Problems of unit change
Hello, how can I do to change the number corresponding to the unit changed in the table?
For example, when I change the unit of 'flow' to be L/h, the value should appear 4 240 in the course of data without altering the value manually. It should appear automatically. I know how to change the unit, but do not know how to appear in the course of data with the same block of digital control.
DOH!
Tags: NI Software
Similar Questions
-
I want to buy CC but can´t in my country (Uruguay), have problems if I change my country?
Hello
Cloud creative teams is available from dealers in Uruguay.
Thank you
Bev
-
I had a big problem because I changed my Id and Passwoerd.
I changed my Apple Id and password. And it was done correctly and got check on my e mail. But my problem is created when I use on my other iPad mini iPad iPhone s6 son more and 6s iPhone and my wife iPad it keep showing the former I got and accept the new password ok. And it keeps coming back every time and after he says that the password is incorrect.
I am now in deilimma and I changed the password today to overcome this problem and it still shows my old I would like to, but he accepts the new password.
I need assistance on how the new that I could be seen on all devices? Without message "password incorrect or defective.
TAlal
ID bought/downloaded content using a Apple cannot be merged or transferred to a different Apple ID.
Content/App is for always linked to the Apple ID used to obtain them.
-
Problems of the change of password for my iMac
I'm finishing the change of password for my iMac in early 2014 running on the latest version of El Capitan.
When the opening up of the procedure is finished, I get a message in the upper right of the home screen of the iMac. The message says that I need to enter my new password to complete the amendment of the code of procedure. I can either click on "enter new password" or "delete" message. I tried to click on the two, but nothing happens except the message disappears.
It's all quite strange that I have to use the new password to open the iMac for use and it recognizes the new password, if I try to change the password once more.
Can someone tell what I am doing wrong or where I need to enter the password to complete the password change procedure. Thank you!
This problem has not yet someone can help please?
-
Problem with the change in value of listbox event
Hello
I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.
You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).
You must use a unique event structure managing all events.
The overall program architecture looks like inside-out for me.
For the buttosn, you must use action lock (switch not release!) and use the value changed events.
-
Resolution of problem - unable to change to a lower resolution
original title: resolution of problem, please help!
The resolution on my monitor, I cannot go smaller. I can't move the resolution bar upwards or downwards
and I am unable to change the screen type in the "display properties" under my control panel. Nothing I
seems to fix the problem!
Can anyone help?
Thank you
Hello
- Create a restore http://support.microsoft.com/kb/948247 point
- Start the PC in safe mode - F8 struck twice a second immediately after the ignition until you get a menu b & w, select Safe Mode from this menu. Don't worry strange messages or the appearance of the screen when he finally gets to the opening scene of session.
- Log on as an administrative user - use admin if that is presented as a possibility
- Click Start, click Run, type devmgmt.msc and press enter
- Expand the display of the maps section by clicking on the +.
- Right-click on any graphics contained therein and uninstall them
- Restart the computer and wait that all devices to be detected again, select OK to all the prompts that appear, select automatic search if this option appears
- Don't worry about the appearance of your screen immediately, once that all the material was again detected and installed, restart the PC again
- Try to make the resolution changes after the second reboot
If this messes up your PC use the restore point created in the first step to get things back the way they were http://support.microsoft.com/kb/306084
After return if problems persist with details for further assitance.
Tricky
-
How fix a freezing problem after having changed a bad battery?
My battery was unable to hold a charge, so I ordered a new one. After I replaced it, whenever I'm using my computer, it warms quickly (especially when I open an application) and the power runs about an hour. In addition, the entire system freezes randomly and I need either hold the power button to stop it or to let the power run out. When I reboot it, it shows "a disc should be checked for consistency. I have tried to install updates, removing unused applications and defraging the HDD.
It is a big problem since I use this computer for work and need it to be upward and running smoothly as soon as possible.
Help, please!Hello
This could be a hardware problem caused by the battery, the charger/adapter a/c, or in the computer.
Check with a real computer store (one that makes its own service internal leeks, not tip)
at a Best Buy or other department stores) or system manufacturer support.-----------------------------------------------------------------------------------------------------------------------------------
Methods to troubleshoot a software training (which can also help determine the possible causes of material).
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I changed Windows XP to Windows 7 Home Version 3SP. Both my DVD-Rom are not recognized by Windows. A check in the Device Manager reports that both drivers are up-to-date. I ran each anvenue in windows and the manufacturer's Web pages. Now, I hope you can help?
What can I do?
Hi stoertebecker,.
Thanks for the reply.
Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
BlackBerry Passport wifi connection problem after password change
I changed the password on a Wi - Fi device and since then could not connect my passport to this access point. Have you tried the wps process also without success.
Thought maybe I could delete the old profile registered, restart and after finding the unit once again, perhaps that would accept the new password.
I don't see how to remove the original profile. When trying to update the password, get a message that the profile cannot be added.
Click on the link below to delete the backup Wifi network on your Passport.
http://help.BlackBerry.com/en/BlackBerry-Passport-series/current/help/mes1334606818545.html
Good luck!
