Problems adding 4 ESXi and ESXi 3.5 to VCenter4

Similar Questions

• Problem adding free ESXi host of AD domain

  I have previously create the computer object in active directory. I then connect 5.5 ESXi free edition host by using the .net client, from there I can join my domain host name successfully.

  

  But try to do the same to PowerCLI when you are connected to the host as root, you receive an error

  Get-VMHost | Get-VMHostAuthentication | Set-VMHostAuthentication -Domain "domain.com" -Credential (Get-Credential) -JoinDomain
  

  Game-VMHostAuthentication: 24/03/2014-16:16:15 Set-VMHostAuthentication

  The current permit or ESXi version prohibited the execution of the requested operation.

  On line: 1 char: 41

  + get-vmhost | Get-VMHostAuthentication | Game-VMHostAuthentication-domain

  " ...

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~

  + CategoryInfo: NotSpecified: (:)) [game-VMHostAuthentication], Re)

  strictedVersion

  + FullyQualifiedErrorId: ViCore_SystemManagementServiceImpl_JoinDomain_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.Host.SetVMHostAuthentication

  ---------------------------------------------------------------

  I see the error indicates "current license or ESXi version prohibited the execution of the operation requested." but it works since the .net client and I have not read anything indicating that you cannot add to esxi hosts free domain. I also used JoinDomain_task method and you still receive the same error

  $ADCreds = Get-Credential
  $Domain = "Domain.com"
  $AuthObj = Get-View -Id 'HostActiveDirectoryAuthentication-ha-ad-auth'
  $AuthObj.JoinDomain_Task($Domain, $ADCreds.GetNetworkCredential().username, $ADCreds.GetNetworkCredential().password)
  

  We the ESXi free license limits is the fact that there not a 'API write. "

  This means no changes through CLI, PowerCLI and other tools that use the API.

• Having problem adding to drag-and - drop operation to move the furniture on a floor plan

  I have the following code. I need to create floor plans where users can drag and drop the furniture on the floor plan.  I have three elements that work but when I convert all of the additional items to a symbol and select movie clip and then add several lines to the code, none work... How the code can determine that my clip I named 'couch' goes to clip 4.  Thanks if you can help, Frankie Foster

  Here is my code:

  var numObjects:uint = 3 / / assign the total number of movieclips that will be dragged

  for (var i: uint = 1; i < = numObjects; i ++) {}

  This ["movieClip_" + String (i)] .addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  This ["movieClip_" + String (i)] .addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);

  }

  var selectedMC:MovieClip;

  movieClip_1.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_2.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_3.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
  movieClip_1.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);
  movieClip_2.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);
  movieClip_3.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);

  
  

  function clickToDrag(event:MouseEvent):void
  {
  selectedMC = MovieClip (event.currentTarget);
  selectedMC.startDrag ();
  }

  function releaseToDrop(event:MouseEvent):void
  {
  event.currentTarget.stopDrag ();
  }

  stage.addEventListener (KeyboardEvent.KEY_DOWN, nextQuestion);

  function nextQuestion(event:KeyboardEvent):void {}
  trace (Event.keycode);
  if(Event.keycode == Keyboard.Right)
  {
  selectedMC.rotation += 5;
  }
  
  if(Event.keycode == Keyboard.Left)
  {
  selectedMC.rotation-= 5;
  }
  }

  It is not a conflict, but it's a waste of code because they are both the same thing.  The first with the right loop is more effective in terms of coding and will make life easier for you because you only need to adjust the numObjects value to have it include more.

  You just need to assign instance names for the rest of your objects in the same way... movieClip_ # code as you (with loop version) should be enough.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with my ESXI

  I have problem with my Esxi 5.0.when, I installed whenever I got a message.like like NO ADAPTER NETWORK NOT FOUND error in my ESXi software.

  How reslove it .or how to upgrade the lan installation software. Please give the correct soluction.

  A tried

  I activated the lan in the bios

  It could also be that your NETWORK adapter driver is included in the ISO file.

  If you NIC are supported (on the HCL) then you can simply load the appropriate driver or create an ISO custom (with the help of the image generator) with the correct driver added.

