Problems of noise at iso 100

Similar Questions

• How can I set the camera at 1/125, F11, ISO 100?

  Hello

  Please, someone tell me how can I set my Canon Rebel T5 at 1/125, F11 and ISO 100?

  I tried a lot of things with no success... I can always change 2 settings, but never a 3rd.

  Please help me!

  Thanks in advance

  If the mode dial is set to "M", then you should be able to set one of these three values for everything you want.

• Qosmio G40 - problem with the use of 100% of the CPU

  In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670𞻎

  Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.

  "After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »

  Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.

  I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964

  I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)

  One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.

  Does anyone have a conclusion?

  Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
  Have you tested how the laptop works after removing the NIS?

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Many problems with the Camileo X 100

  I have a Camileo X 100 (nice and fantastic image quality) and the files are not edit from any conversion or editing software, I tried several times with all software codec
  My PC configuration is:

  Win VISTA Home Premium SP2 32 bits, ACER 9420 17 ", Intel Core 2 CPU T5500, 1.66 GHz, RAM 2 GB, 160 GB HARD drive, NVIDIA G... eForce Go 7300, K-Lite Codec Pack 5.8.3, etc..).
  0 is sufficient or not, for family movies to watch on DIVX player (on Plasma 42 '' HD Ready TV)?

  Issues related to the:
  1. How can I manage these files?
  2. I to convert before (but without the quality loss)?
  3 Please someone explain 'step by step' what I need to do (and with what software) to make simple movies (divx), without quality loss?
  4. when I connect my X 100 to the TV and I watch a movie, always remain above a boring bunch of icon that it does not disappear. Is only my X 100 or other people has the same problem?
  5. I have a lot of problem also with remote control, it's very crazy (bad firmware, zoom not working,...)?
  6 is it better me to return the camera, or these problems have all and that they can be resolved?
  7. is there someone who does not have problems with x 100? How is possible?
  8. when Toshiba updates the firmware?

  There are too many insects (ALL IS SLOW AND UNSTABLE).
  Only ARCSoft (software bundle) works, but it is not good (cheap).
  Please answer me all 9 questions.
  Sorry for my English (I prefer Italian).

  Thanks for the help.
  Antony

  0 configuration is fine, although I would not use Vista, but it's personal preference.
  1. the files can be managed without conversion with any video editing program, for example, Sony Vegas, Nero Vision, etc.
  2 - 3.Conversion is necessary to be able to view the DIVX player, as AVCHD is not supported usually. Unless you have a Blu - ray player. If you have one, you can prepare a BR disc on computer time, if you have a BR player that can burn discs BR. In this case the conversion will be done, but quality will remain. You can not divx without loss of quality. It is impossible.
  4. annoying iis band always on the screen, you cannot delete it.
  5. the remote control works well, with the only problem I've found, described in I opened. Zoom does not work? You mean during playback? It only works when you save.
  6. it of your decision if you return the camera or not. I think that for this price it is very good. Get you one, where there is no such problems for the triple price.
  7.i have a single problem (remote) with it, but at the moment I can live with, that I made my compromise.
  8 Toshiba support is terrible. I can not even a phone number or e-mail address in Hungary for Toshiba to support. The Web page for support is source of confusing and if you search for TV, you're not among the many companies, that takes the car from these products. Ridiculous. I don't know if they will update the firmware, I'm curious too.

  Good luck.

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• problem of noise/alert iOS 9.2.1

  Since the iOS 9.2.1 update I do not get sound notifications for text or iMessage

  Similar problem with the phone application.  I've just updated to iOS 9.2.1 on my iPhone 6 more (June 2015).  When placing or receiving a call to or from another iPhone (iPhone 5, pre - 9.2.1), I hear nothing, and the other party can't hear me either.  On two calls to land lines, the other party and I could hear only a few bits of noise here and there.  Apple, please fix this now!

• Problem of noise with signal analog mV

  Hi all
  This is the first time I read an analog signal with LabView, so I'm sorry for the little knowledge I have.
  I'm reading an analog voltage between 20 mV and 200mV signal (proportional to temperature 1mV = 1 degree Celsius and given out by a thermometer) with a NI DAQ Device(NI USB 6009) (I have connected my signal to the Al0 + / entries). I use LabView to get the signal of the device of data acquisition. My problem is that my signal is very noisy. I get the noise on the scale of 10 mV. If I have this noisy signal on average more than 2 s, I get a smooth temperature without noise curve. My question is if there is something I can do to reduce this noise in the first place?
  I googled this problem widely but could not find me a solution.
  I'd be really grateful for the suggestions!
  Julia

  There are DAQ cards that have a lower battery life.  I try to get a DAQ with a range that makes sense for your measure.  If you measure a max 75mV signal, try to find a DAQ, which has a range of 100mV.  But that's just a rule of thumb.

  There are other possible tips to lower your noise level, depending on how your hardware is set up.  But that would take a lot of information to diagnose.

• Windows Vista Home Premium update problem step 3 of 3-100% complete

  My Windows Vista Home Premium began the automatic update, reached the point of view "Configuring updates: stage 3 of 3-100% complete.". Do not turn off your computer. »

  Now he's just running for hours with this screen showing...

  I can't say if this update will end finally alone, or if there is a problem and I should just reboot.

  How long should I wait before abandoning me and shut down the computer?

  Thank you.

  Hi JIB1955,

  Thank you for visiting the forums of answers.microsoft.com.

  It's been a while, we can think that the update is stuck and will not continue any further.  You can press Ctrl, Alt & Del and open Task Manager.  You should see the update on the Application tab, and you can select it and press end task.
  Click on the start ORB > Control Panel > programs and features, on the left, select view installed updates and see if the update that was being Setup finished installing.  If it does not have and does not appear on the list, you can restart your computer and try to install the update mode without failure.
  
