Problems at work

Similar Questions

• I bought LR6 and during installation, he repeats to me "we are unable to validate this serial number" but I am connected and my serial number indicates in my account and the email that I received... What's the problem? (working on a < Mac)

  I bought LR6 and during installation, he repeats to me "we are unable to validate this serial number" but I am connected and my serial number indicates in my account and the email that I received... What's the problem? (working on a < Mac)

  Hello

  Please see the below help document to fix the error:

  https://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  Kind regards

  Sheena

• I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope y

  I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope you find a solution for the same. Help with the help of Adobe Muse CC

  Liston Hi,

  Steps to follow:

  1. Try to make a new complete site structure in MUSE and try to add a few pages and tries to remove it, just to check its not having not problem
  2. If the problem persists even, check if your site is stored on the external hard drive. Note: site should be registered on internal hard drives.
  3. Try to revive the MUSE, if the problem remains the same, we will refresh the preferences of MUSE.

  Hope it will work.

  Thank you

  Prabhakar Kumar

• express problem airport works as a wired wifi Extender

  I have TW cable for internet in bridge mode and not as a DHCP server.  This is directly related to the port WAN to a time capsule extreme Airport (1-2 years).  The time capsule has a link to 16 port 10/100 netgear switch to one of the LAN ports.  About 3 weeks ago, I added 2 new Airport Express to expand the wifi of my very large House.  I ran the hard lines to the Airport Express as well.  Each express is set to bridge mode and just to extend the wifi network.  The extreme time capsule is the DHCP server.  Everything works fine as long as the couple declares itself to the extreme to the wifi, but this does not solve my problems of scope and speed on the other side of the House that expresses it is installed to cover.

  Problem: When it expresses the airport is not connected I get a ping void 5ms from a computer on the local network to express it and extreme.  Once I Plug one of them in the cable system my time to ping for all devices are very erratic.  From time to time they are in the range 1-10ms, but more often they are in the range of 1-2 seconds and exhale.  Once, I disconnect or hard of the line time to ping back to normal within 5 seconds.

  Troubleshooting attempted so far: even once, I connected one or the other of expresses it to the hard line the problem occurs.  Disconnect it and connect the other the same thing.  Connect them directly to the Airport extreme still same thing.  Connect the express directly to a PC and run ping test, void 1ms response times and no change for the rest of the devices.  Ethernet connected to the WAN port of expresses it instead of the LAN port same question.  Repunched and re made the end of the cable used to one of them, same problem.  Called Apple and they told me it should work, and provided with additional troubleshooting.

  Firmware on all the devices have been updated about 3 weeks after I got them stable on wifi.  Unfortunately I do not have the written down version, but they are all on the same version now.  All devices have a green light on them when just using wifi to talk to the extreme.  When wired in airport utility devices drop the GUI are available intermittently and back.

  Whats to test I can think of to the left: replace the extreme airport time capsule.  Replace expresses it.  Wipe off the network completely and start over from scratch with a factory reset complete.

  Any help would be appreciated, I am amazed as to why it does not work.

  Each express is set to bridge mode and just to extend the wifi network.

  And this... extend the WiFi network... is the problem.  When the Express is configured to "extend a wireless network", it waits a connection without wire of the main router. When an Ethernet signal is applied, this translates a huge feedback loop blocking, network.

  Start over and do a hard reset on each of the AirPort Express devices

  Then for the Setup, use a short piece of spare Ethernet cable... any length will do... and plug it between a LAN port <>- on AirPort Extreme on the "O" WAN port on the AirPort Express Terminal

  Don't forget to make the Ethernet connection before you try to implement the Express. In this way, the "Wizard" will pick up the Ethernet connection and apply the correct settings for the Express installation.

  Use "Wizard" Apple's Installation in AirPort Utility to configure things. When you do so, you will notice that the final configuration screen will indicate that the AirPort Express is set up to "extend with Ethernet', who must confirm that the correct settings apply to the Express.

  

  The first Express is now properly configured. It turned off and move it to the remote location where it is needed. If your Ethernet cables and the Ethernet switch works correctly, so too the Express will work properly.

  Implement the second Express exactly the same way as the first, except him give a different device... as Express2 name, for example... to keep things straight.

• Having the same problem - nothing works

  Hello

  Tried everything on this subject and on other forums of support and could not solve this problem.

  I see a German number on my phone, probably since my last visit in Germany, where I used a local SIM card.

  Any help is very appreciated.

  Thank you!

  Rachel wrote:

  Hello

  Tried everything on this subject and on other forums of support and could not solve this problem.

  I see a German number on my phone, probably since my last visit in Germany, where I used a local SIM card.

  Any help is very appreciated.

  Thank you!

