Problems with audio/video playback and the Source window

Similar Questions

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Problem with Quicken 2012 House and the company after installation, runtime error

  I have a problem with my Quicken home and business 2012. I upgraded from 2009 to 2012 and was able to use the new version for about 1 hour, but he hung a little.  Now when I tent to access my Quicken program, I get a runtime error "program: C:\Program Files\Quicken\qw.exe ' abnormal program termination. Quicken is then stopped immediately.  I am currently running Windows XP service pack 3.  Any suggestions?

  Hi RENEE HETTERLY,.

  I suggest that you uninstall and reinstall Quicken program on the computer, check to see if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If the previous step fails, then you will need to contact Quicken support for assistance.

  http://Quicken.Intuit.com/support/Windows.jsp

• Problem with styles of framework and the paragraph of text

  I have a book with a number of documents in it. In one of the documents, there is a problem with blocks of text and paragraph styles. When I create a new text frame, text in it and apply a paragraph style, the style does not apply correctly. Elements of applied and others do not. For example, bullets and numbered lists apply but italic, and font size are not. It only happens with new blocks of text, and the oldest work very well.

  This does not happen in other documents, just one.

  The book is properly synchronized and synchronization options include all options.

  Check your panels styles, paragraph, character and the object with nothing selected. If there is an already established style name, and I think that it would be in the Panel character styles, that's your problem.

  Bob

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• Not before 1 frame with a keyboard shortcut in the Source window

  Hi, I put Shift + D for the shortcut Step Forward 1 Frame, but in the source window, it still don't know come from 5 images. The keyboard shortcut works very well in the timeline panel, but not in the source window. Is there something special that I'm missing?

  Thanks for any help!

  In preferences, in the reading pane, the value Trim rear lot 1 frame.

  

  Even though it may affect other keystrokes you've implemented.

  MtD

• Problem with audio video in the Microsoft Life cam vx5000

  I have a Microsoft lifecam vx 5000, and after installing and trying out I can't with the microphone. The camera works perfectly well and the individual with no picture speech Recorder works great. However when I record avideo, it will only save sounds in the first 7 seconds. What should I do?

  Hi, Jillian

  1. How do you save the video?

  2. use any third-party program or functionality built into the web camera to record videos?

  I suggest you reinstall the software of web cam on the computer and check if it works.

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice&type=LifeCam&SKU=RKA-00001

  File of Microsoft LifeCam Readme and troubleshooting information

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with audio video

  Hello

  Recently, I downloaded the trial version of Adobe first Pro CC.

  After recording a video with a friend I put it in the first to notice that the audio was falling behind the video. Lets say there is an explosion. You would see the explosion and then to 0. 5 seconds later you'd hear it. At the beginning of the video, it is not noticeable. But as the video goes on it is still worse and worse. This happened since I used it. My friend helped me with setting but it didn't help. When I recorded a 2 and a half minute video, that the audio would be nice, as soon as I record a video of 10-30 m audio falls behind. My friend suspected it could be the transmission speed of the audio. I changed my microphone, headphones and the setting sequence in the first 16-bit 480000Hz, that didn't fix it. When I discovered the original video in windows media player, it is fine. The video is recorded at 1080 p 60 fps.

  Don't forget I use that first for a week or so and only know the basics. My friend has it on his mac book and has not had any problems with it.

  I use windows 8, first is up-to-date.

  Any help is appreciated.

  Audio desynchronization means that the file has variable framerate (no flow)
  Check the file with MediaInfo Windows

  If so convert the constant framerate before importing it with HandBrake

• Problems with 4 videos k form the Dji Phantom 3 Professional

  Hello everyone

  I filmed a few k of 4 videos with my Dji Phantom 3 Professional and wanted to edit with Premiere elements 14. My problem is that in the preview window filmclips stutter and stop all the time. Anyone have any advice for me?

  Thanks in advance

  Niklas

  Hello ATR

  My camera is shooting video with 30 frames per second.

  Unfortunately, nothing changes if I restore the file.
  I use a .mov file and I have installed the latest version of QuickTime player 7. I don't have the problem of the preview when I look at the video after the export.

  Thanks for your response!

  Niklas

• Problem with preview videos.  And a second question

  I use CS4.  So, I had this program in the last week and have worked on some of the stuff for learning it.  I save most of my images in HD.  When you view fottage in the Source drive is fine, but when I use the preview player, one to the far right by default, the video is choppy and crashes, pretty sure it's just using a little too much my resources currently, I don't care to see the video player overview in HD, what can I do to make the preview Player use less resources but still keep my videos in HD format so that when I export they are still in 720 p or 480 p.  I know it is related to the creation of a new sequence, but cannot understand what setting I should change and what.

  Second, sometimes I am only able to record streak in 480 p due to various reasons, I have the ability to record in 720 p, most of the time, the problem is when I have a project that involves the two resolutions.  I see only 4 options, 1 save things 720 p to 480 p when the project involves 480 p, 2 to scale the video 480 p up to "720" (and yes I know it's not ideal, but for my projects, this can actually work), 3 Add the 480 p images in and it just has to be smaller than the 720 p images and last 2 different videos for the 720 to 480, and do my 2 video parts.  Y at - it an option that I missed?  I don't think I can have the range by this exact video, file sequences?

