Problems of transition from 3.51 to 4.0.1

Similar Questions

• Transition from XP to Windows 7, can't locate the little information?

  I'm not very savvy of computer programming. As indicated, I have Windows XP 2002, service pack 3. Follow the instructions in Microsoft XP to find the number of "bits: under the property system.» Unable to find these.

  Also, should I move from XP to 7?

  * original title - change from XP to Windows 7?  XP version 2002, Service Park 3. Cannot find info.* bits

  You probably have XP 32 bit, namely:

  If your computer is running Windows XP, follow these steps:

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

  Installation custom own steps

  Time to use:
  Or the transition from XP to 7, not supported in place upgrade paths (ex: Vista Home Pro 7)
  A Windows system to 32 bit on a 64 bit system, or change the language
  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation do you want?" click "Custom (advanced)." Note: 32 to 64-bit requires restart and boot from the DVD.
    
  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Anyone else having problems updating apps from the app store?

  Anyone else having problems updating apps from the app store?

  I have the problem. I'm running on iOS 9.3.2... I have 29 apps waiting for update, but its not updated. No matter what fix on this yet?

• Have a problem receiving attachments from emails on my iPad.

  Original title: emails with attachments

  Pls help.

  I have a problem receiving attachments from emails on my iPad.

  for example, all the letters I get schools, I don't have the option anywhere to open an attachment, which is usually a form I need to sign and return to school.

  I am able to receive attachments on my work PC and my computer laptop but.

  I look forward to your reply

  concerning

  Vanessa

  Hello

  You must check with your email provider and iPad Support:

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a problem with hotmail from microsoft, they have blocked my hotmail a/c, saying that unusual activy was noted.

  How is that ms send me texts, but I never freceive them

  I have a problem with hotmail from microsoft, they have blocked my hotmail a/c, saying that unusual activy was noted.

  1} I have not myself sent messages in my sent mail, I spoke to microsoft, their response was ok reset your passsword we will send you a code to your mobile phone that write you it in the box that allows you to reset your password.

  {my mobile is a nokia model last slidder 2220 series and receive sms and text 2} microsoft has the correct number then why I do not receive the code of

  Microsoft?

  help please

  Hotmail is part of Windows Live takes Center.

  Your account has been blocked because you have somehow (according to Hotmail) violated the agreements of the end user.

  Post here or in the Microsoft forums will help you.

  You deal personally with Hotmail.

  Here are 2 links that you use...

  1. the present link tells you what you need to do. It is not a Q & A. Some instructions:

  Your account has been temporarily blocked:

  http://windowslivehelp.com/solution.aspx?SolutionID=f172cbee-3c73-4506-8a1d-4e6e82adb846

  2. this link is for you to ask questions.

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Don't waste your time here. Stay in Hotmail forums.

• Why the transition from the server causes error?

  I reported the error to the it Department, they respond as indicated below:

  "These errors are the result of a transition from server we are currently experiencing. As soon as the server transition is complete errors should stop. »

  «The transition of the server error has to do with displacement of the IP4 to IP6.» All pages work technically, but if you happen be routed through IP6 instead of the IP4, some of our pages will not appear due to firewall issues. »

  Does anyone have suggestions on what causes the error of IP4 to IP6?

  Thanks in advance for your suggestions

  -----------------------------------------------------------------------------------------------------------------

  Detailed description on the report of mail as shown below:

  Referring to the following link, some images cannot be display on 29 October.

  http://I1093.Photobucket.com/albums/i438/junk000/Error2.jpg 
   
   
  The other day, when I try to click on the following link and open it using IE8, the response is slow and getting the error on
  "Web Page error: 502 Bad Gateway!" with frontispiece USGS URL resolution error
  Please see the link for more information.

  http://I1093.Photobucket.com/albums/i438/junk000/error-6.jpg

  Do server not able to response to the loading of the web?  Is there anything to improve his performance on the server?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.

• The transition from the bridge of one payment to another

  Hello

  We have a customer who currently treat offline credit card transactions that that they have their payment gateway set to 'process (process manually via the existing installation) offline '.

  Now, they want to put in place a bridge of the National Australia Bank (NAB).

