Problems with a document that runs after you place an inline movie
I'm trying to put an inline movie and have the content that surrounds reflow, instead when the film is placed it overlaps all the above content.
I put a movie by using the following code:
paragraph.insertionPoints[-1].place(File("c:\\users\\kurt\\desktop\\movie\\test.flv"));
And this is the resulting behavior:
The weird part is that when I tested it against blank templates, I got these results, which are what I was hoping. The paragraphs surrounding simply reflow to accommodate the film.
Any ideas on why the other document is not reinvest in the film placed?
Yes as Jongware has said that it is not question of film.
It's a question of wordwrap. You can see that just by drawing a rectangle and then cut and pasted to an inline object.
If you want to place as an inline and said Jongware, for what? You can place a change of the vertical offset according to the dimensions of the movie.
Using the format-myAnchoredObject.anchoredObjectSettings.anchorYoffset = 50;
Tags: InDesign
Similar Questions
-
Problem with Internet connection - connect only after you turn off allowing then again.
It is a recent problem that unfortunately I have very little information on. In other words, after months be happy and connection to the internet when you start the computer has decided he won't d more, instead he wants to deactivate and then activate the connection to the local network before it will connect.
There is no error message and the convenience store could not find that something wrong then directed me here! I tried to diagnose too but didn't know what was wrong either. There are two computers connected through a router and the other is fine, ISP technical support assures me it's nothing to do with them either.
It left me speechless. I tried the system restore, I crossed the two diagnoses available in internet options and I called ISP support. Although this isn't a direct threatening problem, it's one of those little niggles you want just leave.
If anyone has any ideas on how to fix things, I'd be grateful.
* Acer Revo running Win 7.
Hi tmaxwell83,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. What is the type of internet connection you use?
This would happen if the NIC driver is corrupt or needs to be updated.
I suggest that you install the updated drivers for the network adapter on the computer by visiting the network card or the computer manufacturer Web site, the check if it works fine.
Updated a hardware driver that is not working properly
Network adapter problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem with the height/width automatic after you apply the effect
Hey guys,.
I have a panel that automatically resizes after some other materials is added. All the time there are a scale effect. Whenever I move the mouse over one of these children they zoom in and there, the height and width of the parent container is resized automatically.
However, I have a button reduce to this one with a Resize effect. I can resize the full container to a size of reduction (for example 40 x 40), but when I resize returns with the same effect, the Panel doesn't do not automatically resizes with added children more.
I did not define special properties on the Board early, but a property must be different now. It is not "automatic" and the "percentageWidth/height" is not working correctly because this command will cause the Panel stretch the full scene. Any suggestions here?
Hello
What effects is usually that they value explicit width and height of an element. This means that before you minimize the container, these values are not defined. When you reduce the container, the explicitWidth and explicitHeight are set. Normally, a provision or a container will size the component with setActualSize() or setLayoutBoundsSize(). It does not lock the component in an explicit state.
Sometiems after effect of that speech.
myComponent.width = NaN; myComponent.height = NaN;
This will reset the explicit values Nan and force the component available to re-measure and setting page on based on her preferred sizes. In your case, before that happens the effect of reducing
Mike
-
VPN you have problem with ping to a server after you configure a NAT
My VPN worked very well until the Exchange Server client has added and changed my setup.
Once the customer added the Exchange Server and edited my setup, my VPN you problem.
I've corrected some but there's always a them that I can not ping to exchange the local ip address of the server (192.168.1.2).
One thing I notice, is that I can ping this IP 192.168.1.2 if I remove ' ip nat inside source static 192.168.1.2 extensible 116.xx.xx.xx.
Someone please check the configuration below and advise me.
I would be very appreciate any kind of suggestion.
Thank you.
version 15.0
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
xxxxx host name
!
boot-start-marker
boot-end-marker
!
logging buffered 51200
recording console critical
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
iomem 10 memory size
!
Crypto pki trustpoint TP-self-signed-3333835941
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3333835941
revocation checking no
rsakeypair TP-self-signed-3333835941
!
!
