Problems of scathing of the things on the LAN

Similar Questions

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• "We have problems to connect to the download server.

  I tried to download any type of update of Skype from my Skype upward and itself deleted my Windows 10 for no reason. Whenever I have try and install the program Skype, after clicking on the first two buttons of installation for preparation, I get this message: 'we have problems to connect to the download server. The only option is to 'download' again. And continues to be the same thing. What is happening and how to fix this?

  Try this download link (currently Skype version 7.16.32.102)

  http://www.Skype.com/go/getskype-MSI

• M45 S351 problems with scrolling using the touchpad

  I have some problems with scrolling with the touchpad. In some applications, like Mozilla Thunderbird, the touchpad scrolling does not at all! If I contact the right side of the touchpad by finger in Thunderbird, I see the label of Scroll on the screen, but no scrolling occurs. What is the problem? In Opera, I need to click on the browser page to 'activate' the touchpad scrolling and it also irritates cause in IE I do not have such problems: I have lunch just Explorer and scrolling of the works from the beginning... How to solve this problem?

  [Edited by: admin on August 29, 2006 06:52]

  Fix for that is unknown to me, but it turns out that the unit has been tested only with Microsoft products (Designed for Microsoft WXP label applied on the device) and not with other third-party software of the part. This function is not only an example. There are many of them. Please don t see this as a problem.

  On this path, I will not say that you MUST use just preinstalled stuff but there are many things that you have to live with.

  Perhaps someone else knows more about it.

  Good bye

• Problem of closing on the Satellite A100-906

  Hello.
  I use a Satellite A100-906. The problem is the thing began to close when starting hot (and NOT too hot, too, paying all in 35 minutes of play or so!)
  Can anyone help?

  Thanks in advance

  SARP

  According to the description of your problem in short, there must be an overheating problem. For me, the first step is to make the laptop clean. It may be that the cooling fans are full of dust and dirt blocking the air flow. The result is material high temperature.

  Or, you can try to do it alone by using vacuum or pay for professional cleaning.

• Problems of Pro of the satellite with Internet browsing

  Hi all,.

  Have very recently acquired a * Satellite Pro L670-18F * Windows 7Pro OS. Also have an ASUS while a 802.11nWireless ADSL 2 / 2 + HomeGateway. Home PC is running VISTA Home and another laptop is running XP. Can connect to all computers on the network icon however can only browse the internet on the laptop XP and VISTA PC older. Satellite Pro running Windows 7 detects ' the computer is configured correctly, but the device or resource (web proxy) is not responding "when you use the Network Diagnostics. Have tried many things, connected by LAN cable, did not work. Reset ASUS still the same problem. * Get a little confused and annoyed.*
  * Any help would be appreciated.*

  Stand by.

  Is the feature WLAN on your Satellite Pro OK or not?
  Can you connect your laptop directly to the router and use the WIFI with no problems?
  I just want to know if you have any problem with the functionality of the laptop or you want to discuss some of the parameters which are not so important for the WLAN on your Satellite Pro feature.

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• problem of visarc in the source distribution

  I am trying to build a distribution from source to a project in LabVIEW 8.6.1.  I need to build the source distribution so that I can password protect all VI in the project (about 1200).  When I try to compile the source distribution I get the following error message.

  

  As you can see the source file does not exist because the path: C:\Documents and Settings\Program NIUninstaller Instruments... does not exist.  So, I created this path and place the visarc file where LabVIEW thinks it should be.  When I Isaiah to compile the source with the wrong path distribution I get the following error message:

  

  Once more the following path does not exist: Program Files: \Nationa lnstruments\LabVIEW 8.6...

  I don't know how to create this way false because he seems to treat the program as its own hard drive files.

  The next thing I did was reinstall DAQmx 8.9 as the name of the file is visarc, I don't know that it is connected to DAQmx but the visarc makes me think it might be.  DAQmx reinstalling does not fix this error.

  I should also add that I was able to build a very good three weeks ago source distribution.  During the last three weeks the code was treated by myself and two other developers.  I had seen problems with other developers link dll from their office of vi in the library, and when I pulled it back on my machine, I have been unable to build a source distribution, because their DLLs have been at a different path.  I solved this problem of rebind each Subvi to the dll in the correct path.  Could be a similar problem where one of the other developers visarc stored in C:\Documents and Settins\Program files... and I just need to recreate a link to the visarc file?  I don't think so because I don't think "recreate a link to the visarc file" is since then.  I'm open to any feedback.

  Thank you!