  Could someone provide suggestions as to how it would approach the transition from the bridge of one payment to another whereas BC only allows gateway to a payment to be selected at a time?  In other words:

  1. Is it possible that the existing offline payment gateway and the new NAB gateway can coexist so that we could go through a test phase without interrupting the continuity of the customer with the treatment of existing credit offline transactions?
  2. Or do we have to "cut" their existing sales process until the new payment gateway is fully configured and tested?

  Any comments would be much appreciated.

  Gavin

  It is not that much work to spend from OFFLINE to NAB TRANSACT

  I'm not sure, that you need to worry too much on the implementation and testing before to cut more (unless you have a really high turnover store and you want to be careful)

  Perhaps you could watch you log in to your partner portal and reproducing the SITE you want to configure on (if you have an exact dupe). Then you can go about your tests on THIS site and get all tested and functional then cut on the settings when you are happy

  Good luck

  [email protected]

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• Is there a way to make transitions from State/animations of a States - button for example fl.control?

  Is there a way to make transitions from State/animations of a States - button for example fl.control?

  All I can do now is to change the structure of the skin and that's it, I can't do an animation between States as I can with Flash Builder skins. So is it possible to do so, any technique or I need to create a button from scratch?

  Thank you!

  simplebuttons have properties upState, etc., that you can use to assign some movieclips to the 3 States.  You can use the property movieclps currentFrame (seem to) smooth the transition from one State to another.

• Transition from FCP to the body - Command Ctrl-v

  Hey guys,.

  I'm transition from FCP to the body, and a shortcut that I use quite often is CTRL-V. This razor-cutting blades clamp/clips selected in the exact frame where the time indicator is seated. Is there a similar shortcut for the body? I know I can hit the key Cut and then click on where I want to make a cut, but it would be much easier to just hit a shortcut key and cut exactly on the frame without having to guess if the razor tool is on the correct framework.

  CS5.5 - OS X 10.6.8

  Cmd / Ctrl + K

  -Jeff

• Problems of the transition from Captivate 5 to 8

  Hi all

  I have just bought/installed 8 Captivate and Captivate 5 files conversion am projects. It's the first question that I've met and it's quite strange:

  When I saw the project (using the options to preview Captivate [e.g., project, from this slide, then 5 slides]), the preview window appears and displays the slide in view of increased zoom so high I have to expand the window and change the resolution on my desktop to display an overview of all in one or two screens... (see screenshot below of the original preview window that displays; it shows only the top left 1/4 of the slide). The current draft resolution is set to 992 x 674 (don't ask why), but even if I have re-resize-width 800 and leave the aspect ratio, the same, it still presents in preview with this view of high zoom. I can't zoom in or out in this preview window.

  When I view in browser or publish the project and display the SWF resulting, it displays normally as before in Captivate 5.

  

  Someone knows how to fix this?

  Thank you!

  Kate

  Hello

  Is the same thing occurs if you create a new project? Maybe it's just a problem with the upgrade project.

  If this also occurs when you create a new project, perhaps it has something to do with the settings on your computer.

  See you soon... Rick

• Can you help me please with problems! Transitions/crossfade

  Good day, I have a problem hard.

  Titles are registered, synchronized, and doubled.

  Now to my problem... Again have completely copy and paste at the end of this Arregment.

  It works as all except the darn crossfade / transitions are no longer present.

  How can I solve this problem?

  I am grateful for each tip/trick.

  (Adobe Audition 3.0)

  Ah, I see your problem. Unfortunately normal copy / paste does not work as you want it to AA3. But there is a way to do it. Make sure that all the clips you want to copy on the track are selected. Then holding down shift right click any where on the track and the cursor will change from the head of the white arrow normal to a black man with a small icon below a curved arrow. You can then drag the slider, with a copy of all the clamps and the bland Crusaders, to another track or at the end of the same track where there is no audio.

  Hope that helps.

• Transition from timeline menu

  There seems to be a lot of sites (including Adobe) on the internet that show / tell how to create transitions of menu using Adobe After Effects. It is to have a smooth transition to form the menu for video when you press a button in the menu. For example, a button that says 'Play Movie' that is linked to a chapter on the video time line.

