Problems of formatting with Satellite P25 2 GB SD card

Dear members,

Although I spent hours looking for an answer to the question above without success, I felt that I had to ask him once more. So, it's here (and sorry if this has been asked and answered already, maybe someone can tell me the right thread...).

I have a laptop Toshiba P25-S5093, that was my serve. I bought it new over 4 years ago. Recently, I decided to take advantage of the embedded in my laptop SD card reader/writer. I bought a * _regular_ * SanDisk SD 2 GB (* not the HD - SD format *) and when I plug it in, I see the SD blue LED lights momentarily on my keyboard. I can even see that the _laptop reads the correct capacity of the card_ when I right click the icon. However, the system says that the card is not formatted and ask me if I want to format.

Then, when I'm using the Toshiba format utility to format, it hangs for 2-3 minutes (I see the led Flash SD LED blue) and gives me the following error message:

* TOSSDFMT: Unexpected error! Error code = 0x0340FF00

I tried the quick format and a full format, with no success whatsoever. I exchanged for another 2GB SanDisk memory card, still the same problem.

I downloaded the last SD formatting utility from Toshiba Web site (the latest utility driver looks old, it still 2003) and always without success.
_Toshiba SD Card Format Utility Windows XP/2000 (v2.01.0; 09/09/2003; 1.75 M) _

What is so intriguing is that both cards SD I've tried in vain on my Toshiba laptop, * work a lot on my brand new laptop working from another manufacturer *. * These cards are also fully recognized by my Canon or Fuji digital camera *.

* If I use a USB card reader adapter, these cards are recognized by my laptop. This seems to point to a problem with the built-in SD slot or Toshiba driver / or Windows XP? *

Notice to lovers? What gives?
Thank you

PS: or as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so. Can someone explain to me * what are these BT stacks for * and how they align with what I have built-in hardware terms. Batteries BT BT "ready" but * no match *. I downloaded the following, but my virus detection was not happy with this file:
_Toshiba Bluetooth Stack for Windows XP/2000 (v4.00.36 (T); 28/04/2006; 26.56 M) _

David

First P25 appears to be a mobile American, designed only for the American market.
If you need information in this series, visit the Toshiba site us.

One question; You are sure that the 2 GB SD cards are compatible and supported at 100%?
Seems too large is not supported!

> as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so

Did you find a Bluetooth label on the bottom of the unit?
If not then this laptop has not built into the BT adapter!

> Batteries BT would amount to BT "ready" but not equipped.
Yes, a lot of series is not delivered with the BT module but can be improved!

Tags: Toshiba

Similar Questions

  • Problems of recovery with satellite A30 303

    I launched the recovery utility, and then I selected the recovery mode in advance that my hard drive is partiotioned, and I didn't want to format the second partition where different data files were stored.
    The first recovery disc has been loaded and files have bben transferred, then when you are prompted to load the secondary drive an error message as single user are not allowed... has been shown.

    Abandonment of the utility and after rebooting I got following messages:

    Error reading registration MFT VOLUME FILE_
    Internal error 25030
    An internal inconsistency was detected
    Ok

    Then two pages of lines BACK describing the situation.
    The PC unbootable.

    Hello

    This first time that perform you the installation of recovery with comes from Toshiba Recovery CD? If this isn't the case, it is the first time that this problem occurred?

  • Problem of speaker with Satellite L750

    Hello!

    I had some problems with my internal speakers on my laptop Toshiba Satellite L750. I just got the laptop a few months ago, and so far, everything seems ok... except for the speakers.

    So if I leave the laptop and put it on "sleep" or "hibernate", when I come back to turn on the laptop, the sound from the speakers gets all blurry and begins to lag... I end up having to restart the laptop just to get back to normal speakers.

    No matter how long I leave the portable sleepers for - it might be 6 hours or 1/2 hour - almost everytime, I end up having to restart the laptop to solve the problem.

    It is not that I have a big problem with restart - I want to say, if this is the way to solve this problem, it's quite well! It's just boring after awhile and I don't want that there is some underlying problem that could lead to other parts of the laptop is messed up, I'm just ignorant.

    I'm certainly not a computer expert, but what I checked in the control panel and speakers news suggests that the speakers are working properly.

