Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7
I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.
It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart.
What can I do?
AFAIK you can't do much.
Try again and let us know if the same problem occurs again.
Tags: Toshiba
Similar Questions
-
Satellite L300 - portable computer does not load
Hello
I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.
All responses will be apperciated, thank you.
Hi DeeDee_1,
If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too
Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.
Then contact the guy and ask for help. They can give you a good answer ;)
-
Problems of recovery with satellite A30 303
I launched the recovery utility, and then I selected the recovery mode in advance that my hard drive is partiotioned, and I didn't want to format the second partition where different data files were stored.
The first recovery disc has been loaded and files have bben transferred, then when you are prompted to load the secondary drive an error message as single user are not allowed... has been shown.Abandonment of the utility and after rebooting I got following messages:
Error reading registration MFT VOLUME FILE_
Internal error 25030
An internal inconsistency was detected
OkThen two pages of lines BACK describing the situation.
The PC unbootable.Hello
This first time that perform you the installation of recovery with comes from Toshiba Recovery CD? If this isn't the case, it is the first time that this problem occurred?
-
Problems of recovery with Satellite L300D
Hey guys, I was working this morning on my laptop until suddenly it crashed and closed. I thought it was nothing then I restarted and everything began to start. Windows Recovery skipped upward, so I chose to start windows normally thinking nothing of it. After waiting a few minutes on the loading screen, the laptop has restarted and brought me to the section of windows recovery.
From panic I have maintain F8 to take me to the advanced boot options to try safe mode. SafeMode bagan to load it all until he stopped at windows\system\drivers\Atipcie.sys then a flashed blue screen and the laptop itself restarted again.
I went ahead of the boot options to select repair your computer I thought I could just format using the rocovery disk partition. However the patition does not work properly just a control box with windows\system\drvload.exe written above. I have left this more than an hour, but nothing popped up.
I then downloaded an iso of Vista recovery disk. and he burned on a cd - r. Then I tried to boot from the CD player that worked until he was asked to choose an operating system that I didn't save.
After having messed around for about 4 hours now I don't really know what to try next. I have no recovery discs and I cannot yet access the desktop to make a. Any help or advice would be greatly appreciated.
Your recovery image is messed up and you won't be able to use it. You also will be able to create recovery DVDs. This recovery must be created with the factory settings and I m really wondering why you didn't create it in the Council of last following Toshiba s (the s user manual).
Now, you have two options:
# For the original Toshiba Recovery disk in order for your laptop - https://backupmedia.toshiba.eu/landing.aspx
# To install the operating system using the original installation disc of Microsoft and later install all necessary drivers, tools and utilities, moreAll of the drivers, the tools and the utilities that you can download from the Toshiba's support page - http://eu.computers.toshiba-europe.com
If you have any other questions you are welcome.
-
Satellite L500D-163 - Wireless does not
Laptop: Toshiba Satellite L500D-163 (with card wireless 802.11 b/g/n)
Router: Pirelli Discus (having support 802.11 b/g).Hello
I bought a portable Toshiba, Satellite L500D-163, two days ago.
Windows 7 and Ubuntu Linux 10.04, the Wireless does not work. It shows all the available wireless network neighborhood, including mine, but it connects to my network.
I also have an Acer laptop that connects to my network wireless without problem.
I placed the Toshiba laptop side by side with my Acer laptop and tried all the options:
802 11b, 802.11 g - WEP, WPA, WPA2
with simple passwords of the style: "00000000".and SSID wireless to the router changed something as simple as "abcde".
Computer Acer laptop connected without problem in all cases, but Toshiba didn't connect.In Windows 7, the connection information appears as connected but 'Limited' and the software Toshiba says that the laptop is not getting an IP address.
I manually entered the IP address (192.168.1.2), subnet mask (255.255.255.0) and the default gateway (192.168.1.1 router =) below the configuration in Windows 7 wireless card, but it did not work.
The laptop must support Toshiba, or y at - it an incompatibility with my router?
Thank you.
Great! Thanks for that!
-
Satellite L500D - 16L - touchpad does not work.
I have a new L500D but my touchpad does not work.
My diagnosis of computer told me that there is no problem, I have a mini mouse USB connected, would that be causing a conflict?
Can someone please give me some advice.Thank you
Try to press Fn + F9 to toggle the Touchpad. Also take a look in the BIOS, the touchpad can be disabled it. Also try to uninstall the software for your mouse USB mouse (if you have installed everything), this software can cause a conflict.
-
Re: Satellite L500D - Touchpad 'touch' does not
Hello world
tactile function of my touchpad (to emulate left-clik by tapping the touchpad) not working anymore. I can move the mouse with the pad.Also under the pad left button does not work - the right is.
I have already tried:-Update the driver
-Fn + F9
-The parameters of the touchpad - the 'touch' function is enabled
-The material Toshiba - successful testbut without success.
You don't know whether a software issue or a hardware one.
Any suggestions?I thank you,
Andres
Hello
As far as I know the option is called tap to click
You should check if it is enabled in the settings of the touchpad.> Also the under pad left button does not work - the right is.
Perhaps it has something to do with the fact that the left click by tape does not workIt is difficult to say what might cause this
As I have said; options have to be checked once more in Control Panel-> mouse-> device-> settings (or properties) settingsIf all the settings would be ok, then a touchpad hardware problem would be possible
-
Satellite L750 - 17 p does not load Windows
Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
MS-DOS screen remains empty and the computer doesn't load... could you help me?Are able to repair the system using the Windows own repair options?
I guess you are using Win 7 because this system has been pre-installed by Toshiba.
Switch on and press F8. Here, you choose the first option called fix my computer.
Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.If this option does not help, try to set the system on the last good configuration/status running
-
Satellite L655 - 14 d does not load
Hi all
My Toshiba Satellite L655 - 14 d gave me the alert battery becomes low return over six months, and until today it worked fine but now it is abruptly stopped and I noticed that the line of LED does not come with or without battery. WHST canbe likely reason... is it a power line in the failure of a circuit?
My charger and battery are fine I checked with another system of Toshiba...
Help, please
What happens when you start Notepad on mains only and turn at the time where Windows is loaded?
Battery is correctly recognized?
Battery is ON? -
Satellite A100-225 screen does not load
I have a toshiba A100-225 and whenever I start the laptop the screen will not load or show anything. Does anyone know what the problem with him?
Hi Michael,
The screen itself may be defective or the FL inverter has failed. Try to connect an external monitor to your laptop and see if you can get a good view. If the external monitor does not work then it is probably a problem with your graphics chip.
Kind regards
-
Satellite C05D-B-121 does not load
Hey so I got this laptop for Christmas and all of a sudden it won't load at all
I managed to run it once or twice but cuts shortly after with no warnings other than seemingly dead.Any help?
By "does not" do you mean problems with the AC adapter?
If the battery is not empty, the laptop must turn on without the power adapter connected.
If the battery is empty, the unit must be connected to the power supply.If your adapter is defective and the battery is empty, you wouldn't be able to turn on the unit.
There so all first if the adapter is OK or if there is some sort of dysfunction.If you are 100% sure that the AC adapter is not the troublemaker, then the problem could be bound if your motherboard or another party... but in this case, it is hard to say what role might malfunction
-
I have windows vista 64 bit, which worked well until the last windows update and now wait for 7 to 10 minutes before the commissioning is complete. I have received information from a previous question and followed the instructions to check the programs that can slow down the process. It doesn't matter what programs I have disable the startup process is still slow. I noticed that Norton anitvirus does not run on start up and shuts off when I check on the Security Center. Is this the cause of the problem - there was a conflict with the last update?
Any help would be appreciated.
Concerning
Phil
Hello
Of course it looks like software malware may be involved. The following message will be troubleshooting
methods to use if the problem persists.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
Satellite L500D - integrated webcam does not work properly
Hello world
I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.
Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...
I tried in low light and high, and the night mode is not on.
I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.
Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!
Jminiz
Hi mate
Didn t find such a problem described discussions, it seems that you are the first person who has reported this
Have you tried to reinstall the webcam software?
Try this.
First remove the software of webcam and then after new reboot, install the new downloaded webcam software.PS; have you removed the thin sheet secure the lens of the webcam?
Check it! -
Anyone else having problems with the payment information section does not load?
Im trying to put in my payment information in and it will not appear. don't think its connection. I have tried everywhere
Try a few steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-
On Satellite L500D DVD player does not work - Code 39
my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new
read here:
http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm
Maybe you are looking for
-
Recently, my PC started to boot the system & web surfing very slowly, making me suspect a virus. I found this file on my computer (dfrgsnapnt.exe) running Microsoft troubleshooting, but have not spotted on my C: drive again. Did a quick search on the
-
my media center worked fine, I added a security update, and now Media center crashes in tv mode. I uninstalled and re installed, it was delivered, so I do not have the disc. I used repair MCE, no luck, I uninstalled all my work of framework and re
-
After removing a virus, have now disappeared files in Vista
I had a rogue virus today which was a fake windows system restore. He wouldn't let my computer. I managed, or so I thought that got rid of him by performing a restore of the system to an earlier time. Well, it seems to do the trick. However; I we
-
Hi, I have a problem with the laptop.it sometimes get crashed.i have vista.how can I fix it without losing anything, programs and documents? can I use vista dvd running vista to repair without losing anything? Please answer me...
-
How to solve the startup problem
I have a few things how changed so that now when I start every program wants to start using Word. Restore things to normal