TP-self-signed-3333835941 crypto pki certificate chain
certificate self-signed 01
30820240 308201A 9 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 33333333 38333539 6174652D 3431301E 170 3131 30353134 30313034
35315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 33333338 65642D
33353934 3130819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
810094A 1 7C2D79CE A6BEE368 3EB0B5B7 9A2CFE42 6A 145915 E67EF01D 350558E3
040B 6379 E6360CB3 4 D 0360DA61 184225 AAB44CA5 6BE23D05 55DAA45A 4647 5 FEB
6F143346 6BF18824 EFC3A31F 2A48AD8D 524F2324 EB331E50 8407577F E751DFF2
DD926D88 25 23143 11 C 66750 68267 C 61 C38B62C4 3B16E5AE AC91B2F8 ABA3546D
02 30203 010001A 3 68306630 1 130101 FF040530 030101FF 30130603 0F060355 D
551D 1104 08466172 45617374 50301F06 23 04183016 8014E95E 03551D 0C300A82
66B6A8C2 CF1BD38F 684FD4DF C3854AEB ACA7301D 0603551D 0E041604 14E95E66
B6A8C2CF 1BD38F68 4FD4DFC3 854AEBAC A7300D06 092 HAS 8648 86F70D01 01040500
03818100 6CA43C42 F0116A56 DD0B98B9 05C3BB3C 5B39172A DF35F9B9 12F8534A
75CB8043 60BD9E0A 832ED1A5 7034E6F6 55A522E0 14FBD1E4 16C8D186 72FBAB3E
EE4C0858 C9C9B87D 0449BE9A CB71AB29 A1B0BF18 7DA6CE07 49E40F7D C 32, 66187
310AC5B1 BF8D0D67 B024AFCD 0956FB68 BC385CC1 B6406466 1C1A8AA8 EFBA279C A 546599, 5
quit smoking
no ip source route
!
!
DHCP excluded-address 192.168.1.1 IP 192.168.1.100
DHCP excluded-address IP 192.168.1.201 192.168.1.254
!
dhcp pool IP CCP-pool1
network 192.168.1.0 255.255.255.0
domain Fareastp
DNS-server 192.168.1.2 165.21.83.88
default router 192.168.1.1
!
!
no ip cef
name-server IP 192.168.1.2
name of the IP-server 165.21.83.88
No ipv6 cef
!
!
license udi pid CISCO881-K9 sn FHK142971LH
!
!
username admin privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxx
!
!
synwait-time of tcp IP 10
!
!
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto group configuration of VPN client
key xxxxxxxxx
DNS 192.168.1.2 165.21.83.88
fareastp field
pool SDM_POOL_1
ACL 101
include-local-lan
max - 20 users
netmask 255.255.255.0
!
Crypto ipsec security association idle time 3600
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
crypto dynamic-map DYNVPN 1
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
map clientmap client to authenticate crypto list ciscocp_vpn_xauth_ml_1
card crypto clientmap isakmp authorization list ciscocp_vpn_group_ml_1
client configuration address map clientmap crypto answer
clientmap card crypto 65535-isakmp dynamic ipsec DYNVPN
!
!
!
!
!
interface Loopback0
IP 192.168.250.99 255.255.255.0
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
WAN description $ ES_WAN$
IP address 119.xx.xx.xx 255.255.255.252
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
clientmap card crypto
!
interface Vlan1
LAN description
IP address 116.xx.xx.xx 255.255.255.240 secondary
IP 192.168.1.1 255.255.255.0
penetration of the IP stream
IP nat inside
IP virtual-reassembly
!
pool SDM_POOL_1 192.168.2.201 local IP 192.168.2.254
local IP POOL_2 10.10.1.2 pool 10.10.1.200
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source static tcp 192.168.1.4 16000 16000 FastEthernet4 interface
IP nat inside source static tcp 192.168.1.4 16001 interface FastEthernet4 16001
IP nat inside source static tcp 192.168.1.4 interface FastEthernet4 591 591
IP nat inside source static tcp 192.168.1.4 2399 interface FastEthernet4 2399
IP nat inside source static tcp 192.168.1.4 3306 interface FastEthernet4 3306
IP nat inside source static tcp 192.168.1.4 1433 interface FastEthernet4 1433
IP nat inside source static tcp 192.168.1.4 5353 interface FastEthernet4 5353
IP nat inside source static udp 192.168.1.4 5003 interface FastEthernet4 5003
overload of IP nat inside source list 101 interface FastEthernet4
IP nat inside source static tcp 192.168.1.2 1723 1723 interface FastEthernet4
IP nat inside source overload map route SDM_RMAP_1 interface FastEthernet4
IP nat inside source static 192.168.1.2 extensible 116.xx.xx.xx
IP route 0.0.0.0 0.0.0.0 119.xx.xx.xx
!