  Here is a solution provided by an EA:

  Hi Jon,

  The following information should help you to resolve the error you see

  LabVIEW VIs point to the rc files that are not in the vi.lib.  This means if you move the VI on disk (upward in a folder, in a folder, another drive), then the path that he stored in the rc (relative path) is no longer correct.  The application builder will recognize that the rc file will have two different routes (the one which is correct and which is not).
  Once two different paths are recognized source distributions will not be built successfully.  To correct this problem, follow these steps:
  1. If you have any previous version of LabVIEW installed temporarily
  Rename the folders of their resources.  Directories of resources can be in the labview\resource directory.
  2. Add massCompAll = True in the file LabVIEW.ini version of LabVIEW
  used.  The file is located in labview\LabVIEW.ini.  LabVIEW must be closed when you change the LabVIEW.ini file.
  3. launch LabVIEW, mass compile the project, and then try the build.
  4. exit LabVIEW and difficulty of any renamed resource records again to their
  original name.
  5. remove the massCompAll = True token in the LabVIEW.ini file once the
  compilation of mass is over.
  Note: Rename files from older versions of LabVIEW resources is critical because the token defined otherwise has a chance to cause the vi.lib of the different versions of LabVIEW to be reticulated

  Meghan
  Technical sales engineer
  National Instruments

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• Problem: Only tracks from the first album of my first artist will play

  OK, I just got the Sport Clip MP3 player this Christmas... a 'red'... holds 4 GB.
  (1000 songs). I am trying to charge about 25% as many files as one.

  This post is about my SECOND problem with this device:

  So I have a group of music CD that I recently ripped

  pieces chosen and I am now trying to load and listen to them
  on this new MP3 player.

  I ripped the tracks about 3 to 6 months, using Win - 7 and the
  Microsoft "Windows Media Player".

  [I copied MP3 files of your sample provided by the player on my laptop
  (for analysis and guard) and then delete those files from the
  drive... they resided in the "Music" folder it. ]

  Then, as I did with SUCCESS for my old small MP3 player
  (called an 'Eclipse'), I just did a GUI-copy (by press Ctrl-A)
  series of directories and then "glued" (with Ctrl-V key) those in
  now empty the folder of music on the MP3 player. It took everything a
  While (he said 287 files have been copied) and they pass got there very well.

  OK, but now only the files of the alphabettically artist-FIRST,.
  that is to say Bob Dylan tunes, seem to play! However, I checked all the others
  files of 8 or 10 artists are also residents.

  Photo of Bob Dylan from the (first) album cover look fine (this magic
  worked)... to see the photo album and titles appear very well in the
  small graphics window.

  But I can't navigate to a subfolder of the records of any other artist so everything that
  I listen to are the tracks from the first album of Bob Dylan (for example 5 songs)!

  [These exact steps works very well on my plu 'Eclipse' $20 $ MP3 player.]

  So, any ideas on what could be "broken"? This product is ready for
  Prime time? (I think I saw an ad for it on your site, dated from)
  11 months ago... February, 2014). I just bought this thing
  before beginning last December, 2014 at BestBuy.

  All ideas welcome. Help, please!

  TIA...

  OK, what I said in the previous answer, while true, is NOT what the problem was.

  The problem was that the unit do NOT have the latest firmware in there!

  We have that probably all assume that a device purchased just before Christmas (approximately one month)

  would have the latest firmware in it.  But who are not necessarily the case.

  The last/most recent firmware RIGHT NOW (in January 2015) is version 1.22.

  So I would advise anyone who purchases the Sport Clip to CHECK and see what it

  review is currently in the unit, and if it's less than that, your FIRST step

  is to update!

  To check this, simply navigate to 'Settings' > 'System Settings' > 'Info' and examine

  the number of 'Version '.  (Think I have this right.!)

  Once updated, now when you load your music files, you have the best chance all

  will work as it is supposed to.  [I said 'best chance' because there may be still other bugs.]

  ===========

  My proof of this:

  (1) Firstly, I attached the MP3 player to my computer and DELETED all the

  songs that I had loaded into his 'Music' folder

  (2) then, I followed the procedure to update the firmware, as shown on this Web site.

  (3) Finally, I topped up my MP3 files, still in their 'sub-repertoire-tree' format, in

  the 'Music' of the device file, exactly as I had done earlier.

  Yes, everything works NOW as expected... I can now listen to every album of

  all the artists.

  Hope this helps someone else who has had problems!

• At startup, My Documents opens without be clicked. I heard that there is a registry problem. I tried the fix in the registry and it has not worked. Can you help me?

  A few days ago, I noticed my Documents open when running on my Windows Vista computer. I did a few Google searches hoping to find some sort of answer. I saw that XP had the same problem and noticed that the solution for XP was the same thing as Vista, I found the answer for my system.

  I tried two fixes registry and again, in vain. Now my Documents appears more than ever. I tried to scan for viruses and malware, and nothing came. I have read that I need to do a system restore, and I would try to avoid that if possible.

  Even as I type this, My Documents is popping up on the taskbar. It's really starting to annoy me and I want a solution for this.

  Help!

  Hello

  This looks like some third-party software or service that runs in the background is causing this problem. Try to perform the clean boot and check if there is no application of third party behind this question.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Also run a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning
  Anthony.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium