Problems using slideshow widget-sharing widgets

Similar Questions

• Problems using the widget sharing jquery slider.

  Sorry for getting back so soon with slide show another problem, but I have another site that needs a slider.  It is the cycle of jquery from the widget Exchange http://jquery.malsup.com/cycle/ I have it on http://carpetcleaningatascadero.com/index.html shows the style and images.  Then I did just a drag and drop of the plugin without modification on http://carpetcleanigatascadero.com/testcarpet.html shows the movement but none style or images. 

  You are amazing, I promise one day I will get it down to were I'm not here every day.

  Solved, had two selected effects that play well with each other. When in doubt delete things until it works.

• Problem inserting video inside the slideshow widget

  Hello

  I am trying to add a YouTube inside the Lightbox widget. I tried using the social/youbube widget and using the iFrame of the youtube video code and placing it inside the slideshow widget.

  I followed an older tutorial online, but I can't make this work using Muse CC.

  What I want to do is to create a small button, which in this case would be a small point instead of the thumbnail, and then once clicked on a video would be open.

  If anyone can help solve me this problem I would be grateful.

  Thank you

  1. Select the widget to the basic Composition. (see attachment)

  2. make sure that "hide all first" is checked (change other options such as contour fill etc..)

  3. Select the YouTube widget and drag it to the Inbox of basic Composition. See attachment (outline of the box will highlight in blue to indicate that the widget is inside)

  4. make sure that 'Auto Play' is checked in the options of YouTube.

  

• Miniature free-form in slideshow widgets... they are all scaling both

  Hi all

  I design a site in Muse and trouble with the slideshow widgets. I want to use them for multiple photos to create a viewer, but they have different sizes for thumbnails. When you turn on the option of free-form, he is still all thumbnails at the same time. A way around this problem?

  Equipped with:

  Adobe Muse CC 2015.0.2.4

  OS X 10.9.5

  Mac Pro early 2014

  Thank you!

  Hello

  This is a default behavior of the miniatures in slide show. In your case I advise you to use Lightbox appear under compositions.

  Use the trigger as a thumbnail and objectives for the design of the light therapy device.

  Note: This widget do not give you the ability to add images as a slideshow, you design each trigger and target individually.

  Kind regards

  Vivek

• My slideshow widget is stuck in loading position.

  Hello

  So I downloaded firstly my site on http://debijlgolf.businesscatalyst.com/frankrijk.html and the slideshow on the page widget works perfectly.

  But now that I downloaded from the Web site of final destination, http://www.debijlgolf.nl/frankrijk.html, the fair slideshow widget keeps showing me the loading thing.

  As far as I know that the source code for the two pages is the same (I also didn't change anything since Uploader on BusinessCatalyst), so no one knows what might be the problem?

  Thank you very much!

  Okay, the image may not load.

  iThink the problem is the name of file with spaces.

  British Colombia has no problem with them and that your server is...  Just a guess

  http://debijlgolf.BusinessCatalyst.com/images/Saint%20junien%205.jpg

  http://www.debijlgolf.nl/images/Saint%20junien%205.jpg

  You must remove the spaces of your original file names...

  It is known to cause problems in some cases

  Don't use spaces

  Most of the operating systems can handle documents with spaces in the name of the file without problem, but it is not a good idea for the documents on the Web page. The problem is that when a URL is usually displayed with an underline. And a lot of people interpret a space as being the underscore instead character and therefore cannot access your page. In addition, in order to use a space in a file name or URL, many browsers require that this space be coded- as a sign more or 20%.

  Hope this helps

• How to put a contact form in a lightbox slideshow widget...

  I would like to put a contact form in a lightbox (slideshow) widget. Is this possible?

  I also want to add text to the place where in the thumbnail image that must be clicked to reveal the lightbox with the contact in her form. Is this possible?

  If possible, how?

  noelb8402969 wrote:

  I would like to put a contact form in a lightbox (slideshow) widget. Is this possible?