recording of debug trap
Note access list 101 = 22 category CCP_ACL
access-list 101 deny tcp 116.xx.xx.81 eq smtp host everything
access-list 101 deny tcp 116.xx.xx.82 eq smtp host everything
access-list 101 deny ip 192.168.1.0 0.0.0.255 192.168.2.192 0.0.0.63
access-list 101 permit ip 192.168.2.192 0.0.0.63 192.168.1.0 0.0.0.255
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 101 permit ip 192.168.2.192 0.0.0.63 host 116.12.248.82
access-list 111 allow ip 192.168.1.0 0.0.0.255 any
!
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
!
control plan
!
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
transport input telnet ssh
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
endHello
NATting is done before the encryption.
So if you want to access the server via its private IP address you must make sure you exclude the traffic to and from users VPN to be translated (route-map on the instruction of NAT is a typical way).
Otherwise move to DVTI database solution that should not be affected by this problem.
Marcin
-
Hi all. IAM using Adobe Document Cloud. After you save a PDF to that cloud, I am able to see my PC files as well with a navigation option. How to disable this? My PC files will also be available on other PCs to access with my Adobe ID? Please help me. Thanks in advance.
Hi indi68632954,
I can understand your concern & you need to worry about this, as the folders in your PC are not available on other PCs as this option is just to browse through files of the specific system you are working on as shown in the screenshot below.
Only the files that have been uploaded to the cloud of Document will be available over the Internet using Adobe Document Cloud service during authentication of your Adobe ID & password.
I hope this will answer your query.
In the case where if you have any other question please let us know, we will be happy to help you.
Kind regards
Nicos
-
How to disable programs and commissioning that run when you start Windows 7
How to disable programs and commissioning that run when you start Windows 7
Hello
References to Vista also apply to Windows 7.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns shows you the complete list of
Locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxMonitor Monitor - free - file system, registry, process, thread and
Activity of the DLL in real-time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I have problems with an action that I created.
I have problems with an action that I created. Basically, I created an action that I apply to my images to give them all the same look, but when I add this action that it always enlarges the size of the image lets say 7 MB to 100 MB is possible to decrease this without ruining the action?
Hi lukef,
It depends on what kind of changes are included in this action.
You can choose to save it to the web, if you want to save a low waist.
Kind regards
Claes
-
How do I monitor/find where is the State of my download? I don't know how long it takes or if there is a problem with the download that I can't find anything. Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder? Where can I find that when it's done download?
Could you please confirm the operating system you are using.
You can see the status of the application of CC desktop download.
The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.
Hope this will help you.
Kind regards
Hervé Khare
-
Original title: name/location of the executable that runs when you click on detect monitors?
What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?
Hello
Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.
You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/categories/It will be useful.
-
Help
After you place a disc in the computer to copy an album. By clicking on the file but I can't BURN TO DISC? copy the disc.
You again to create a playlist before you can burn.
-
Having a problem with the message that ask you if "I want to close this window.
I use a site that allows me to send cards to people. I am a member and have paid my dues. When I look at the animated map and click on continue that it does not do.
I get a message from the Internet window explore who says "I want to close this page" if I say yes, it me bumps back to the previous page and allows me to send the card, if I say no, it remains open.
What I want to do, it is to continue to write my message and then contacted the card. I do not have this problem in the past and have not been able to reach a satisfactory solution.
I opened the internet options on my internet explore and played around with some of the options in respect of the security. It doesn't seem to help.
Under Internet Options go to the Advanced tab and click the reset, it should reset all settings to factory default on your IE.
If the problem is caused by a defective setting, this will take care of him. It will remove all the addon and toolbars, if you corrupt addons, this method will also take care of it.You will have to reinstall any addon is using the Web site you visit. (but after you have reinstalled the necessary addons, you should be fine).Hasta the proxima.Thank youToday, it was a good day, I didn't have to use my AK.