  Here are some links that you can check:

  Image generator:

  http://www.YouTube.com/watch?v=AfjEyB2FTwc

  http://virtualbill.WordPress.com/2011/08/19/VMware-vSphere-5using-Image-Builder-for-custom-installation/

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.vSphere.install.doc_50/GUID-C84C5113-3111-4A27-9096-D61EED29EF45.html

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2005205

  Custom ISO

  http://www.ivobeerens.nl/2011/12/13/VMware-ESXi-5-whitebox-NIC-support/

  Drivers:

  http://downloads.VMware.com/d/info/datacenter_cloud_infrastructure/vmware_vsphere_hypervisor_esxi/5_0#drivers_tools

  BR

  A. Mikkelsen

• I have problems to install ESXi 3.5 in a Gigabyte G31M-ES2C Board

  I have problems to install ESXi 3.5 in a Gigabyte motherboard, fails the installation process, the console says fatal error, the entire message is:

  Model G31M-ES2C

  Serial number abandoned

  BIOS Rev: CF

  Help me, please

  ESXi is very demanding and specific with regard to the material. There is a very short list and I do not think that your software is on the supported list. You may be able to get hardware not supported for installation, but you must work there. I would look on the site http://vm-help.com for possible solutions for your hardware not supported.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  Hey paulc6148125,

  Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.

  Kind regards

  Nicos

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Problem adding video to Captivate slide

  Hello

  I'm having a problem adding a video file FLV to Captivate. Basically, after that I have published on a SWF file, the video does not appear on the slide at all. It's just empty.

  After searching for a bit, I found that the file FLV MUST include * metadata *.

  However, I added medatada with VLC Media Player, and it still shows the same behavior. There's a certain * amount * metadata? Is there a * type * of metadata without which the video not displayed?

  Adobe help thread talking about what we call the ' Kit Flash video '-which is a stand-alone product or one extension of another product? Is it free? Are there any other free alternatives?

  I'm just very confused.

  Thank you!

  I ended up answering my own question. But just in case this helps someone else, I'll post my solution.

  Essentially, I just re-created the video in MP4 format. Then I used MetaZ (for Mac) to write metadata in the video. Finally, I imported the video as an object and when I posted the video, Captivate it transmutes to the FLV format needed.

  The video is now displayed correctly.

• Problem adding a folder of images

  Hi, I have been a user of Lightroom 5 for a while now and everything was absolutely perfect, but I now have a problem adding a folder to put the images in LR.  I checked using "Finder" that the images are still there on my external hard drive, which fortunately they are, but when I navigate to that folder in the section "Add files" it shows no images at all, and the 'Import' button is grayed.  There is a new catalog, I created for 2015 customers otherwise the only other change is that I have been preselected a few images using photomechanical moved selected files into a new folder created by me.  Otherwise I have not changed anything else from my usual game to the top.  As a validation test, I tried adding several different sets of RAWS in different folders (which I have previously worked on in other catalogs so I know they were fine before), but I'm having the same problem.  Please can anyone help shed light on what clearly is a bit a killer of productivity right now!  Thank you very much

  DJ - it's a Canon 5 d Mk III, using Lightroom 5.7, and the images are all of the FIRST.  All images have been imported from the map in a folder on my external hard drive, before I used photomechanical to them for review.

  I am pleased to say that the problem is now solved.  I found another thread in forum with many people have exactly the same problem and with various corrections that have worked for them but not for me.  Then I found one that worked for many people - just expand the Destination panel and hey presto - all images appeared.  How weird randomly - I do not know how it was fixed, but there, so now I'm still productive.

  Thanks again to you and Joe for all your interest and your willingness to help - its much appreciated!  I'm now going to edit some pictures

  Nadine

• Problems with configuration properties and the java plugin

  Hello
  
  I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
  ' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
  Wait I use properties by default, then I don't get any errors.
  
  What is the problem?
  
