Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

Similar Questions

• UCS C220 M3 custom problem after installing ESXi 5.1.0 Cisco

  Hello world

  I m using a Cisco UCS C220 M3 when I tried to install ESXi 5.1.0 custom Cisco after complete the entire process and restart the server. The ESXi has not started it appeared as if there is no operating system.

  In addition, before installing ESXi I configured a HDD in RAID 0, initialized the RAMDisk and chosen as a pilot.

  Hoping someone could help me.

  Llianovich,

  Unfortunately, the on-board controller is not supported with ESXi.  I saw other people using this controller for VMware and makes the work but the behavior is very random and it could work or fail at any time. It is recommended to use one of the controllers of basic PCI or Mezzanine by the ESXi (see c220 m3 datasheet below)

  STEP4SELECT CONFIGURATION of RAID (page 21)

  http://www.Cisco.com/en/us/prod/collateral/ps10265/ps10493/C220M3_SFF_SpecSheet.PDF

  Embedded MegaRAID controller

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C220/install/RAID.html#wp1028426

  

• Big problem with voice XT1068

  Hello! Sorry for my English not good!

  In my XT1068, I have a big problem with the voice: I set up the volume to hear (after call to answer etc.) other different Max-> always I hear MAX Volume headset (no helmet)! Next-> low volume - but next call... MAX AGAIN!

  Please help me!

  5 Android, XT1068, Dual Sim, of Poland but the phone is purchased in detail of the Germany.

  Try safe mode - if this solves the problem, then it's probably an app you have installed.

• Big problem with Windows XP, IE8

  I have a big problem with windows xp. Many things do not work as they had passed him. For example the personal setting are not recalled from session to session. IE 8 does not funtion properly (icons on the desktop are re-arraged, toolbars cannot be deleted or I'm unable to load pages from the internet). Programs do not work, the files will not open. When I look at my hard C disk folders and files are hidden.

  Recently, IE has been upgraded to IE8 and I installed Norton 360 but I don't mean that they caused the problem. However, whenever the Norton scan executes a "error 8 506 421" stands up and says me that I have to uninstall and re install Norton.» But I lost the ADMIN privileges so I am not able to uninstall or go back to a restore point.

  I can't go in safe mode. Pressing F8 takes me to the quick screen C not the windows safe mode screen. I can't go in safe BOOT mode. INI or the other.

  If I switch to another user, everything seems fine but I don't have ADMIN privileges with this user to be able to make changes.

  Is this a problem with norton? IE8? A virus?

  Any thoughts will be greatly appreciated.

  Thanks in advance,

  Lost without a computer

  It sounds like you have a corrupted for your user to administrator user profile.

  You may be able to recover using System Restore to restore to a point in time before your problem.  Based on the F8 key, you bring in a command prompt window, try to start restoring the system to the command prompt by using the following procedure:

  "How to start the System Restore tool by using the option of safe mode with prompt theCommand in Windows XP"

  <>https://support.Microsoft.com/kb/304449/en-us >

  If this does not work, you can still be able to recover by performing a check disk to your command prompt window operation (after that you press the F8 key).  Enter the following command:

  CHKDSK c: /R

  If you are in the Recovery Console, it can simply begin, or you may need to restart before it will start.  Corrupt profiles are most often caused by the Corruption of system files, so a chkdsk operation should be performed little matter how you end up recovery.  Note that this can take a few hours to run.

  "How to perform disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Problem with my ESXI

  I have problem with my Esxi 5.0.when, I installed whenever I got a message.like like NO ADAPTER NETWORK NOT FOUND error in my ESXi software.

  How reslove it .or how to upgrade the lan installation software. Please give the correct soluction.

  A tried

  I activated the lan in the bios

  It could also be that your NETWORK adapter driver is included in the ISO file.

  If you NIC are supported (on the HCL) then you can simply load the appropriate driver or create an ISO custom (with the help of the image generator) with the correct driver added.

  Here are some links that you can check:

  Image generator:

  http://www.YouTube.com/watch?v=AfjEyB2FTwc

  http://virtualbill.WordPress.com/2011/08/19/VMware-vSphere-5using-Image-Builder-for-custom-installation/

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.vSphere.install.doc_50/GUID-C84C5113-3111-4A27-9096-D61EED29EF45.html

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2005205

  Custom ISO

  http://www.ivobeerens.nl/2011/12/13/VMware-ESXi-5-whitebox-NIC-support/

  Drivers:

  http://downloads.VMware.com/d/info/datacenter_cloud_infrastructure/vmware_vsphere_hypervisor_esxi/5_0#drivers_tools

  BR

  A. Mikkelsen

• I have problems to install ESXi 3.5 in a Gigabyte G31M-ES2C Board

  I have problems to install ESXi 3.5 in a Gigabyte motherboard, fails the installation process, the console says fatal error, the entire message is:

  Model G31M-ES2C

  Serial number abandoned

  BIOS Rev: CF

  Help me, please

  ESXi is very demanding and specific with regard to the material. There is a very short list and I do not think that your software is on the supported list. You may be able to get hardware not supported for installation, but you must work there. I would look on the site http://vm-help.com for possible solutions for your hardware not supported.

