Windows Vista Home Premium update problem step 3 of 3-100% complete

Similar Questions

• Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

  Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8.   All the downloaded slowly.   Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update.   When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours.   It reads "Configuring updates: stage 3 of 3, 0% complete.  The percentage of nevers turns off 0%.   I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option.   He immediately went the same configuration screen.  I left it again for 4 hours, but no change.   What should I do?

  The laptop is a HP tablet PC.

  Here's how to uninstall the ones you don't want.

  And how to change the settings of update and IE8 HIDE update!

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista home premium :(activation problem

  I have an acer aspire 6920 and im having a slight problem with activation windows.i installed vista Home premium and used magic jellybean to try to find my code of activation but it keeps saying that it will not be activated. the key on my sticker under partially missing, I can't see the first 4 digits of it:(toute aide serait appréciée.)

  Hello

  Key Finder programs will not help you with non-enabled operating system preinstalled

  If your computer is pre-installed with Vista Acer use the recovery of manufacturing process ' e to reinstall Vista

  a your share product key entry is normally not necessary when reinstalling vista like that

  Contact Acer and buy recovery disks (see link below)

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  or at startup, press Alt + F10 to start recovery process to factory settings

  _____________________________________________________________________

  and for any other problems you might have, here is a link to the Acer Support

  http://support.Acer.com/us/en/default.aspx

• Windows 7 Home Premium update problems

  Dears Helpers

  About 6 months ago I bought a Samsung series 7 times. It came with windows 7 Home Premium.  When I bought the laptop, the seller told me that Windows has come with the ability to reformat itself in windows 7 again.

  The time has come to do and I checked out, but it turns outt hat it was only Samsungs Sste recovery. He had done an image and revenue to whom. Ok.

  After doing this, I went to the windows update, but it will not work. It just stays at the helm of 'Check updates' and after a long so that it says that it cannot be updated.

  Through the windows, I managed to download the "update Windows diagnosis", and having run it he managed to solve some of the problems that we found. I tried several times since then to update the windows but get the same problem again. Keep hecking for updates, it doesn't do anything.

  Could someone help me please. Normally I would just leave, but I would like to have updated and also because I recently bought a program that requires the .NET Framework Client Profile to run. The program itself provides the instalation but it will not be installed. I downloaded on the windows site, the .NET Framework Client Profile to try and install them separately, but that no longer works.

  Did I miss something or something goes wrong?

  I would be very happy for any help on this matter.

  Concerning

  R

  PS just one last question. This window comes with the ability to reformat itself?

  OK, please install KB3020369 first. Then try again.

  https://support.Microsoft.com/en-us/KB/3020369

  Best regards, VZ :)

• Windows Vista (Home Premium) - updated this a blank page

  Hello

  I have 3 PC who exhibit the same problem. When I go to Windows Update, the window frame is displayed, but no information is displayed in it. The tank is completely empty and cannot be closed without ending the application in the Task Manager. To end the application in the Task Manager, the PC shows that expplorer of windows has stopped working and must be restarted.

  Any help how to solve this problem would be appreciated as all machines must be updated to SP2.

  I am also running ZoneAlarm Internet Security. Information about the recent updates that can cause this problem, if it is known would also be appreciated.

  Thanks, Jeff

  No ZA Internet Security is installed on all affected systems 3 and the issue occurred before it is installed?

  See: some Windows Vista functions may not work, or Windows Vista may stop responding

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows Vista home Premium update error

  I continually get an error Code 80080005 when you try to update windows. How can I go about fixing of this please?

  Hi lepaknitram,

  Thank you for using Microsoft Vista answers Forum.

  Try the steps mentioned below:

  * Copy / paste commands in a Notepad and save the file as "Resolution.bat" on your desktop below.
  Run the file to run the commands.

  ipconfig/flushdns
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv
  D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  rmdir /s /q %windir%\system32\catroot2
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  output

  * After the execution of commands, try to perform a Windows Update, if you are still having the same problem, then:

  First, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  * Check if Windows Firewall is blocking the update of Windows.

  * I suggest you to disable Norton and Windows Defender as well, because sometimes there are opportunities to Windows Defender blocks the Windows updates.

  Please see the following article for connection errors:
  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with Windows Vista Home Premium SP2 do not update, will be upgraded to Windows 7 fix this?

  I have Windows Vista Home Premium SP 2 with 32-bit.   I have problems with the download of updates and with it closing.  I want to know if I upgrade to Windows 7 If this will fix my problem.  If so, where do I need to buy. Thank you

  Hello

  upgrading operating system does not always solve the problems.

  You can take the problems with you

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  and include the kb numbers update and error codes

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  For more information windows 7

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Windows 7 forums

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Why Windows Vista Home Premium 32-bit installs not Windows updates?

  I am not able to download and install Windows Vista Home Premium 32 bit windows update.  This Gateway laptop has always been able to quickly and easily install the update by clicking windows update.  However, since the introduction of Windows 10 it has been a lot of your time trying to install updates.  I had this same problem with Windows 7 too.  Never before there was no problem for the two operating systems.  Installation of Windows updates has always been easy and fast without any problem.  Running the troubleshooting isn't good and hunting error codes has been unproductive.  What the hell is happening?

  Hi Joe Cool1:

  'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems.  The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

  There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista.  The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

  You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. Or running fixit is. How updated?

  I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?

  Hi Vishal,

  1. what happens when you try to install Windows Update and the fix, you get any error message or error code?

  2 have you made changes on the computer before this problem?

  3 is the limited issue during the installation of specific updates?

  Problem when installing windows update, see the following Microsoft article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  
  Notes:

  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Windows Vista Home Premium - problem "task manager has been disabled by your administrator".

  Nice day

  I had problems with my task manager (I use the operating system "Windows Vista Home Premium"). Evertime I try to access the program, he returns with "task manager has been disabled by your administrator". I used different tools to remove malware and got rid of a lot of problems but still can not in Task Manager.

  I created a new user with administrator account and logged on it and had no problem until my 'Task Manager' program open, but when I went back to my origional administrator account the same problem occurred.

  Why can I get to "Task Manager" in my new account administrator and not the former?
  I still have malware in the old account or do I go into my registry and restore something?

  I am at a loss, and any help would be appreciated. I'm worried that I can always have some kind of malware that prevents me to access my task manager in my old account.

  Please give step by step instructions because I am not computer savvy computer even when it comes to fixing the problems of this kind.

  Thanks in advance.

  Hello

  What antivirus/antispyware/security products are in use and which have ALREADY been on your machine
  even if you have uninstalled them?

  Never put any Parental controls?

  Start - type in the search box-> COMMAND - find top - CLICK RIGHT to it - RUN AS ADMIN

  Copy and paste in the command prompt - press enter

  Tracking Add HKCU/v DisableTaskMgr /t REG_DWORD

  OR

  Start - type in the search box-> Regedit - find top - make a RIGHT CLIC top - RUN AS ADMIN

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion-Policies\ system

  Look in the right-hand panel and delete the value named DisableTaskMgr
  Right-click on it and delete

  Close Regedit
  Rob - bicycle - Mark Twain said it is good.

• I tried twice to install the KB2754670 update every time install failed with the error code 646 can help? I have Windows Vista Home Premium edition

  Update Windows cannot install KB2754670 twice showed error code 646. Can someone help? I am running Windows Vista Home Premium edition.

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  UTC/GMT is 01:26 Sunday, October 21, 2012

• I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

  I use Windows Vista Home Premium 32 - bit SP2.

  Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

  I just installed hotfix for Windows (KB947821).

  It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

  Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

  Help?

  Hi Jeffrey,.

  It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723