    I do not understand why this is happening almost everytime. In with regard to the sound being blurred and trolling, it's either the sound of the songs I listen to WMP, or whatever it is I watch online, or sometimes even both.

    Anyone has ideas or suggestions on what could be the problem and I could do?
    Any help would be appreciated.

    ? Thank you!!

    Over the last ten years, I used several laptops from Toshiba but I ve never noticed anything like that and it shouldn't happen. After the awakening of speakers should work normally.

    Are you using the original OS that you got with your laptop?
    Have you noticed this strange behavior from the first day, or later?

    Permanent reboot is not solution and maybe you should contact Toshiba service and ask for help. They should check this. What do you think of this?

  • Problem installing Bluetooth with Satellite C875 - 136 PSCBCE

    Satellite C875-136 PSCBCE-01J002FR

    Hello

    I have a problem with the installation of the Bluetooth driver.

    I tried to install the driver bluetooth on Windows 7 x 64 but the freezing of the "driver installation" installation in Toshiba Bluetooth monitor

    I have installed Realtek WLan, battery Bluetooth Realtek and after the Toshiba Bluetooth monitor.

    Do you know how to solve this problem?

    I tried also with the Toshiba Bluetooth monitor v9.

    Installed files:
    http://Support1.toshiba-tro.de/Tedd-...0510093258.zip
    http://Support1.toshiba-tro.de/Tedd-...0510084139.zip
    http://Support1.toshiba-tro.de/Tedd-...0914172315.zip

    Hello

    The point is that you have installed the BT tools and software in disorder

    To get the BT working, you need to first install the Realtek Wireless LAN Driver then the
    Driver Realtek Bluetooth package filter then battery Toshiba BT
    The reason is that mobile use a WLan / BT combo card.

    The application of the monitor BT transforms the Bluetooth module power in conjunction with the Bluetooth stack.
    If its not really necessary get the BT working.

    Here you can find the BT portal, including the BT stack!
    http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba

  • Problems of sound with Satellite A500-13F

    I bought a laptop Toshiba Satellite A500-13f and it's very good, but
    My problem is that the * sound cut when you're listening to music and returns after 30 seconds * and also * a product of her pulse in the left internal speaker sound when the frequency of the high musical rhythms *.

    Please help, please

    Hello

    What are the strange sounds that even with factory settings, the sound cuts. I can advise you to update the audio driver no form page driver Toshiba but from here:

    http://downloads.Guru3D.com/downloadget.php?id=2486&file=4&EVP=b3f15a2ab7c566c 9889ed65f5c7d5453

    If she's not always you help, there may be a hardware - related problem.

  • Coverage problems wireless "n" with Satellite A200 - 18M

    Hi guys and Wales,.
    Anyone would be able to tell me why when I a N of Belkin Wireless Modem, an 802.11n integrated on my Satellite A200 - 18 M I'm not able to always get the "n" extended coverage!
    My Belkin router is configured to allow the 802. 11 b, g & n the value of bandwidth at 20/40 mhz, WEP 128 security value, and yet I have never better than "g"!
    All my drivers are up to date for under Vista Home premium! Belkin say its something wrong with the laptop - a problem with the Intel Wireless Wifi Link 4965AGN, but Toshiba say it's the router Belkin then changed his opinion and say my ISP that do not support Vista (who used the same ISP for 6 months on a previous Satellite A200 on Vista I know they do and the ISP it is absurd to say!)

    I am well and really confused as to what else to try, I have Norton which I know can cause problems, but disabled it without success! Toshiba were supposed to have a 2nd level technician call me early in the week, but that the call has not come so before I return to them once again, because I imagine they must be very busy to hear, I was wondering if smart glances you can see the problem!

    Its give me wireless no problem for most of the time, but it is just the extension of the coverage I need that I don't get! To my my simple mortal brain reminds me, there must be a software problem? : 0
    I bought this machine 4 weeks who want a laptop that would allow me to get the "n" cover and bought a modem so that it can happen, I can't find what the problem is let me!

