 0D
  6D122A92 75ABE448 620EEDAD 131569 D 2 05BEB6D9 FA77DF2F 87FD464F 8111454F
  CAE20CC2 580C8DC8 421065CD 31CF2F79 00722044 4B99E26A 5C48FD2D 2DCE835B
  D0ADBD53 B768064B 9E4AB048 F0E9F751 11C9DA51 8EA9C1D3 DCEB136A EE3944D7
  FD7EF038 DE965699 DAC4186F 3AAEBD85 B95F05D1 B3AF0BD5 566498 3 6424
  quit smoking
  !
  !
  !
  DHCP excluded-address IP 192.168.88.1 192.168.88.10
  !
  PCFCU dhcp IP pool
  network 192.168.88.0 255.255.255.0
  router by default - 192.168.88.1
  Server DNS 208.67.222.222
  !
  !
  !
  no ip domain search
  IP domain name *.
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FTX161080BP
  !
  !
  username privilege 15 secret 5 mgaskin $1$ y8... $cCDIZqgRtHqBbsh36XW9d.
  username privilege 15 secret 5 jlivingston $1$ Qs6L$ mhAtoKguqLmzmlfGbMYqW.
  !
  !
  !
  !
  !
  property intellectual ssh authentication-5 retries
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet1
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet2
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet3
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet4
  IP 10.0.88.2 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  !
  interface Vlan1
  no ip address
  !
  interface Vlan880
  IP 192.168.88.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  !
  default IP gateway - 10.0.88.2
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source list 10 interface FastEthernet4 overload
  network default IP 0.0.0.0
  IP route 0.0.0.0 0.0.0.0 10.0.88.1
  !
  access-list 10 permit 192.168.88.0 0.0.0.255
  not run cdp
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  password 7 144F425C5D14292D273D6B657A46
  opening of session
  transport telnet entry
  !
  max-task-time 5000 Planner
  !
  end

  and if you disconnect the router announcement use pc directly to the firewall with ip 10.0.88.2 work?

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Problems with Isatap adapter and Wirelesss network.

  The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Microsoft-ISATAP-adapter-4-not-working/ef9c6ad9-623e-416F-8D9F-8e3d83d998ca?page=2#LastReply

  Please start your own Thread in these Forums.

  You are replying to a Thread 2009; It comes to 2014.

  ________________________________________

  Read this, you can:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520/en-us

  Windows cannot load driver (Code 31), etc.

  RESOLUTION

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ____________________________________________

  You do not tell us the error your when you try to connect to the wireless network.

  We don't know if it's drivers or you have put in place correctly.

  Use the computer that you use to get here for access to the Sony site > downloads Section > key in your model number and operating system > find NETWORK card drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > finding drivers > download and save their > copy to a flash drive and transfer and install them.

  See you soon.

• Problems with the windows/debian home network after router switch

  Hi all:

  I'm new on all the forums, but desperately need help. Even though I am not new on windows and have been building my own computers for years, I am pretty new to networking and also for Linux.

  I have a home network with 3 computers with windows 7 installed and my server with Debian Squeeze. Somehow I've muddled through the installation of debian and even on my network using samba (after days of research). Everything has been great to work with all 3 computers and my server talking to each other.

  I got internet connection across the home network, and all the computers + Server appeared and was accessible on the LAN. It was with a little D - link DIR-601, last week I lost all the internet connect to Comcast, which turned out be their problem but Comcast informed me that my router was not the best and he was originally put my speed problems.

  So I bought a new router Linksys WRT54GL and installed yesterday and it's where I need help... I have internet connection and you can surf the web on all computers 3 windows and the debian server, all computers 3 windows appear and are accessible on the LAN, but not the debian server.

  As soon as I reinstall the D-link router, everything is back to normal. I tried with my limited knowledge of Linux to change network configuration files in my debian server but so far no change. I'm not sure this is a linux problem or a problem with linksys... If anyone has any ideas on how to solve this problem, I could use you help... Thank you ALL!.

  Thanks for your suggestions, but it turns out that the problem was a Linux problem, after changing routers, I had to make some changes in debian Linux as share. I'm on duty again.

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Errors in Windows 7 with Windows Help and Support, network connection, and the system restore

  I have a HP Pavilion dv6 (4 years), sometimes overheated with heavy use. Normally I can cool, restart and wear. However, my laptop just overheated and closes, and this time I encounter all sorts of problems.
  First of all, after the reboot, I noticed that the system does not automatically connected to my Wi - Fi (it does not even recognize the available network).
  Secondly, in attempting to fix the network problem, I clicked on the link "Troubleshooting", only to receive the following error message "an unexpected error has occurred. ID of Package cannot continue the Troubleshooting Wizard": unknown path: C:\Windows\diagnostics\system\networking error Code: 0x8007045A

  Third, because troubleshooting did not work, I thought I'd try the help and Support Windows to search for answers. However, when I opened it, I received the following message: "Windows Help and support has encountered a problem. You might be able to solve the problem by restarting Windows Help and Support. If the problem persists, proceed as follows: 1. search the online help on the Windows website.  2. contact your manufacturer of computers or Microsoft Support for assistance. There could be a problem with one or more Windows system files or folders on your computer. "Because I could not connect to the internet, these suggestions and links were useless.