  Where are you seeing this German number? What exactly is the problem here, except that you see this number? The phone works with your current SIM card? This local SIM set up a profile on your phone? You would see this in settings > general >

• Satellite A100-405 has problems when working on sector

  Hi everyone (sorry for my bad English)

  When the laptop is charging or just work on sector it slows down (he sews to doesn't work does not correctly), but the biggest problem is when I play (a simple game that does not have the best perfomances like Midtown Madness 2) or a recent game like NFS carbon it does not start the game, it stops and I need to restart or when I'm looking for a movie (especialy with windows media player) It slows down or stops the game

  When I use it on the battery, it will not disappear or happen less often.

  At first, I thought it was a software problem, but I tried all bios, chipset, video card, recovery of product update and other system (xp pro,...) it did not help

  I don't think it's the battery because I deleted and tried to work on the area, the problem was still there

  I do not have an idea more so someone might help (and sorry again for my English bad hoop you understood what I wrote)

  my configuration:

  Centrino duo t2050 1.6 GHz
  1024 MB of RAM memory
  NVIDIA geForce go 7600 256 MB

  Hello

  so if you really tried everything then it would be wise to bring your machine to a local certified partner for a checkup of material.

  I suggest you follow this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  You can search the center of service available in your country and send them to your machine. They're going to take a look, you may have some serious hardware problems.

  Good luck

• Problem installing Works Suite 99 disc into my XP computer. I don't know the product identification number.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I try to install Works Suite 99 my drive in my computer XP (it was previously in an old computer running Windows 98.  Setup requires a product ID number that is not in my documents of purchase in 1999 of 20 digits.  My computer has XP on a programme of work 2004, but prefer to use the simplified version of 1999 instead.  Can anyone offer suggestions to overcome being blocked by the need for a product ID during the installation.

  Thank you. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Ted008gar,

  You must contact Microsoft Customer Service and Support to locate and get the product key from the disc. Access the link below to learn more on how to identify, locate, and replace a product key.

  http://support.Microsoft.com/kb/811224

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update - not the usual problem (it works!)

  Windows 7 SP1; Windows Update works, BUT when it's an automatic check (daily?), that it takes about an hour and fully use a CPU at 100% during this period.  Pointers appreciated.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/fwlink/?LinkId=231149

  Please provide the exact details of any problem it reports as not fixed.

  Windows Update error codes
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/Windows-Update-error-codes/bd72b821-05bf-4EFD-BEA1-b0be08fffe54

• WinRAR-WinRAR problems stopped working

  Dear all,

  I have windows 7 64 bit. It did not work properly. But today, a bottom right message, he said there was a problem of pc I clicked and he said that

  A problem with Win RAR

  has stopped working properly.

  A newer version of this software is available for download that resolves this problem. RARLAB recommends updating to take advantage of improvements to stability and security. Unfortunately I do not know how to distinguish that one in the list that I need to install or update from the Web site.

  I will be grateful if you could help me in this issue.

  Thank you very much in advance

  concerning

  AlFarid

  I have windows 7 64 bit. It did not work properly. But today a message at the bottom right it says there is a pc problem, that I clicked and he said

  a problem with Win RAR has stopped working properly.
   

  A newer version of this software is available for download that resolves this problem. RARLAB recommends updating to take advantage of improvements to stability and security. Unfortunately I do not know how to distinguish that one in the list that I need to install or update from the Web site.

   

  I will be grateful if you could help me in this issue.

  Thank you very much in advance

  concerning

  AlFarid

  WinRAR is not a Microsoft application.  If you have purchased WinRAR - you should upgrade to their latest version (if it will cost whatever it is, that is the responsibility of the manufacturer WinRAR).  You will need to contact them with your purchase information in order to understand what you need.

  If - as some in front of you - you did not purchase WinRAR, my suggestion is to remove it from your computer (Control Panel programs and features) and install 7-zip from 7 - zip.org instead.  It of free and has many features more would need WinRAR and more.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• Problem at work Database

  Dear all,

  I installed oracle 10g successfully and was able to work without any problems. After a few days, I deleted the database using dbca. Then I removed all information from the registry. After that, I created a database using dbca. Now I can not connect database except sys as sysdba. When I connect by sys as sysdba, it says 'connected' but I can not run any sql statement.

  Then I am running desc v$ database; He returned with the error ORA-01034: ORACLE not availabe

  Then I am running select * from database v$; He returned with the error ORA-01012: not connected

  Please help me solve this problem. I am using Oracle 10 G on Windows 7 Ultimate 64 bit.

  
  

  Thanks in advance.

  Adelia
  

  Hello

  You have installed an incorrect version of oracle.

  Please check if you have 32-bit OS and then install the correct version of another 64-bit

  -Pavan Kumar N

• Failure of the conversion due to SSL certificate problems - can work around this problem?