-
Problem with the change of location of the folder on the desktop (Windows 7)
Hi all, I have windows 7 Home Premium and changed my location on the desktop of \desktop c:\users\ (user) on my drive d: since my c: drive was getting full (for that I click with the right button on the back of my office and I changed my location). However, the system has simply dumped all my files and Office files in the root directory d:\, without creating a new folder on the desktop, which is what I thought was going to happen.
To resolve this problem, I want to transfer all my files + folders office to a dedicated folder d:\desktop but found I can't since now there is now no desktop as folder! (catch-22). I entered the \links c:\users\ (user) file and changed the objective of the Office in d:\desktop instead of d:\, but it has no effect! My office target is always the root directory. How can I change this? I hope you can help! DavidGo to libraries, do a right click on desktop, cut, and then paste it on the other drive. The wonders of windows 7 will automatically record anything he puts on the desktop for now :)
-
Problem with the change of payment details
Hello
I tried many times to update my credit card payment information, but I can't change the 'old'.
I still got the message "there is a problem with the information of card entered here. Please enter another card or contact your bank. »
The card is newly issued and is on the name of my company. I paid her for other accounts online without a hitch, then there is no problem on my side.
I use a Mac and Google Chrome.
Is it possible for me to provide details by e-mail and make the change?
I await your response and thank you in advance,
Cristina
This is an open forum, not Adobe support... Click below to contact Adobe staff for help
While the forums are open 24/7 you can't contact Adobe support at any time
Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
What I am doing wrong?
I created a small example of how to test the functionality of substitution of variables within the unit test framework.
Documentation: SQL Developer: unit tests
create or replace procedure SimpleTestProcedure (param1 in varchar2) as
Start
null;
end SimpleTestProcedure;
/
Test configuration with the following configuration:
Input value: Test
Process: Boolean function
declare
Param varchar2 (4 char);
Start
param: =: param1;
If "{param1}"! = param then
Returns false;
end if;
end;
Is found in the following message is displayed after the test run:
I use SQL Developer Version 4.0.3.16.
Any help would be appreciated!
Kind regards.
Hi Flofe,
It looks like the Boolean function as a validation of process takes no parameters that a function pl/sql 'generic' put... it's probably called "function" only because it returns a value, as does any function. But you can use substitutions of setting the parameters for the stored procedure that you are testing, which you are already doing.
So, try to change your code to:
declare
Param varchar2 (8);
Start
param: = "{param1}";
If "{param1}"! = param then
Returns false;
on the other
Returns true;
end if;
end;
And it should work for try you the little test...
I hope this helps...
Val
-
PMT_000008 error, when I'm trying to change the method of payment. Help, please! Cookies are cleaned, tried different browsers. It does not help.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Problem with the change of a 'State' the substitution of one break of the chronology of the objects
Here is my setup: I have a single slide for learning select 9 melodies 'text buttons' to view 9 different definitions. To do this, I set myself to each buttons to change the "State" of the original image for the introduction of a 'legend of text' containing the definition of that label of buttons. I also three navigation buttons (output, back and next; button_19 _20 & _21) with breaks built into the end of the timeline. coinciding with the end of the audio narration for this slide.
Here's my problem: the calendar runs and stops as it should until the learner chooses one of the 'text' buttons after that the timeline is suspended; how it seems to send a command to "continue" and substitutes at the break, and brings the learner to the next slide.
This has something to do with the function "States"? I used to do exactly the same thing in Cap 7 with stocks advanced without any problem.
Thanks in advance for the help.
v/r
Jay
If it's 9 Captivate, locate the box continue a project of play in the Actions section and deselect buttons for each.
-
Problem when I change the foreground and background colors.
When I try to change the color of first plan or background (or reverse) appears an error window: "Could not complete your request because of a program error."
Hi Rodrigo Pinto Hoffmann,
Sorry for the problems with Photoshop.
Try resetting the PS preferences
- To restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.
Concerning
Rohit
Maybe you are looking for
-
Compensation of façade earlier before displaying a new.
Hello My problem is the compensation the old façade. What I have is a VI with a CONFIG button. When the user press the front button config # 2 appears. There is a button NEXT on Panel #2. When you press the NEXT Panel before #3 button is displayed. T
-
How to convert string data from the serial port to double?
Hello! I am very new in LabView and attempt to read data from an OHAUS pioneer pa-313 electronic scale via RS232 serial port. I use the VISA. I can read the data and see it as a string to the screen, but when I try to convert it to a double, it is ju
-
x 200 (74542GU) restore partition and recovery media creation
Hi, I confused! My new x 200 came with xp was preinstalled and with the DVD of restoration vista buisness. If I use the recovery partition now (before I approached the vista dvd), what version of windows will install the recovery partition? And if I
-
I get my E-mail bounced back to me with this message 554 refused. How should I do?
554 refused I get my E-mail bounced back to me with this message 554 refused [5c1bd7f4.0.1814788.00 - 1823.2720654.p02c12m066.mxlogic .net] (Mode: normal) how should I do?
-
Why can I not use ready boost with flash player in my home premiun wvista?
Why can I not use ready boost with flash player in my home premiun wvista?