  To do this, restart your pc and even if your pc is booting press the key F8 on your keyboard to enter the Advanced Boot Options menu.  On the Advanced Boot Options menu, select Safe Mode and press ENTER.
  Your computer will boot mode safe by using only the basic drivers and services, hopefully allowing Windows Update to complete the installation of the update, you are having problems with.
  
  Please let us know if you make any progress this way

  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• Problem with Creative speakers D-100 via bluetooth to a laptop

  My son got a new D-100 for Christmas Creative wireless speaker to work with his laptop computer, as well as a mini Belkin bluetooth adapter. The drivers have been installed and the speaker rises as a helmet of blue tooth in the devices list is that part of the problem - if the cottage as a speaker?). However, when it connect to i-tunes music still plays through the laptop instead of the speaker. How do we get the speaker on his laptop?

  Hello

  ·         Did you try the device on another computer and check if it works?

  .         What operating system do you use?

  First try the following basic troubleshooting steps. They can solve your problem quickly.

  (a) If your Bluetooth device uses batteries, make sure that your batteries are charged.

  (b) If your Bluetooth device uses a transceiver that connects to your computer via a USB port, try connecting the transmitter/receiver to another USB port on your computer.

  (c) if there are several Bluetooth devices connected to your computer, temporarily remove the devices you want to solve not. If there are other USB devices, try to remove all USB devices that you do not have to be installed during the troubleshooting process. If you have several devices that are connected using USB, this can interfere with a Bluetooth transmitter/receiver.

  (d) check that the Bluetooth device that you want to solve is turned on and that it is enabled.

  Also read these articles and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Also, consult the troubleshooting steps on the site of creative support of this link and check if it helps:

  set of VARIABLES is CategoryID:4

• sensitivity Microsoft lifechat lx-3000 too high (problem of noise cancellation)

  I bought a Microsoft LifeChat lx-3000 microphone a few months before and never found out how to reduce the sensitivity of my microphone. In a conversation with my friends, they pretend to hear a lot of noise and it's almost quiet in my house. How can I solve the very high sensitivity to a sensitivity much more low where they can ONLY hear me when I talk?

  Thank you for taking the time to look at my problem!

  EDIT: Seems to be more of a noise canceling the problem rather than sensitivity, if that helps at all.

  Hello

  1. do you have the latest version of the software installed for the device?

  2. have you checked the problem on another computer?

  Please see the post below with a similar issue and possible fix where the Original partial confirmed that worked for him:

  http://social.answers.Microsoft.com/forums/en/w7music/thread/1dc68875-9022-47bd-aad1-cf9b5ac449e9

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• A lot of problems to make the ISO from Microsoft

  Hi all!

  I have so many problems trying to get an ISO of Microsoft.com. Sorry for the post on the problems of site here, but the site was so bad, that it was the only place that I could think to actually submit the problem.

  Purpose: Download clean/self/authentic/official ISO of Windows 7 Home Premium x 64.

  I have the license key (HP OEM sticker and the internal license key, I found in the registry).

  Expected solution: http://www.microsoft.com/en-us/software-recovery.

  I have the OEM entry license and tells me to contact my manufacturer of the software. HP simply redirects to an old Microsoft link to download the ISO. The link goes down, and I get redirected to http://www.microsoft.com/en-us/software-recovery. Cycle with no end, no solution.

  I enter the license key that I find in my registry. I get an error of 715-123130 system (I think simply means denied license) and asks me to go to the Microsoft Support contact page we.

  EXPECTED support: https://support.microsoft.com/ContactUs

  I chose the configuration and Installation support. I select Windows as my product and Windows 7 as my version. "Sorry, the page you requested is not available."

  I choose technical support. I select Windows as my product and Windows 7 as my version. "Sorry, the page you requested is not available."

  How can I get a clean/self/authentic/official ISO of Windows 7 Home Premium x 64 with my HP Windows 7 Home Premium x 64 legitimate license?

  Thank you

  Rex

  Rex

  Microsoft has changed the way to get the ISO and you must contact the manufacturer of the computer for all OEMS.  Your key is legitimate but OEM.  OEM means original OEM.  This is where you need to get the ISO.  HP will provide you with a dvd for a minimal cost, but your best bet is to CALL them not to try and work through the maze online.

• Battery problem. How to reach 100% battery?

  Seem to be able to have 100% battery power, have message when click on the battery icon of "battery 50% available (plugged in, does not support).»   How to reach 100% battery?

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem seeing the images at 100% zoom level in Photoshop CC

  When I see images in Photoshop CC with no color profile, at the level of 100% zoom, the image looks like this:
  

  But the picture still comes out as it should. Like this one:
  

  So the problem is when viewing on Photoshop.
  I can't say for sure, but I think it happens even in the other levels of zoom.
  Is there a simple solution? If not, then how can I reset defaults PSCC?

  Note: click on the pictures to see their original size!

  Post edited by: WilliamTael Ryuzaki

  I solved it!
  The problem was caused by a setting in the NVIDIA Control Panel.
  If you set 3D NVIDIA settings to activate the FXAA (or anything else that is not by default),
  even if check you "let the application decide' after, Photoshop uses the FXAA and zoom the images to 100% level fuzzy search.

  So, put everything by default on the NVIDIA Control Panel, and it solved the problem.
  Thank you all!

• iPhone 6 ear problem the noise I hear is very low

  MY mobile is iPhone 6 128 GB wi

  I have a problem with the ear sound I hear is very low and I can't control from the bottom side