  None

  noelb8402969 wrote:

  I also want to add text to the place where in the thumbnail image that must be clicked to reveal the lightbox with the contact in her form. Is this possible?

  You can have the text but not for this widget

  noelb8402969 wrote:

  How can I do?

  use the widget to display lightbox... Place the shape inside the target (in blue in this example page) = Homepage

  

• Why can I embed html not in a Muse slideshow widget?

  I have a widget slideshow in place and when I download the video html (click on the image in the slide show, object, inserting html) he puts the video in a separate box that is unrelated to the slide show. I can get the video with a widget of composition, but I need to use a slideshow widget. Site is here:Main_Mltipages and the video must be added to the main show.

  Hello

  You cannot insert Embedded codes in the slideshow widgets.

  If you want to replace the images with the integrated HTML video, please use the Composition of presentation and place them in the target.

  You can find a object > insert Widget > publication > presentation

  Concerning

  Vivek

• Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Hi connally25,

  Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/

  If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:

  Facebook follow Widget does not

  Concerning

  Sonam

• Why are there (but not all) of my Muse slideshow widget images turned out differently when I've retouched in Photoshop CC?

  I have a few dozen photographs embedded in the slideshow widget. Most of them seem exactly as I've retouched in Photoshop, but several appear rotated clockwise 90 or 180 degrees. No one knows why this is happening, and ideally, how can I solve this problem? Thank you.

  

  

  Please share the url of the site, also refer to this post and check if that helps:

  Why do some of my images matter upside?

  Second, if you change the type of fill so - what makes the difference?

  Thank you

  Sanjit

• Problems with video widget in Muse

  Hi all

  I'm wandering if someone can help me!

  I have been using Muse to design my first website, for my part and was lucky to fall on this 'background video Widget"created by HelloNoam. I tried to implement on my single page site. A single page website of scrolling is obviously not a drawing that you would normally use the widget background for, however, in principle, it works well by putting the widget on a layer below all other Web site content. I have, however, two problems with the site.

  It is a prototype of the Web site without the video widget and as you can see there is a grey white space on the third "page where the video will appear:

  http://www.dominicsimmons.co.UK/nowidget/nowidget.html

  This is the website with the widget (the video may take a while to load one used is large enough, it could be shortened to end use):

  http://www.dominicsimmons.co.UK/widget/widget.html

  The first problem is that when the widget is placed on the page, for some reason any that it will create an additional section at the bottom of the page about the size of a footer (although there is no current footer). There is no explanation for what I can see, and this happens only when the widget is used. As far as I know, this happens in all types of browser.

  The second problem seems to be isolated to when using Safari. When the widget is used, the first 'page' loads but then "pages" later (other than the video page) are white and are displaced. Again I am lost as to why this would be and why it would occur only in Safari and only when the widget is used.

  I talked to Abhishek on the Adobe Live Chat and he advised me to create a new thread here describing the problem. I hope that someone will be able to help/identify the problem because I'm lost as to what is wrong and have little or no experience coding (thus why I use Muse)! It is the only big problem I'm facing and for being a filmmaker, and I want to implement a video design beautiful.

  Many thanks in advance,

  Dominic

  Muse is not video well at all.  Muse is very good at putting up a site of very fast and professional quality with items correctly created, but without video.  Do not use the SWF of Muse recommended files as half of your audience can see your stuff. This is because the HTML 5 is the only way to make it universally visible devices by all static and mobile and more than half of the population now discovers the internet through a mobile device. Learn dreamweaver or other to do it correctly. To bad that Muse could be great if Adobe all down here bits and added the video correctly. Even through code Muse does not well at all. I guess it must be purposely because no company in their right mind would destroy their own potential software without a valid reason.

  Well Adobe?

• Jpg in the slideshow widget is converted to PNG

  I'm setting up a slide show to a series of JPG files that I don't want to NOT resized or altered in any way during the export.  If I PLACE a JPG image in a page, add a shadow and then export, I always get the JPG original and shadow is handled by CSS.  So far so good.  However, when I install a slideshow (with a picture frame that is larger than any of the incoming images so that no resizing of the image occurs), then add a shadow on the picture frame, then export, I get PNG files instead of the original JPG files .

