Problems using the widget sharing jquery slider.

Similar Questions

• Problems using slideshow widget-sharing widgets

  I'm having a problem with the site that I am building right now, for some reason, whenever I do drag and drop widgets slideshow of the Exchange, they will not work. I get the message that the JS files are missing.  I've never had this problem with any of my other sites and I was wondering if someone had noticed? I need to set sort the folder that contains the js? I doubt that I've never done this before, but who knows.

  It boils down to something that could have gone wrong.

  What FTP you are using to transfer your files to your server?

  You can try this:

  Go to the Upload Mode in your FTP program, and check if it shows "ASCII" or "Auto". If it is showing one of these, change it to "binary". Who can solve the problem for you. If your FTP writes on the server, the ASCII mode for .js files, this sometimes gives questions.

  If you are not already using it, I recommend FileZilla.

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Hi connally25,

  Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/

  If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:

  Facebook follow Widget does not

  Concerning

  Sonam

• Problems with the Widgets Library / Compositions / presentation / Auto Play.

  I have a problem of failure when using the widget "Overview."

  The widget within the group is "Composition".

  With 'Auto Play' on...

  If I make a shortcut (button) to any element in the light table or use the options of 'Parts', 'Prev' or 'Next', continues to work option 'Auto Play '.

  I can only access other areas by direct click, it stops the 'Auto Play'.

  Can you help me solve this problem?

  Thank you very much!

  Hello

  Please take a look at this related post: http://forums.adobe.com/message/5551810#5551810

  See you soon

  Parikshit

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• problem with the widget form Muse cc

  When I use the widget without changing file names, I can send the form. I changed a few names, and now I can't send the form, assume there is a field not applicant, even when all the fields are "unsolicited" and mention "empty" I can't send the form. 2nd question: how to ask a few numbers in a field?

  

  The basic forms do not allow customizations such as the validation of specific entry as numbers only models. You would need a BC Pro account for that. The rest, we can't really tell without having the exact error message and the exact structure of the form. Screenshots are not much use when you do not include the properties / settings for fields.

  Mylenium

• How to use the sign ' # ' in jQuery for id?

  How to use the sign ' # ' in jQuery for id? When I try to use it as ($('#PropertyAttributeValue').css ('color', 'red') ;) I got error as follows:)

  The CFML compiler treated:

  • An expression that starts at line 64, column 37.
    The expression might be missing an end #, for example, #expr instead of #expr #.
  • The body of a beginning of tag cfoutput on line 19, column 18.

  Use the two hashes to escape the first:

  ($('##PropertyAttributeValue').css ('color', 'red') ;))

• Problems using the tools of accessibility on PDF interactive with complex tables and fields in form (in AcroDC)

  Hello

  Although I worked earlier in the accessibility check (will be abbreviated as "axs" later) before using the Checker axs documents, what he used Windows and Acrobat XI a year ago. I am now responsible for creating interactive forms that are available on a Mac (platform I prefer), that have been designed only visually in InDesign, then transferred in Acrobat X or XI where someone placed the form fields and then handed to me to settle the tab for end-users order and make them accessible to people with disabilities (Government org). Problem is, some of these documents are extremely dense arrays, in which each cell of the table is a checkbox or a radio button I have several questions:

  (1) the order of reading has something to do with the tab order? (I spent hours to get the tab order works the way it should and do not know if by clicking any axs tool that will change and cancel all my work.)

  (2) I need to mark an entire page, more or less, as a table but when I am in reading of editing tool (TURO), I get the crosshairs of hanging around that object, but when I go to playback control panel, and then click Table, everything is deselected and nothing else happens. My goal is to get to the table to label the lines headings and column editor, etc. What is going on? What I have to do all this in the Panel tags instead?