  MyAutoDiscoveryServerDetector.java
  ---------------------------------------------------------------------------------------------------------------------------
  SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements
  
  {AutoServerDetector}
  
  public list getServerResources (ConfigResponse platformConfig)
  
  get {PluginException}
  
  Server list = new ArrayList();
  
  Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));
  
  ConfigResponse productConfig = new ConfigResponse();
  
  productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
  productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
  productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
  productConfig.setValue ("myValue", 10);
  
  server.setProductConfig (productConfig);
  
  Servers.Add (Server);
  
  return of the servers;
  
  }
  ---------------------------------------------------------------------------------------------------------------------------
  
  HQ - plugin.xml
  ---------------------------------------------------------------------------------------------------------------------------
  <? XML version = "1.0"? >
  < package = "com.citytechinc.articles.hyperic.plugin plugin" >
  
  < name of the filter = "domain" value = "My Auto Discovery" / >
  
  < name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >
  
  < plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
  < plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >
  
  < config >
  
  < name of option = 'myUrl '.
  
  Description = "Enter the URL for this resource"
  
  " default = ' http://127.0.0.1 "/>
  
  < name of option = "Description".
  
  Description = "enter a description of this plugin"
  
  default = "default my Auto Discovery Description" / >
  
  < name of option = "myTimeout."
  
  Description = "time-out for something in my plug-in.
  
  default = "0" / >
  
  < name of option = "myValue"
  
  Description = "a metric value.
  
  default = "10" / >
  
  
  < / config >
  
  
  < name metric = "availability".
  alias = 'availability '.
  Template = "System.avail:type = Platform:Availability"
  category = "AVAILABILITY".
  indicator = 'true '.
  collectionType = "dynamic".
  units = "percentage" / >
  
  < name metric = 'value '.
  alias = 'value '.
  model = "" MyPlugin:Type = value: value ' "
  category = 'USE '.
  indicator = 'true '.
  collectionType = "dynamic".
  units = "none" / >
  
  < / Server >
  
  < / plugin >
  ---------------------------------------------------------------------------------------------------------------------------

  UM,.

  This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.

  First of all, always check the server log, errors that appear it should lead to the cause.

  The plugin xml initialized ok on the server, or any error appear?

  You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
  If this isn't the case, errors occurred when starting the server, check the log.

  Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?

  Generally the pitfalls that come from these errors.

  Been there, done that.

• Problem with FMIS 4 and streaming of live events

  We have a problem on our platform and its makes us crazy... No seriously... NUTS.

  We have triple checked every possible component of a hardware level to a level of the software configuration.

  The problem: our platform consists of 2 servers of origin with 6 edges to speak for them (really strong material).  Once we inject a live stream into our two origins... we can properly get out the stream via the edges and listen to successfully through our player.  Once we hit about 2200 simultaneous connections, FMIS Server removes all connections busy with water courses.   Newspapers, the only thing we see is the following - tons of disconnections with the status code of 103 which, according to the online documentation, means Client is disconnected because of the server (or application unloaded).

  We have simulated the scenario with the Simulator FMS load utility... and we are starting to see errors + connections dropped around 2200 brand.
  

  The machines are Dell blades with dual processor Xeon (quad-core) with about 50 gigabytes of ram per server... The edges are all on 10 Gbps ethernet interfaces as well.

  We managed to generate a nice big fat coredump on the origin and the only thing visible from inspecting the core dumps + newspapers is the following:

  2011-10-05

  15:44:10

  22353 (e) 2641112

  JavaScript execution is out of memory; Server close instance (adapter):

  virtual server, _defaultRoot_: _defaultVHost_, App: livestreamcast_origin/_definst_). Check the size of the JavaScript runtime for this application

  in the configuration file.

  And in the core dump:

  WARNING: no loadable section in no added symbol-file provided by the OSR system at 0x7fff9ddfc000

  Core was generated by ' / opt/adobe/fms/fmscore - adapter _defaultRoot_ - vhost _defaultVHost_ - app - inst '.

  Error of Segmentation of the signal 11, last update program .