-
Problem with my laptop LG KP500 after that PC has agreed for the first time.
my pc has accepted my lg kp500 mobile so that I could save the photos, but this time, when I insert the USB it won't accept more can help you please thank you
original title: problem with my cell phone after accepted pc it first time
If you connect the phone to your PC via USB cable and go...
Start / my computer... is the phone recognized with a drive letter?If_Yes_you may be able to copy and paste the pictures from there to
a folder on your hard drive. -
Problem with Apex 5.0 report with a query that runs in SQL Developer
Hello
I have a query that runs in SQL Developer without problem, but when I use it in a classic report, it displays following:
error report:
ORA-06502: PL/SQL: digital or value error: character of number conversion error
The query is:
select T1.ID_ATTACHMENT, T1.BLOB_CONTENT, T2.ATTACH_CATEGORY, T1.FILENAME, T1.ATTACHMENT_DESCRIPTION from ATTACHMENTS T1 LEFT JOIN REF_ATTACH_CATEGORIES T2 ON T1.ATTACHMENT_CATEGORY = T2.ID_ATTACH_CATEGORY WHERE T1.ID_ATTACHMENT IN (SELECT ID_ATTACHMENT FROM REL_ATTACHMENTS WHERE REL_PART_ID = 1 AND REL_ID = 64146);
And the output of SQL Developer is:
I have following Setup for the BLOB_CONTENT column in the classic report:
Any ideas what is causing this problem?
Thanks in advance,
Sergio
I don't have notes with me, but I think that the content of the blob must be selected as:
DBMS_LOB. GetLength (blob_content) as blob_content
and check that you have included the primary key in the results.
-
I use the latest version of the CC of the Illustrator. When I draw a rectangle by using the rectangle tool, I no longer seem to be able to select the corners to resize the rectangle or the cursor turns to a rotate icon when I put the mouse just outside the angle. Now I know that AI rectangles treated CC differently, with the direct rectangles and rounded corners options and the processing area opening automatically. What I was asking and hope is not the case, is if it's that costs that can go right and resize using just the mouse? I know that there is the "object > shape > Expand" option, but having to do whenever I have a rectangle is time consuming and adds and the extra step that was necessary before. I saw a tutorial on Lynda where the instructor drew a direct rectangle in CC AND was still able to resize by grabbing the handle angle «» Anyone know if it's just a setting that I need to start or something even easy, or it is done inadvertently Adobe workflow longer trying to make it easier? And Yes, I have "show encompassing" selected under VIEW.
MOD indi-go girl,
I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.
Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.
To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.
A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:
-
2 problems
1. always problems to get my printer to work after you download the compatible driver loading. I have a HP7660 and was instructed to use a driver for HP 5600. Printer still does not print.2. when I go on a website of my e-mail address, Web site opens, but if I click on a link in this site open, the connection is not open.Any suggestion would be appreciated. Thank youIn regard to # 2 have a look here.
For hyperlinks doesn't work does not (usually in email)http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049
The printer will print even a test page? Have you tried that?
HP Print doctor for help with many printing problems
I hope this helps.
Maybe you are looking for
-
Audio iPhone 7 clicks with 3.5 mm adapter
Hey guys, this is my first day with the new iphone 7. I had the version 256 GB black with Telstra. I just plugged my Bose QuietComfort headphones to the phone using the 3.5 mm provided with the phone adapter. Even before playing any music, I could he
-
I want the time on my screen.
I need to see the time and date on my screen at any time.
-
Is there a way to make the safari opens a new page every time?
Hello I'm kinda new here and I would like to ask a question. I now use an iPhone as a primary device, instead of Android. But is there a way to make the safari to remove all tabs when you close, and when you open it, it just opened a new page or a bl
-
When you perform a system recovery - it removes all partitions created?
Model number: HP Pavilion p6795Operating system: A Windows 7 Home Premium 64-bit, now Windows 8 Pro 64-bit I'm looking to do a system restore to return my system to the default settings. I usually share my records in particular, D: data separate oper
-
HelloSince the update yesterday I have more freedom to use CUDA with my Nvidia GT240.It doubled my render times and the first in general is quite slow (which is not if strange because it does not use more the GPU)Y at - it a reason for this in the up