  Thanks in advance.

  I'm glad you saw the red line. Pressing Enter will make your Timeline. It can be limited using the WAB (work area bar), in the same area of the timeline. It has a little "hook" at each end, and you can drag to limit the WAB. I use this a lot when I am Keyframing animation and want to only return a small area. [Note: the WAB can also limit exports too.]

  Is there a way I can make sure that the sequence matches the video, that I am importing?

  If you build the images, the best way to get a complete determination of its properties, is to note the settings of the camera. If you didn't shoot the images, then the utility freeware, G-Spot, will give you all the information. If necessary, you can make a preselection of (customized) Desktop for your sequence to match your footage. Say that your film was 640 x 320 @ 25 fps. You can set these parameters in your sequence of office settings. You want to match your project/sequence of your film. If you need a different size for the output, do you this in Adobe Media Encoder (AME).

  Good luck

  Hunt

• Problem with directinput in dxdiag and the launch of the games

  I recently started having problems with launch of some games.  Two games, at present, are 'Black hawk down' and 'Dead space '.  When I run Dxdiag I get a direct entry access error.  If I click on 'no' in the pop-up window that dxdiag errors access to direct entry, my dxdiag crashes with report error to microsoft.  I think the two are connected.  I have reinstalled/updated all the drivers of sound, graphics and system nothing helps.  When I try to do the webinstall of directx, I get the message that it has not updated.  All devices works fine.

  Any help would be appreciated and thanks in advance for any help offered.

  Lee

  Home Win XP - SP3 - completely up to date, Phenom II x 4 3.1 GHz, 4 GB ram, radeon hd5670 1 GB, onboard sound.

  Managed to find out what was causing the problem.  I have a USB stick electric meter reader.  It blocks somehow the directinput do some games unplayable and the origin of the problem of dxdiag.  If anyone has a similar problem then I suggest to each of your devices USB, one at a time, unplug and see if the problem goes away. If you think that my answers are useful please vote and mark as a possible answer. Thank you.

• Problem with DW CC 20141 and the BC add on

  Hi all

  I had this problem on my computers that I have Dreamweaver CC 20141 installed on both.

  I used the program for a while, but all of a sudden on open it I am unable to connect to Vancouver to download a new site and start working on it using Site/site management in the top menu.

  Instead I get redirected to a page to download the BC add on. When I connect to download it, I said I already have and not give me a link to download.

  Measures to address this are:

  1. conclusion of DW

  2. go to Creative Cloud (figure 8) and open it.

  3 make sure you sync files option is enabled

  4. download the Add on Manager.

  5. start add on Manager and make the round in circles for some time using add it manager to uninstall, and the Web page to download the app to BC to uninstall and reinstall the application.

  6. start and leave off DW while doing these steps (sorry, I couldn't work on a logical sequence of things to do in steps 5 and 6)

  7. Finally, DW CC 20141 will BC app and you will be able to connect to BC and download site you want to work on

  However once this is done, when I worked in CC DW the preview for the template I worked on had an error 404 for the model, so I couldn't split view in DW how looked at the page on the site.

  If I had to go back to Adobe Creative Cloud app and disable the synchronization of file to see how the page is in split view.

  I think that there is something wrong with DW CC 20141 and synchronization of files in the Adobe Creative Cloud application.

  Hello

  In case you still experience this issue, please try some suggestions mentioned here,

  Re: Business Catalyst Extension does not not since upgrade

• Problem with my Sansa plu and the switching of computers?

  I have a Sandisk Sansa clip plus 8 GB. Recently, I switched from windows to Ubuntu, and even if the player is filled with music, the (MSC mode) folder is empty on the computer! I guess that's because I used windows/windows media player and MTP mode. When I transfer new music, it normally appears on the player and the computer. But the old music normally played on the player - seems to have gone on the computer.what can do about it?

  Thank you

  I guess that's the issue of the MSC/MTP mode:

  When the drive is connected to your computer using the USB MSC (the value of the player in settings/USB mode), your computer only sees the files that had been moved to the drive when the drive is connected in MSC mode.  Similarly with regard to the MTP mode.  However, all the files appear and can be played on your player, under some USB mode setting.

  A reason why some people prefer to set the USB Mode on their player to MSC or MTP: setting Auto, the Player tries to connect in MTP mode but then you will return in MSC mode if the connection of the MTP does not; as a result, you can have a mixture of MSC and MTP mode transferred the files to your drive, making some of them isn't visible on your computer without going to the other USB mode.

  Because MSC mode is more universal (playing with a wide range of operating systems, including Linux and on Mac, and without the need for Windows Media Player on the computer), some people prefer MSC mode.  However, note that the DRM (digital rights management) files need MTP mode - they will not transfer enough (the DRM license will not transfer) in MSC mode.

  If you currently have a mixture of music MTP and MSC mode on your Clip, you can: put the Clip fashionable want to 'delete' your reader. to connect to your computer; Copy your music on your computer and delete the originals of your Clip. Unplug your Clip to the computer; Set the USB mode to your Clip to the other mode, that you want to use in the future. Reconnect your Clip to the computer; Re - transfer your music from your computer to the Clip; and disconnect.  And now, to keep the Clip value mode USB mode (it can set after an update firmware - always doublecheck it after an upgrade).  Voila!