problems with DP in a new U2713H

Similar Questions

• Problems with saving files, creating new layouts div fluid

  Problems with saving files, creating new layouts div fluid. Can I reinstall all the software Dreamweaver?

  Thank you

  I reinstalled and all is well.

  Sent from my iPad

• Is anyone having problems with their 6 s new more not to send and receive images through text messages unless your cell data are lit?  Even if I'm on wifi, I won't get it the pic unless the cell data is on?

  Is a person with problems with their new 6s more iPhone send and receive pictures via SMS?  Even if I'm on WIFI, I have my cellular data button turned to receive a picture. Then in turn instead to use WIFI, it devours my data plan. If to halfway through the month I get warnings that my data plan has almost disappeared. I did everything, including resetting the phone to factory settings. It also does not send a text if IMessage is turned on. It switches immediately to Imessaging which of course, again use my data plan. Of course, I could use some help with this. BTW, my text messaging service is connected to my phone number and not my email. Who was one of the suggestions that support Apple told me to check. Never in my life have had so many problems with a phone since I bought this iphone 6 s.

  Mgibson2425 wrote:

  Is a person with problems with their new 6s more iPhone send and receive pictures via SMS?  Even if I'm on WIFI, I have my cellular data button turned to receive a picture. Then in turn instead to use WIFI, it devours my data plan. If to halfway through the month I get warnings that my data plan has almost disappeared. I did everything, including resetting the phone to factory settings. It also does not send a text if IMessage is turned on. It switches immediately to Imessaging which of course, again use my data plan. Of course, I could use some help with this. BTW, my text messaging service is connected to my phone number and not my email. Who was one of the suggestions that support Apple told me to check. Never in my life have had so many problems with a phone since I bought this iphone 6 s.

  SMS is a function of the carrier, you will need to contact your cell phone provider and see what is the matter.

  IMessage uses very little data.

• Problems with WiFi on my new HP 2000-2d01SQ

  Hello

  I have some problems with wi - fi on my new HP 2000-2d01SQ. Without doubt, I installed the drivers bad for wi - fi.

  If it helps, my hardware for the network controller ID are:

  Network controller

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C

  PCI\VEN_168C & DEV_0036 & CC_028000

  PCI\VEN_168C & DEV_0036 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  I would really apreciate your support, because I think I'm doing something wrong.

  Can't wait to meet you.

  Elena Ghinea

  Hi, Elena:

  Here are the links to the drivers you need for these devices:

  Network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1&cc=us&DLC=en&LC=en&OS=4158&product=5449928&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126476-1&cc=us&DLC=en&LC=en&OS=4158&product=5449928&sw_lang=

  PCI Simple Communications controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126601-1&cc=us&DLC=en&LC=en&OS=4158&product=5449928&sw_lang=

  While it appears not as missing, you also need this driver for the Bluetooth work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127984-1&cc=us&DLC=en&LC=en&OS=4158&product=5449928&sw_lang=

• Problem with scanning from the new laptop with Windows 8

  I have a Photosmart C4480 all-in-One printer/scanner/copier.  Since getting my new laptop, I have problems with the analysis feature.  I installed the software CD, and think I have downloaded the drivers for this printer.

  Indicates the serial number found on the bottom: model of regulation SNPRB-0721

  I hope you have a resolution for me.

  Thank you!!!

  I've found a workaround.  If I used Windows software to scan, it works correctly.  It works just not when I use the button on the printer itself.

• Problem with MAC pinning and new VLAN

  [Cross Announces nexus 1000V and forums of the UCS]

  Hi all, I have a working of the UCS 1.4 configuration (3i) and the Nexus 1000V 1.4 and according to best practices guide uses "channel-group auto on mac - pinning mode" on the uplink of Nexus. I have a problem when you add a new VLAN in this environment, and it is a reproducible problem in two different facilities.

  I pass by the VLAN usual creation process on the Nexus, the network upstream and within the UCS himself. I create new port vethernet profile and set it as an access port in the new VIRTUAL LAN. However when I join a VM (existing or new) to this new port vethernet profile in vCentre virtual machine cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto on mac - pinning mode', the virtual machine will start instantly talk to the outside world and the new VIRTUAL LAN is running. Can I turn MAC pinning back once again, and everything continues to work.

  So the question is, is this normal or is there a problem? MAC the Θtiquetage has a brief interruption of the uplink, so is not a viable long-term customer solution when they want to add new VLAN. Is it possible to add new VLANS in this scenario without any unavailability of the network, but brief?

  Thank you

  Close the loop on this.  You tap the CSCto00715bug.

  Symptom: New MAC address is not learn on vem in the l2 table even though the mac address table is not overflow yet. vemcmd show l2-emergency-aging-stats | grep "Number of entries that could not be inserted:" will show extreme large number. Conditions: Nexus1000v VEM running on SV1.4 release. There are two CPU cores on the host. This issue may happen at race condition. Workaround: Reboot the ESX/ESXi host. 

  This problem is corrected in the 1. 4A release.

  Kind regards

  Robert

• Problem with slides on the new Captivate 8 model objects

  Hi all

  Recently, when I created a new project model of slide objects are all too big to slide, no matter which project to choose.  I have uninstalled and reinstalled the product several times and deleted all the files about the problem but I still can't get it to work.

  

  You can see here that the objects are all larger than the slide behind it, which leads to the items ending on the side when projects are published and in preview.

  When I try to do a sensitive issue I get the opposite problem with the objects being much too small as shown here

  

  If anyone has had this problem >

  "All files"? Are you sure that you deleted the Layouts folder in public documents and updated the Preferences folder? The screenshot shows one of the default themes, you have customized this theme? It happens with all the themes?