    Another issue that may be related, so I'll mention it, my father has a laptop XP Pro old to 3 years with an integrated adapter 802.11 g, a speed event (he uses my router) displays these results
    The results of Vista are: download speed 3267 Kbps (408 kB/s) Upload speed 255 Kbps (31.9 kB/s)
    Results Xp: download speed 2650 Kbps (331 kB/s) Upload speed 383 kbps (47.9 KB/s)
    Why XP gets faster download speeds that the machine Vista which gets faster downloads!
    Any advice will be much appreciated

    Cheers: x

    Hello

    regarding your "n" - problem: in your case, I'll try the drivers intel real-> www.intel.com

    Just visit the site, go to the download section and download the latest driver proposed to intel. Maybe that solved your problem. I would also check the following documents in the knowledge base:

    http://209.167.114.38/support/TechSupport/TSBs/all/-TSB001434.htm
    http://209.167.114.38/support/TechSupport/TSBs/all/-TSB001435.htm

    It could be that useful...

    And send your thing... I think it has something with the drivers to do, could also be a "non-optimal" framework of Windows Vista (no one said that Vista should be fast... :/)
    Perhaps an improvement could help: remove the "Qos service" of the wireless network connection, this could accelerate the flow towards the down/to the top a little.

    Cheers and good luck

  • Problem of volume with Satellite Pro L630

    Hello
    Brand new on these forums so forgive me if I am in the wrong part of the forum.
    My L630 bought 19 November 2011, and has downgraded the OS XP Pro. Problems with the volume that is barely audible when full! Is there than some tweak I can do to improve the volume?
    Thanks heaps...
    Murphy

    Hello

    You can try to adjust the volume to a higher level.

    Go to control panel of control-> sound, speech and audio devices-> sounds and Audio devices

    Now, go to the Audio tab (line from the top of the buttons) and in reading his article click the Volume button.
    In the Volume Control Panel, click the Options menu button and choose Properties.

    In the properties panel check all the boxes unchecked.
    Now you should see all the volume controls which could be addressed at the next level.

  • Problem of warranty with Satellite L450D-11V

    Hello.

    I just need some advice here.
    I own a Toshiba Satellite L450D-11V with a years warranty. I bought it in the city of Belfast in the United Kingdom.
    So that travel in Asia one of my Ram chips burn for some reason, and when I arrived in Australia, I had to get it replaced.
    Now the chip grilled while the laptop was under warranty, but at the time where I got to the shop in Australia, it was a month after the expiration of the warranty.
    It cost me a cool $ 194.00 to get a new chip in it as I understand, it was a Toshiba registered shop.

    Basically, I want to know who do I contact about this because I kept the broken part and any reception and relieved of taxes for the expenses.
    I understand it has been repaired after expiration of the warranty and so I am not able to get help, but I'm being honest when I say that it happened before hand and I'm pretty sure there's a way to check when it is grilled.
    If anyone can point me in the right direction or give me some advice, I'd appreciate it.

    Thanks for your help

    Marty

    Hello, Marty

    Are you still in Australia?
    I can recommend you contact Toshiba. You can try to call Toshiba hotmail and ask for help or advice.

    Please check the support page s Toshiba under http://www.mytoshiba.com.au/customer-contact/support
    You will find the phone number or how to use the Email from Toshiba Support.

    Bye and good luck.

  • Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7

    I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.
    It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart.

    What can I do?

    AFAIK you can't do much.
    Try again and let us know if the same problem occurs again.

  • Problems of recovery with Satellite L300D

    Hey guys, I was working this morning on my laptop until suddenly it crashed and closed. I thought it was nothing then I restarted and everything began to start. Windows Recovery skipped upward, so I chose to start windows normally thinking nothing of it. After waiting a few minutes on the loading screen, the laptop has restarted and brought me to the section of windows recovery.

    From panic I have maintain F8 to take me to the advanced boot options to try safe mode. SafeMode bagan to load it all until he stopped at windows\system\drivers\Atipcie.sys then a flashed blue screen and the laptop itself restarted again.

    I went ahead of the boot options to select repair your computer I thought I could just format using the rocovery disk partition. However the patition does not work properly just a control box with windows\system\drvload.exe written above. I have left this more than an hour, but nothing popped up.

    I then downloaded an iso of Vista recovery disk. and he burned on a cd - r. Then I tried to boot from the CD player that worked until he was asked to choose an operating system that I didn't save.

    After having messed around for about 4 hours now I don't really know what to try next. I have no recovery discs and I cannot yet access the desktop to make a. Any help or advice would be greatly appreciated.