• My dear friends, I have Acer s2oo smart phone. I have a big problem with it

  My dear friens, I have an Acer s 200 smartphone. I used it for many years. but now I have a big problem with it. Dears when I turn it on it is the acer logo appears on the screen, but then it keeps this process. I mean after 5 or 6 hours, when I look at my phone always logo Asher on the screen never turn off or work. then I have it connected to my computer in order to re program the windows installation, but my computer does not connect to it. My dear please help me

  How can I get it back. What kind of program will help connect my computer. If such a program exists please could you give me the link of it for download. Please help me. Take care.

  Wow this is a very old smartphone

  I suggest you take a look at this forum to find some tools useful/rom:

  http://Forum.xda-developers.com/Acer-F1

  Here you can find some ROMs to use to try to repair your S200:

  FTP://FTP.Acer-euro.com/Smartphone/S200/os_images/

• I have a big problem with Windows Live essentials 2011. 0x8007064c error code

  I have a big problem with Windows Live essentials 2011.  I can't find in Add and remove programs or in C:\program files to remove it if I can reinstall it.  I went through the registry and deleted all instances of it.  When I try to reinstall, I get the error 0x8007064c code.  I've done everything I can find to do, but to no avail.  Help, please...

  Hello

  bad forums

  Repost in windows live forums

  http://windowslivehelp.com/

• BlackBerry Q5 big problem with BB Q5 data - IP ADDRESS REJECTED. :( :(

  Hi all!! I have a blackberry Q5, the version of the 10.2.1.2102 software... It is the best blackberry smartphone I've ever had! but since one week, I have a very big problem with my BB Q5: if I want to surf the internet, with data from my phone (not in WIFI mode but with the data of the phone (4G, 3 g +)), I can not go on any website, but the only thing I watch is a white screen with this message "ERROR HTTP 403.6 ": the IP address of the client has been rejected"...! What can I do? I'm really desperate! I called my provider (SFR), they told me that my connection is ok, I'm not a problem with them, and this is my phone... HELP ME PLEASE!  

  Hello!!! Just to say that finally, after several attempts, I have solved my problem: there was a problem with my service provider SFR with my phone! I regret bringing this up on the forum, but when you call the customer service you think they know their work... but fortunately for us if we have the blackberry is because we are not so ignorant on the connections, network and telephone line! : D have a nice day blackberry users!   

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with photoshop!

  Big problem with photoshop! 6 days ago, I expired trial version of photoshop for a month, four days ago, I purchased a monthly subscription only for photoshop, after trying the steps written on the adobe page, yet I can't use photoshop because it says "trial has expired" when I try to click on buy says 'already purchased package' but the problem is that even after having uninstalled and reinstalled all adobe problem reports. talk about the Mac in Photoshop version. Being the center of Italian service does not even exist in my language... Sorry for my bad English, I hope someone can help me!

  According to the information of your account you have not activated your Computer.Looks as something must be considerate activation.

  See Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications and follow the steps. /

  ~ Assani

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Adobe Muse - big problems with SEO/metadata?

  Hello

  I just finished mysite using muse adobe but I have big problems with the metadata tool, basically, it does not work.

  I can't find my site anywhere on google except if I type in the domain itself, despite the fact that I inserted a full description and several key words.  When it seems that the description is not what it is supposed to be. Rather than taking the actual description, it must be just a paragraph of my site.

  Metadata Adobe Muse option actually works? Anyone who has used with success. Seems to be a major flaw in the product Adobe Muse.

  While Muse inserts metadata into your page correctly, search engines do rely not 100% on this subject. You can add semantic properties to your pages by creating paragraph styles, applying, and then choosing the tag type in the paragraph style options. You can add h1, h2 and so on, for example.

• Problem to install ESXi 4.1 update 1

  I had a problem during the installation of VMware ESXi 4.1 update 1. I have attached an image with this mail. It appears once I hit F11 after loading files and the acceptance of the license to install and do not operate. Could someone help me please.

  I'm not familiar term "Proliant model". is the term of avobe you wanted to say

  HP appoints its servers "Proliant", for example HP Proliant G7 BL460.

  To install ESXi on this server model, you may need to use HP custom image. Please take a look at http://kb.vmware.com/kb/1035114 for details and the download link.

  André