  Fourthly, as I failed to locate the problem, I tried a system restore. However, after he appeared to run (took about 30 min) and restarted Windows, the following message appeared: "system restore was not entirely successful. The system files and settings on your computer did not change. Details: System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore. An unspecified error occurred during system restore. (0x80070005)
  You can try the system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery? "I have disable my antivirus (AVG), tried and received the same error message.

  Short physically all my backup files and restore to factory settings, I think I've exhausted what I can do.

  * EDIT * after scouring the site, I found a suggestion to run the tool via the command prompt System File Checker (see thread here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/no-internet-connection-on-this-computer-after/83fb22c9-712e-467d-9a68-f8d52dde9bcb), which I did and found some corrupted files. The following response appears: "Windows Resource Protection found corrupt files and repaired successfully details can be found in the CBS.log newspaper... File system changes will take effect after the next reboot. "After restarting, the internet connection problem seems to have been resolved. Service work. and Windows Help and Support also works! I hope it helps someone else!

  Hi Lorenacadi,

  Thanks for sharing of the resolution. Your efforts and patience are highly appreciated.

  In addition to the emission of heat:

  Two things inside the laptop generate heat - power (in the place where the power cord plugged in) and the processor.  The CPU has a heater and a fan to help disperse the heat and keep the CPU at a reasonable temperature.  Hot air is sent on the vents, and air at room temperature between in other events.
  What happens generally is dust forms near the vents, near the Airways within the laptop computer which lead to the mouths and on the CPU fan itself.  All these sources of dust cause airflow slow down, so that the hot air lingers and gets even hotter.  To resolve this problem, you will need to take the laptop apart and 'very good' to clean the dust and the CPU fan.

  Another potential source of heat which would be composed of dust problem might be software related.  More 'work' the CPU must do the most energy is needed and therefore more heat is released.

  Keep us in case you have questions/suggestions more associated with Windows.

• problem witththe driver for the wireless network connection card

  Quite suddenly my laptop (Toshiba) could not connect to my Modem and printer. I can only connect to the internet with a cable connection to the modem. The printer reports no problem with the connection. Troubleshooting report 'Problem with the driver for the wireless network connection card.' Problems also with ISATAP MS Driver adapter and Teredo Tunneling adapter. Software could not solve the problem.  A technician online know-how also faled to solve the problem after an hour trying everything - uninstalling and reinstalling, etc. He thought it would be a virus even though I have several active antivirus programs. Any ideas? Should I chuck the laptop away and buy a new one?

  If, as you say, you have several active antivirus running programs, they will conflict with each other and you will have no protection

  Visit the support of Tosh, specific to your model, and reinstall the drivers for the chipset and wireless

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Windows Server 2008 R2 with various OS Win interrupted network connections

  Not a question, but a finding:

  Shortly after the upgrade to Kaspersky Endpoint Protection 8, I started to have problems with seemingly random work stations in my area, the loss of their connection to one or the other of my boxes of Windows Server 2008 R2.  Some of the workstations XP SP3, some Win 7 - two BONES have been affected.  The breakdown of connectivity went both ways - the server could not see the workstation and vice versa.  Sometimes if I waited about an hour, the workstation could re-establish his connection spontaneously, but usually I have to change the IP address of the workstation.  Doing so systematically restored the connection.  Release and renew for workstations using DHCP didn't work because they always had the same new IP - address should change to restore the connection.  After a process of exhaustive and exhausting trial and error to determine the cause of this problem (I initially make the connection between the upgrade of Endpoint Protection and this question), I finally determined that the network attack blocker component was causing this problem.  I disabled this component during my assignment and did not have connectivity losses in the three months that I got that off item.  I also had a case when after the reactivation of network attack blocker, I got a workstation loses its connection to one of the servers, and after disabling the network trainer attack once again, work stations that had lost its connection almost immediately restored the connection itself.  So, if you are having this problem and use Kaspersky Endpoint Protection 8, disable the network attack blocker component.

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated.

  You can also publish your solution or results in Windows Server 2008 R2 TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• Question about the use of with Satellite A200-10W USB network card

  Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.

  Hello

  Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

  If you have any other questions, then just ask.

  See you soon