    Your recovery image is messed up and you won't be able to use it. You also will be able to create recovery DVDs. This recovery must be created with the factory settings and I m really wondering why you didn't create it in the Council of last following Toshiba s (the s user manual).

    Now, you have two options:
    # For the original Toshiba Recovery disk in order for your laptop - https://backupmedia.toshiba.eu/landing.aspx
    # To install the operating system using the original installation disc of Microsoft and later install all necessary drivers, tools and utilities, more

    All of the drivers, the tools and the utilities that you can download from the Toshiba's support page - http://eu.computers.toshiba-europe.com

    If you have any other questions you are welcome.

  • Problems of heat with Satellite M70-173

    Need some advice.
    Have in last few weeks found that all side and sometimes in the middle of the laptop its got very hot to the touch.
    Have no idea what could cause this?

    Hi mate,

    I think it could be a cooling system that is full of dust. If the cooling system is clogged with dust and then the machine cannot carry enough heat of your machine which has been generated by the processor and graphics card. The result of this could be overheating, software errors and finish hardware malfunction.

    So, my advice to you: go to the next radio Shack or electronic market and buy a box with compressed air. Some blowing AIR gently hollow the vents and if dust comes out then you know where the problem is. Just clean the entire cooling system and make sure the cooling system is almost free of dust.

    Welcome them

  • Problem with satellite L40 12 X graphic card

    Hello, I have a problem with my graphics card. I have not now how to enlarge the memory video it s.

    Physical memory: 1015 MB
    Minimum graphics memory: 8 MB
    Maximum graphics memory: 224 MB
    Used graphics memory: 9 MB
    Processor: x 86 family 6 model 14 Stepping 12

    I tried to look in the bios but I have not found anything to expand my graphics memory.
    Please help me

    AFAIK, you can't increase the manually shared memory.
    The graphics driver controls this value automatically and depends on the RAM.
    If you want to use more shared memory, then the RAM needs to be increased

  • Problems of dll with Satellite A100-233

    My laptop A100-233 gives a message

    "the dll system uses 32 dll has been moved in memory." This application may not work properly, the vendor must be contacted for a new dll."

    This probably occurred after defragmentation, but I did not detect any defect in the work.

    Now, should I defragment or stop degragmentation frequently.
    I can't use the recovery disk for the fear of losing the updates.

    Hey! This problem is not a problem, you will find the solution at this link http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21968.

    Question had already been brought to the forum and many users of Toshiba, found the answer.

  • Strange problem of minimization with satellite notebook

    My screen is reduced to a minimum when I click on something without reason, then he's fine.

    Help, please.

    Are you sure that there is no reason for this? ;)
    Check the mouse settings. There you can define mouse buttons action. One of these options is to reduce the current window. Please make sure that this option is not set.

    Par_defaut, it must be set to check primary * select Normal, Normal Drag).

    If you have changed something?

  • Question about the use of with Satellite A200-10W USB network card

    Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.

    Hello

    Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

    If you have any other questions, then just ask.

    See you soon

Maybe you are looking for

  • I use Thunderbird worm 24.4, but recently my installed add ons do not appear?

    How do I get my Add ons to appear in thunderbird worm 24.4

  • Should I get the new iPod Touch or an iPad Mini 2?

    Hi, I'm tossing up between the new iPod Touch and the iPad Mini 2. I intend the device mainly for playing games and going on social media. I also want to speedy. Thank you! Also, I currently have an iPod Touch 5 gen and his microphone does not work.

  • Pop - ups being not blocked

    I have the latest Firefox (18.0.2) on Mac 10.7.5. A few days ago I have updated with the latest Java (7_13) because we use software in my company that requires it. Before the update, Firefox blocked two pop-up ads on the web site of my company (www.l

  • 'Cannot be fed to the internal Bluetooth module.

    'Cannot be fed to the internal Bluetooth module."Bluetooth is not ready." Bluetooth is missing in Flash (Fn + F8) cardsbutEverything is ok in Device Manager. I started my laptop L755 using F8 > safe mode > windows Bluetooth acknowledged as soon as it

  • Missing power supply Aspire S3-391

    Hello I just got my S3 of Aspire new-391 (NC-S3-391-53314G12ADD).The Quick Guide indicates that I must first read the installation Poster.The power supply is missing from the box! Does anyone know where and how to find the power supply?I'd rather mak