  This is not good, since the PNG files are MUCH more important.  I do not understand why MUSE is inconsistent here... it seems to me that if the PLACE can result in the shadow is handled by CSS, so why not in the slide show?

  Is it possible to have a shadow (via CSS) in a slideshow widget and also export the JPG of origin instead of a PNG file?

  When a picture does not fill it is not the whole framework, the region, which it does not is considered to be transparent. In the current implementation of Muse, Muse no particular case a rectangular opaque region (which may cast a shadow using a CSS shadow) and a non-rectangular (which can not throw the correct shadow systematically in all popular browsers using CSS). So Muse converts the image into a PNG image to add the drop shadow.

  Call it a bug, a limitation or simply something that we have not learned to yet, but if the rectangle containing the images of bits is smaller than the frame it is displayed in, when a shadow is cast it true by converting the bits in PNG and adding shadow (even if in the case of image pieces rectangular simple CSS drop shadow would work and be preferable).

• Problems with the Widgets Library / Compositions / presentation / Auto Play.

  I have a problem of failure when using the widget "Overview."

  The widget within the group is "Composition".

  With 'Auto Play' on...

  If I make a shortcut (button) to any element in the light table or use the options of 'Parts', 'Prev' or 'Next', continues to work option 'Auto Play '.

  I can only access other areas by direct click, it stops the 'Auto Play'.

  Can you help me solve this problem?

  Thank you very much!

  Hello

  Please take a look at this related post: http://forums.adobe.com/message/5551810#5551810

  See you soon

  Parikshit

• After Update February 2013, removing the last picture of Adobe on the slideshow widget standard?

  After Update February 2013, I can't delete the last picture from Adobe on the slideshow widget standard more? Anyone has any idea how?

  I think you are referring to the third stock photo in a slideshow of base that you are unable to delete since the upgrade to 4.0?

  If this is the case, try to browse to the image by clicking on the ">" (next) link mode creation; Select the image of hero and press DELETE to remove completely the third remove the slide show. You can also double-click the hero image to select the particular picture and press DELETE that would make the third blank slide and you should be able to place a new image.

  If the above does not help, try reseating the basic slideshow widget or use the blank slide show which does not contain images of the reserve.

  Thank you

  Vinayak

• Creating message from Inbox by using the widget

  Hello

  It is possible to create a message in the Inbox of main messages using Blackberry widgets?

  Thank you.

  bert2002

  We do have a list of Message of JavaScript API.  You would have to wrap the existing Java API and use it in your widget.

  It is one of the API on the road map, but just, we have not been able to get it out on the market yet.

• is an HTTP Post possible using webworks/widget SDK or what I should use Java widget?

  Hi all

  I use webworks and widget SDK to make a simple application where I need to do the following

  (1) open a site called www.mytest.com

  (2) display the following parameters with the request to open the site

  Login = true

  UserID = one

  password = b

  Is this possible using BlackBerry Widget SDK? I looked at the blackberry.invoke.BrowserArguments and I do not think that it allows that.

   

  Is this a limitation to the use of webworks? If so, that is the only alternative is to develop a widget of java and use the browser2 field?

   

  Thank you

  Parag

  Yes, you can...

  When you make an Ajax request, on your call to the open() of XMLHttpRequest objects method use the following:

  XMLHTTP. Send ('post', URL, true);

  XMLHTTP. Send (post_string);

  WHERE

  'post': your request method

  URL: the url to which the http request you

  true: to make it asynchronous (Note: this is the default behavior)

  post_string: is a urlencoded string containing all your post variables and their values like this

  "xc =" + encodeURI (element.value) + '& xd =' + encodeURI (element2.value)...

  You should be fine here as long as you know how to create an XMLHttpRequest object and can use GET, this should be familiar.