  I created a movie 'Burn' as stated in tutorial Adobe posted on the internet on the Adobe site. The 'Transition' shows that the disappering from menu to a black screen for at least one second, then the projection of 'Transition' (which is the menu burn like a 8mm film that stuck).

  I don't know whether it is a problem of BD. But for the creation of comics, even if a 'Transition' is created, it is really without any transition. On BD, any time that a menu ends, it is a black screen for about 1 to 2 seconds before everything after he plays. The "Composition" (transition) that you create (and I created) is just something that the bound menu button to when the button is pressed.

  He denies totally the function / performance of a real transition. It is exactly the same as seen in the preview AND a burned BD disked played on a set-top player BD and played on an HD screen).

  It's like a Lamborgini $500,000.00, paint job perfect except for a scratch at the back to the front key, it really ruins the product.

  Is it a hardware problem which is not surmountable? or is there a way to solve it?

  Sincerely

  Apple escapee

  Please do not mention me After Effects, it's where I came from.

  Yes, a problem of BD or, more exactly, is how even "manipulates" a comic book project.

  I'm afraid that this problem is caused by still not programming not well how the first part of the menu links with each other.

  I experienced the same problems with point of loop buttons.

  In fact, no way out. Sincerely I wait still CS6 (crossing fingers).

  A DVD project works without problem.

  Ciao.

  Giorgio

• Effect of movement not executed on the transition from State

  I have the following problem using view States, of transitions and the effect of movement

  I have a component panel and States state1 and state2.

  Panel is included in state1 but not in state2.

  When view state is changed from state1 to state2 I want to animate the front panel is removed.

  However, if I put a motion effect in my state of transition that it never runs because the Panel is removed before the effect plays.

  The only solution I found was to add a fade transition effect. This prevents the Panel to detach and the effect of movement is plays correctly.

  What continues? Is there a documentation explaining this? This could be a bug?

  Here is a sample application to demonstrate the problem. Panel1 has the problem and workaround Panel2.

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "xmlns:s ="library://ns.adobe.com/flex/spark" "

  xmlns:MX = "library://ns.adobe.com/flex/halo" >

  < s: states >

  < name s: State = "state1" / >

  < name s: State = 'state2' / >

  < / s: states >

  < s:Group >

  < s:Panel id = "panel1" y = "0" y.state2 = "100" title = "Group 1" includeIn = "state1" / > "

  < s:Panel id = "panel2" x = "150" y = "0" y.state2 = "100" title = "Group 2" includeIn = "state1" / > "

  < s:Button left = "300" label = "toggleState" click = "currentState = currentState == 'state1'? 'state2':"state1"" / > "

  < / s:Group >

  < s:transitions >

  < s:Transition fromState = toState 'state1' = 'state2' >

  < s:Parallel >

  <!-strange! 1 Panel is removed before the effect of movement time->

  < s:Move target = yTo "{panel1}" = "100" / >

  <!-the workarount. With a mannequin fade effect panel2 stays visible and move effect is executed->

  < s:Move target = yTo "{panel2}" = "100" / >

  < s: bland target = alphaTo "{panel2}" = "1" / >

  < / s:Parallel >

  < / s:Transition >

  < / s:transitions >

  < / s:Application >

  What is happening here is the Panel is removed from the DisplayList at the beginning of the transition before the passage has a chance to occur.  This happens by default unless someone tells the transition to remove the item at another time.

  There is a special logic built into bland who knows when an element is removed from the DisplayList so that he knows to say the transition to weaken the element before removing it.  This is why the workaround you mentioned works for your case.

  You will notice that if you use:

  
  

  The target fades out as long as his movement before retiring from the DisplayList.

  Normally, in this situation the transition must know when to remove the item from the DisplayList and you can tell him that using the RemoveAction tag, for example:

  http://ns.Adobe.com/MXML/2009"xmlns:s ="library://ns.adobe.com/flex/spark">
     
         
         
     
     
     

  
         
     
     
     
     
     
         
             
                 
                 
             
         
     
  

  Note that in this transition, I use a sequence and put the RemoveAction after the move, so the transition knows to move the item before removing it.

  By the way, thanks for the great code example!  When posting code on here is compile concise, complete, and I can quickly copy and paste into Flash Builder, I'm much more likely to focus on the issue.