Problems of fonts on 4.1.1

Similar Questions

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• problem of fonts in Windows 2003

  I use windows 2003 Server, Enterprise edition. I found a problem with fonts. When I install a required font in the windows fonts folder, as it does not appear in Ms-Word or other programs. After installing a font I have unlock. Although I have unlock her did not appear in Microsoft Word or other programs. I need the fonts that I intall on my computer and I am badly in need to use. Please give me a clear solution, that I can use my fonts installed in my computer. my email is * address email is removed from the privacy *

  Hello JoniBhai,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problem with fonts. If enable hardware acceleration "BOLD" fonts look weird, but if I turn it off, "BOLD" fonts seem good, but normal fonts look weird

  Title.

  With hardware acceleration: http://imgur.com/jHRk6Yl words 'empty' look and really weird air instead of being "BOLD". But if I disable it, normal fonts look "weird" in some Web sites (not all) and are difficult to read.
  Any solution?

  Thank you!

  Hmm, another user Windows 10 reported this after installing some Helvetica fonts.

  In your screenshot, the text 'blue indicated' is the following style rule:

  font-family: "helvetica neue",arial,helvetica,sans-serif;
  

  So I guess you have Helvetica Neue installed locally, which seems to have strange problems in Firefox.

  If you don't want to remove this font on your system, you can use custom style rules for Firefox overrides Arial, which is what I see on Windows 7 on this page. I saw the first time that documented in this article (from 2010!):

  Helvetica on Firefox: the substitution of fonts with CSS | Keyvan Minoukadeh

• Why I recently began having a display problem with fonts.

  I recently started seeing a lower quality fonts display in my web depending on the e-mail program and it cannot identify what has changed on my pc, unless it's a Firefox update. Also noticed that the Google search results headers have small dots on top of all the letters.

  The two pictures show my web mail in Firefox and in IE, which is how the fonts used to display in Firefox. I also noticed that this happens on emails, apparently at random, as some will actually display the fonts correctly. I'm running worm. 36.0 and it is up to date.

  Well, I tried to download the images for a while now, but I don't see if there is progress. I can send the .png files if anyone is interested. Thank you.

  Hi, this is probably caused by kb3013455 of update from microsoft that can cause problems of rendering fonts on vista:

  After you have installed the 3013455 security update, you may notice a degradation in quality of text in some scenarios. The problem occurs only on systems running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available.

  ^{Reference: https://support.microsoft.com/kb/3013455}

  in order to answer you'll have to install manually this followed fix provided by microsoft, which should fix the problem: http://support2.microsoft.com/kb/3037639

• Problems of fonts on Web sites

  Firefox Aurora and developer all display the fonts on my Web site that are broken and difficult to read. Tried almost every answer forum on this so far and nothing. Fonts to watch a cartoon like (in Gmail) or they are a broken old look Times New Roman. Quite frustrated because it is difficult to read on the screen, and that's what I do 90% of the day.

  Hi ryheintz, this is probably caused by kb3013455 of update from microsoft that can cause problems of rendering fonts on vista:

  After you have installed the 3013455 security update, you may notice a degradation in quality of text in some scenarios. The problem occurs only on systems running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available.

  ^{Reference: https://support.microsoft.com/kb/3013455}

  an option may be to tackle this particular update for now until there is a fix from microsoft or you could also look at if there is a graphics driver update available on the Web site of the seller (intel/amd/nvidia) which could also be solved this problem in some cases.

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• [Bug] Problem with fonts in iTunes Store 12.3.1.23 caused by Helvetica

  More than 5 years the users report problems of police in the iTunes store.

  End of 2015, version 12.3.1.23, I just see that this bug is not resolved:

  iTunes store shows correctly, but when I activate the police "Helvetica Neue Condensed Bold - OpenType - PS, foundry Linotype AF", here's what it looks like:

  

  I really hope that developers will find a solution to questions of the police in the future. May use... Google fonts?

  Do you mean allowing police Helvetica Neue Condensed Bold is a problem, or correct a?

  Apple Developer don't read these forums. You can report a problem via the relevant feedback form, for example iTunes Feedback, or sign up for free one has Apple Developer Connection and make use of reporting bugs to Apple.

  TT2

• Police problem - all fonts show as "BOLD" even if the bold has not been successful.

  No matter what I chose to compose e-mail, for example, Times New Roman, size: 12 Pt, police the selected font will appear as if I clicked on the B for the bold. The only size font which DOES NOT appear as "BOLD" is the 8pt font. This problem of police comes little matter the type of font, I chose. For a short time today, the appearance of the police showed that the type was in CAPITAL LETTERS, even if the CAPS LOCK SHIFT key was NOT enabled. I could not return to the low case letters, so I restarted my computer, and only the UPPERCASE function had returned to normal. The "BOLD" type always appears any police, I chose, UNLESS I reduce the font size to 8 Pt, for each single font from the list of fonts in Outlook Express. Can you please explain how it happened, and most importantly, how to fix? Thank you.
  Barbara Lowell

  Hello

  Try to check and clean boot:

  http://support.Microsoft.com/kb/929135

• I have problems of fonts in Windows XP Professional.

  I'm trying to import fonts into Windows XP Professional SP3. These are extracted from a Mac using 5 Fontographer and imported commercial policies in the TrueType. If I have four font files in a family (American Garamond Roman, American Garamond Italic, American Garamond Bold and American Garamond Bold Italic), four files appear in the police file and the registry. However, when I discovered the fonts under XP, the Roman and italic will be Roman and bold and bold italic will be just "BOLD". It seems that Windows does not recognize the other files. When I try to import them, it tells me they're there. These fonts were separate before the import, but not after.

  This could be the cause? Is there a solution?

  Symptoms suggest that the problem is how Fontographer generated data in the actual font file. Windows is not find data to correctly map the police to its menus. In any case, the most likely source of help to solve this problem is through aid or FontLab or Fontographer user sites.

  Microsoft provides several programs Garamond (sources of Agfa Monotype). If you have one of those, you don't have to use a converted version.

  http://www.Microsoft.com/typography/fonts/font.aspx?FMID=1305

  Tom Ferguson

• problem with font size (LV2011SP1) scheme?

  Hello

  I just found "interesting behaviour" using LV2011SP1:

  I try to set the font size of the elements of the FP like this:

  

  The upper graph is selected and I choose the font size = 18 in drop-down list of font settings menu. So, what do you expect?

  The façade which result looks like this:

  

  WTF?

  Why of scoreboard containing indicators digital change their font size when I selected the entire chart? Why the chart does not change the size of the font of its numeric values (ranges...)?

  Any thoughts on this "behavior"?

  GERD,

  good news: it seems that it is a known problem reported as CAR #306025.

  It seems that all the font properties changed for a graphic element effects all PS elements that have been created/square AFTER the chart element.

  hope this helps,

  Norbert

  EDIT: The CAR was filed for LV 2010 SP1. It is still not resolved, this is why 2011 presents the problem as well.

• Problems of fonts Windows Mail after installing IE9

  I just installed IE9 (March 14, 2011) and started this complex problem. Have Vista Ultimate and use Windows Mail. My default font is Verdana "BOLD" by 10 points. With IE9, it seems much too fat (never appeared like that with IE8). Other fonts appear also too fat.
   
  Another strange aspect of the same problem, at the bottom of the HTML emails, you have three buttons (source combined, called edit): Edit Source overview.  Since IE9, they appear in bold - possibly a slightly larger than before in IE8 font.
   
  My emails stored in folders are in HTML format and on which they are considered, the fonts have changed since installing IE9 on many emails - but not all emails. The fonts must be Verdana 10 pt bold or some other fonts are now appearing in Times New Roman 10 points.
   
  There is a second distinct problem with TNR in Windows Mail. I used TNR 12 pt for an email and after you send the email, it appears therefore as TNR 10 pt when a response is received. Regardless of the source of the answer. I never use TNR 10 pt because it seems too small for most people. Somehow 12pt changed to appear over and over again as 10 pt. And now, he continues this model since I use IE9.

   

  A possible connection to explain to the police by changing the above problem. The default value for IE9 is TNR. [Tools > Internet Options > general tab > Fonts] Shouldn't some Web sites appear in TNR? They ALL appear in some other fonts, possibly Verdana. Affecting TNR font in the results of the accessibility in all fonts in all the websites appearing in TNR. I suspect when I changed the accessibility implementation, that in addition to changing Web sites, it also changed policies to e-mail in Windows Mail. I've since unchecked accessibility and "Fonts" are defined by default (TNR). The stored emails continue to show police TNR, that they do not return to Verdana.

   

  Anyone with similar problems?  Anyone has any ideas how to fix these issues?

  You can set the default font in Internet Explorer to the font you want in the mail via Tools client | Internet Options | Fonts.  Otherwise in IE9, you're stuck with what you have for Windows Mail.  The changes are again DLL located in IE9, and you cannot change these DLLs unless you go back to IE8.  Products of its Microsofts, so that they are accountable for your results.  Yes, delivers his "squarely" by Microsoft.

• Problems with fonts

  My fonts, such as displayed on my screen, have suddenly become thin and spider.  This affects all my windows applications, including the body of the messages to and Works word processor. I assume it is the result of an automatic update of Windows. Any ideas or similar experiences out there?  This does not affect the result, it come out as usual on the printer

  You could try to change the resolution of your screen and see if that makes a difference (right-click on the desktop and choose personalize).  It could be dies however, that your video card or monitor.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Thanks Steve.  Yes, I restart frequently. The problem has been with me for a week or two

• Problems with fonts and the Fontcache.

  Recently, I noticed that a Svchost was running constantly at high CPU usage, as well as a few programs had stopped working on my PC. After doing some poking around, I believe the problem to be with Fontcache and my fonts. It turns out that my partner has installed a large number of fonts, which I suspect to be corrupted. Unfortunately, I can't open the fonts folder, or the section fonts in Control Panel.

  In an attempt to put an end to the use of the processor (which I think is of Fontcache constantly trying to start upward - and otherwise), I have disabled loading in services, however it still loads up when I try to start a program like InDesign. InDesign will also not load, I suspect that for the same reason.
  I could not remove all the fonts, or find no way to remove them, without access to the section fonts in Control Panel. I tried to access via a command prompt and just can't take the ownershop/control of them to remove them. All of the guides I found on the internet forced me to open the folder of fonts/Control Panel and manually change the permissions using the Windows user interface, but obviously I can't do that.
  Does anyone have a solution to remove fonts or an another workaround for the problem?
  Thank you
  ~ Fishy

  Hey shady,

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you are unable to remove the control panel fonts.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what happens when you try to access the control panel?

  2. do you get any error code or error message?

  I will certainly help you with this issue.   Here are some methods that you can try in order to solve the problem.

  Method 1:

  I suggest you run the troubleshooter of performance on the system and verify.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Remove the fonts in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  For more information on fonts, check out the links.

  Install or remove fonts
  http://Windows.Microsoft.com/en-us/Windows7/install-or-delete-fonts

  Fonts: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/fonts-frequently-asked-questions

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Problem sending fonts (2)

  We did all the steps of the police-manifest (https://helpx.adobe.com/digital-publishing-solution/help/cards-layouts.html#fonts-cards), but we are unable to download our fonts on our generation. We read the last topic on this subject and we followed the steps given by Andrei, but without success.

  «During the creation of the manifest, please make sure the json file is actually named "fonts - manifest.json".» If you name fonts.json, the fonts will not be cooked properly in the application and will not work. (it was the problem this time) We seek to 'manifest-free '.

  Here's our manifesto: https://www.dropbox.com/s/6g4i7to7f1ojrc9/font-manifest.json?dl=0

  Could you help us?

  I took everything what you do - manifest.json text and copied in a couple different online tools online JSON validator and they all came back invalid. It looks like a number of hidden characters which causes the failure. The first three successes with this query return a few tools: json validator.

  To clarify these hidden characters, you must format the JSON as a text file. I hope this helps. If this isn't the case, I suggest you contact the support, it is maybe specific to the font files.