  I began the process of migration of a collection of virtual machines in an environment of KVM to an existing cluster of vSphere and try to use the converter (5.5) do a dynamic conversion/migration of a Ubuntu box, but it does not reason create the virtual disk on one of the hosts because of the SSL certificate, and I found no other messages or articles specifically on this (looks like most associated with SSL include improving speed)

  In the worker newspaper, I can see that:

  • The converter is able to successfully create the target VM
  • The attempt to create the virtual disk is defective for the certificate SSL is not invalid (all systems in the cluster appear to be using default certificates from VMware).  In the log file of the worker:

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL_IsVerifyEnabled: failed to read the registry value. Falling back to the default behavior: verification on. LastError = 0

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: SSL unknown error

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: connection failed

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: The certificate of the remote host has these problems:

  ->

  -> * The host certificate chain is incomplete.

  ->

  -> * unable to get local issuer certificate

  2014-08 - 07T 09: 35:13.947 - 07:00 [info 06620 'Default'] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  • The goal of the virtual machine is removed.

  Is it possible to simply disable the validation of certificate for this process?  In the newspaper, it looks like a registry key that it would control, but I have not found any information on this subject (or guessed correctly).  Or can I import this certificate on the local Windows system running converter to get around it (I could not with this approach, but either)

  It's really not clear to me which system validation.  While the worker log shows it connect to the vSphere host, there is no such line indicating it connects to the host where the target VM is located, and it looks like this is the host with the certificate which is considered not valid.   Validation occurs not on my local system running the converter? (the parameters of the vCenter server shows that the box 'vCenter requires a verification of certificates SSL host' is unchecked already)

  Thank you

  Scott

  You might want to take a look at Re: an error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination and let me know if it works for you.

• Adobe will never address the problem of work on a fragmented hard drive?

  I spend a lot of time to defragment my hard drive (450 GB with 150 GB) free in order to ensure that the pre works without errors.

  I do not tend to make fairly long high-definition videos (two hours).  However, it seems that this problem could be addressed and the fixed Adobe would send some effort his way.

  Am I wrong?

  It's a question of operating system. Not a problem program. Mac, for example, do not have this problem.

  With any intensive program - especially when working with large files - you need huge blocks of contiguous disk space. Fragmentation that hinders.

  In the meantime, the simplest solution is to keep your publishing projects and media on a second hard drive. It's your drive C that gets defragmented everything, after all. A second disc media and projects (that most publishers recommend in any case) develops very little fragmentation of files and, especially if it's a large, takes very little maintenance.

• Problem the work cs3 to cs5 file

  Hello

  I am trying to open a document I created with the CS3 version in cs5.

  This weird thing happens to a few pages.

  I can see the images and the text, but I can't work on it.

  Also it does not read the links of the images.

  No idea which can do it or why is - what happens?

  Objects that are locked by default in CS5 are not selectable. You lock postions them in the CS3 file?

  The only reasons I can think of for an image not appears in the links are if has been stuck or there is some kind of corruption. The links show in CS3?

  This question brings up an important point on the use of files inherited in new versions. It's REALLY a good idea to register a new name of the new version, just in case you think you have to go back. CS5 files are not backward compatible (it's nothing new - No .indd file cannot be opened in an earlier version than the one in which his last record), but you can export .idml for opening in CS4 with certain reservations.

  Enough users report problems with files inherited in CS5 I now recommend an exporting to IDML as a first step, and then open, save as a new .indd and go to work.

• Problem with working with Add/Remove instance incorporating the checkbox

  I came into a problem I tried to understand since last week. I had searched on Google for some tips, but I can't find anything useful.

  Currently I have a table that has a button addinstance and removeinstance. The script for this work.

  What I'm trying to do is line starts in readOnly format and when I select a check box, a cell will become open (I have a table with 12 cells in a line and about 6 to 7 boxes which will open some cells). However, when I add an instance and one of the boxes is checked, the following line is always readOnly. How to target these certain cells? If I have a box checked and I add a new line... some these fields will be open to all cells in this column.

  If someone could help me, that would be great.

  [email protected] wrote:

  Thank you so much, Jono! It works perfectly, I just added an extra line of script to do exactly what I needed. I don't think I'd be able to do it without your help.

  Glad it worked! I wasn't too sure I could make it work myself, took a few tries moving things in the right order.

  With this, I have 1 last request if you could perhaps help us... I was wondering, there is a button to send e-mail in the personalized section... is possible to have the object to display a standard text as well as what a person gets into a certain text field?

  example: ask outgoing # --> (standard in all areas) [Text Field] --> (entered manually in the textfield object number)

  There quite a few threads covering that here, I have not tried playing with it, me.

  This one has a sample by Paul that has a bunch of different email options:

  http://forums.Adobe.com/message/2109201#2109201

  And it seems like he got a bunch of info:

  http://forums.Adobe.com/message/1356572#1356572