  #0 0x00002aaaab19ab22 (/opt/adobe/fms/modules/scriptengines/libasc.so js_MarkGCThing)

  (gdb) bt

  #0 0x00002aaaab19ab22 (/opt/adobe/fms/modules/scriptengines/libasc.so js_MarkGCThing)

  #1 0x00002aaaab196b63 in? (from /opt/adobe/fms/modules/scriptengines/libasc.so)

  #2 0x00002aaaab1b316f (/opt/adobe/fms/modules/scriptengines/libasc.so js_Mark)

  #3 0x00002aaaab19a673 in? (from /opt/adobe/fms/modules/scriptengines/libasc.so)

  #4 0x00002aaaab19a6f7 in? (from /opt/adobe/fms/modules/scriptengines/libasc.so)

  #5 0x00002aaaab19ab3d (/opt/adobe/fms/modules/scriptengines/libasc.so js_MarkGCThing)

  #6 0x00002aaaab19abbe in? (from /opt/adobe/fms/modules/scriptengines/libasc.so)

  #7 0x00002aaaab185bbe (/opt/adobe/fms/modules/scriptengines/libasc.so JS_DHashTableEnumerate)

  #8 0x00002aaaab19b39d () /opt/adobe/fms/modules/scriptengines/libasc.so js_GC

  #9 0x00002aaaab17e6d7 () /opt/adobe/fms/modules/scriptengines/libasc.so js_DestroyContext

  #10 0x00002aaaab176bf4 () /opt/adobe/fms/modules/scriptengines/libasc.so JS_DestroyContext

  #11 0x00002aaaab14f5e3 in? (from /opt/adobe/fms/modules/scriptengines/libasc.so)

  #12 0x00002aaaab14fabd (JScriptVMImpl /opt/adobe/fms/modules/scriptengines/libasc.so::resetContext())

  #13 0x00002aaaab1527b4 in JScriptVMImpl::postProcessCbk (unsigned int, bool, int))

  of /opt/adobe/fms/modules/scriptengines/libasc.so

  #14 0x00002aaaab1035c7 in boost::detail:function:void_function_obj_invoker3 < boost::_bi:bind_t < void, boost::_mfi:mf3 < void, IJScriptVM, unsigned int, int, bool, > boost::_bi:list4 < boost::_bi: value < IJScriptVM * >, boost::arg < 1 > boost::arg < 2 > boost::arg < 3 > > >, Sub, unsigned int, bool, int > : Invoke (boost::detail:function:function_buffer &, unsigned int, bool, int))

  of /opt/adobe/fms/modules/scriptengines/libasc.so

  #15 0x00002aaaab0fddf6 in boost::function3 < sub, unsigned int, bool, int >: operator () (unsigned int, bool, int) const)

  of /opt/adobe/fms/modules/scriptengines/libasc.so

  #16 0x00002aaaab0fbd9d () /opt/adobe/fms/modules/scriptengines/libasc.so::script::AscRequestQ::run() fms

  #17 0x00002aaaab0fd0eb in boost::detail:function:function_obj_invoker0 < boost::_bi:bind_t < boost::_bi:list1 < boost::_bi: value < fms::script:IntrusivePtr < fms::script:AscRequestQ > > > > boost::_mfi:mf0 < fms::script:AscRequestQ > bool, bool, bool >: Invoke (boost::detail:function:function_buffer &) (/opt/adobe/fms/modules/scriptengines/libasc.so)

  (#18 0x00000000009c7327 in boost::function0 < bool >: () const Operator())

  #19 0x00000000009c7529 fms::script::QueueRequest::run())

  #20 0x00000000008b868a in TCThreadPool::launchThreadRun(void*))

  #21 0x00000000008b8bd6 TCThreadPool::__ThreadStaticPoolEntry(void*))

  #22 0x00000000008ba496 launchThreadRun(void*))

  #23 0x00000000008bb44f __TCThreadEntry(void*))

  #24 0x000000390ca0673d /lib64/libpthread.so.0 start_thread)

  #25 0x000000390bed44bd in clone () from /lib64/libc.so.6

  From what it seems that above, FMS is hard crashing when you try to use Clone (2) (it basically means when his tent spawn a new/another process).

  I really hope there is someone out there who can guide us in the right direction regarding how we can identify why our platform cannot cope with a pathetic 2200 connections before the demon FMIS drops all water courses.

  There must be someone out there who is facing this or a similar problem to this...  Help!

  All comments / ideas would be greatly appreciated.
  

  Have you tried growing Javascript Runtime memory? What is the current ScriptEngine/RunTimeSize setting in Application.xml?

  Refer to this link: http://kb2.adobe.com/cps/529/cpsid_52978.html (JSEngine is now replaced by ScriptEngine tag)