  (3) in the Panel tags, I see a table with 30 lines, which is what I have visually, but when I select the TRs and TDs nothing gets selected on the form, so I don't know how to get the content of the form "in" these TDs... it is a very complicated document and I'm getting confused. " Not a lot of experts out there on Axs AND Acrobat DC dealing with this and I'm frustrated! There's a guy on Lynda.com including videos watched re: similar topics, but in his case, he got a table which is just text and it is small, and his method is by selecting each cell of the table with the cross and he the tags labeling a 'cell', and then go in the Panel and work on the appropriate type / # Table elements slide autour stuff in the appropriate lines etc. My picture has lines 30 and 13 columns, and approaching the fields of interactive form in most of the cells... This is not practical, but do not know if there is a quick/accurate way to get the table recognized otherwise?

  Any help is appreciated...

  Sorry,

  Very frustrated

  Yes, treating large complex tables can be the chore of accessibility PDF much time and frustrating. First question - these tables of data or layout tables? Several forms are organized visually using layout tables, but do not really present data organized in rows and columns. Marking this content in a table would be run against failure condition Matterhorn Protocol 15-004, "content is marked as a table of information that is not organized in rows and columns. Instead, work in the Tags pane, drag all the elements of content out of the structure of the table and re-tag/organize according to the needs. The Suite of PDF/UA reference has an example of form (document 10) that you can refer to-although its layout tables is relatively low. A simple structure, detroit forward should be easier to fix at a large table and also easier for a user to read assistive technology.

  However, if these are legitimate data tables... I find the reading pane to be worse than useless. The Tags pane sets the reading order for assistive technology. Something that I find useful is to break down a complex table into manageable pieces, clean up the subtables can recombine. You can also consider assessing NetCentric CommonLook - I do not use it, but it has a good reputation for working with arrays. I don't think it's available for Mac, however.

• How can I use the widget panel Accordion with a footer?

  Hello

  My question is can be unclear. So I'll be more specific. I use a menu to my Web site with the Accordion Panel widget. The menu works fine and when I open it, it pushes the elements on the pages below.

  My problem is with the footer. Because, when the elements below the widgets are pushed, they go under the foot of page and the footer is not pressed.

  Is it possible to pushed the foot of page when I use the Accordion widget? I don t want to ride it.

  You have "sticky footer" checked in the Site Properties box.

• Problems using the iPad Pro notes app

  I have a new iPad Pro (IOS 9.2), but the notes app doesn't seem to work properly with a pencil. There is no line doodle icon and I can't write with a pencil. Can I use the pencil to 'click' on the functions as "BOLD" and new, but not as a pencil. Someone at - it experience with this and how can I solve this problem?

  Have you updated the Notes app in the app itself.

• Equium L40 problems using the recovery disk

  Hello

  I wonder if anyone can help me?

  I want to restore my computer but when I put the recovery disk in I select the cd/dvd rom drive by pressing f12 at startup.
  I also maintained pressed C when I lit. I select the disc I want to start the computer, it goes to a black screen, then it loads just windows up as usual.

  I phoned with Toshiba for help and all they could tell me was that as another drive worked on my computer, it isn't a problem with the disk drive, but a problem with the disc and it will cost me 30 quid for a new!

  Is anyone able to give me any help

  Thank you

  Hello

  If I understand your message, you are not able to recover the laptop using the Toshiba disc. Is this good?

  Well, in your case I recommend to start from another original Windows XP CD bootable disc or Vista DVD or a Linux drive to test if the CD/DVD drive can handle this drive.

  In this case, you can test if your CD/DVD drive is faulty or if the problem is related to the Toshiba DVD recovery.

  Welcome them

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Problem using the Overdrive Media Console software program

  When I try to download audio files using the Overdrive Media Console program (used by the public library in my area) I get the error message "error) xC)) D2781: problem occurred in the identification of rights management digital retriving.»   What is the reference for this?

  Hello

  • What is the format of audio file you were trying to play?
  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11E2&ContextId=71&OriginalID=C00D2781