• Problems with the creation of new samples

  Hello

  I seem to have huge problems with get newly created real, etc. in my palette of shades. To be as detailed as possible about this problem I will inlcude the two links that I tried to follow along.

  http://www.Suite101.com/content/creating-pattern-fills-in-Adobe-Illustrator-a74636 -a simple guide to create new patterns of filling to ensure that I do not have anything wrong.

  http://www.vectordiary.com/Illustrator/bling-bling-text-effect-tutorial/ -guide of what I'm trying to do

  I am relatively new to this program so I could be overlooking something, but I'm sure I was as complete as possible with it. Every time without fail I have my bounding box invisible sent to the back layer more remote with no border or background, then drag it to my Swatches palette, that nothing is happening. I can drag in the symbols but that's all, nothing happens. Maybe is something that these tutorials have missed? Or I have to (I'll try and make as much sense here as possible) cut and remove all the model outside of the rectangle enclosing invisible (which I sent to the farthest back layer) and group them before dragging them from the palette of nuance? I use Illustrator CS3 if that helps at all.

  Any help would be much appreciated, it's driving me crazy

  This be added to your new swatches so quickly that you don't notice yet it is at the bottom of your color chart (scroll down).

  Looks like your boss is tracks filled with a gradient, so if this is the case you will not any offending items. Do a test by drawing a shape(eg: star) and this dragging to the Swatches palette, if it creates a mosaic of model that you probably have a faulty element within your original selection (for example: linked picture)...

  I would like also in color chart context menu choose > select unused nuances and delete those, so your progress can be better monitored.

• Problems with connecting fiber and new router AirPort

  I installed the fiber optic connection to replace my cable modem connection... I have a network of airport for a long time. When I bridge router ISP in my airport network that there are multiple problems. The major is that when you plug the ethernet cable from the modem ISP Ethernet port on the WAN of Timecapsule port all the TC LAN ports go dead. (the ISP's modem has already a cable ethernet in the WAN port or the first port that comes from the optical network Terminal that the fiber optic cable to connect from the outside). I talked to the ISP and they say just use any ethernet port to connect to the WAN port on the TC. On their end, they say everything is connected and works... then it's the Apple... I bought a new TC and changed my ethernet cables, but all I can establish is a wireless network. My network is itinerant and all of my extremes are connected with cables, but all on my main TC LAN ports are dead. I rebuilt my network and the same problem... And I think that the culprit is ports LAN TC is off

  Unfortunately, Apple has designed their routers airport to work with a standard cable and DSL type connections. The fiber is a whole new game ball, and Apple has not yet learned the rules of the game, so you may or may not have a really hard question.

  When you plug the ethernet cable from the modem ISP Ethernet port on the WAN of Timecapsule port all the TC LAN ports go dead.

  Before you connected to the fiber "modem" Time Capsule, did first reset you back to default settings... and then... set up again I hope to work with the fiber optic router?

  If this isn't the case, you need to do whenever you change providers or the modem that the Time Capsule connects to.

  All other devices that might be connected to the time Capsule should be turned off and unplugged.

  Then, if the time Capsule can be configured to work with the "modem" fiber, you can connect devices to the time Capsule one at a time to ensure that each of them is working before connect you to the other.  It may be necessary to reconfigure some or all devices that are connected to the time Capsule so that everything works again.

  Bottom line here... get the time Capsule working first with the "to modem" fibers.  Then start to add other devices to time Capsule one at a time.

• Problem with sound on my new Satellite L655-1FO

  Hello

  I bought a new Toshiba Satellite L655-1FO before 5 days, I have install all the driver on XP one my sound work ok, but today I connect my headset and I didn t hear sounds like the music, just a few scratches sound and when I disconnect my helmet, there is no more sound from my PC.

  I restarted but the problem remains. What's happen with my pc, is it broken?
  I need to know because I have 7 days to save it and get new ones or get in touch with the service?

  Thank you

  You must understand that no one here can say with certainty whether or not something is broken. We just speculate what may be the problem.

  I recommend you to install Windows XP Home edition once more to see if this problem will be solved. Otherwise, contact your local dealer and ask for replacement.

  In the headphone port, there is little switch that turn off internal speakers when external speakers are connected. Maybe this switch stuck somehow. Who knows?

• Problems with the installation of new system. Need help.

  Hello

  I'm new here so I'm sorry if I posted this in the wrong section, I tried to look for this subject but nothing similar has come so I decided to create this.

  I have a HP Pavilion DV7-1020ea, which came with Windows Vista Home Premium 32 - bit installed and a recovery disk that was on the D: partition, but no real recovery disc/DVD.

  This laptop has had a hard drive failure lately, so I replaced it with a new hard drive cool (320GB, same accompanying).

  The new drive as you probably already know is fresh and it does not all partitions or any information, so without recovery of D: partition.

  I need to mention that the phone was fully functional, keyboard, touchpad, and quicklaunch worked correctly.

  I have some experience with computers, so I know how to recover, set up the startup in the bios etc.

  I tried to install Windows XP Professional 32-bit and Windows Vista Home Premium 32 - bit on my laptop but I found out that the DVD drive makes a funny (not damaged or broken), as a lack of sound recognition. The two systems of Windows are original, and I have a license for them.

  Its different when I try to install WIndows 7, the DVDs are recognized immediately. All system disks work on other computers and work quite correctly. The portable disk drive is not damaged.

  The only thing I saw was: No. Bootable Device (3FO)

  I didn't know what to do so I handed the laptop to an expert.

  When I arrived at my computer back, the computer had Windows 7 Ultimate 64 bit installed, but the problem was that quick launch buttons, keyboard and Trackpad was not working. The only way to use the computer was to plug in an external keyboard and mouse which is not a solution.

  -The keyboard not working outside not BIOS, press No button in text fields do not work. The only functions that worked were when I pressed fn + f8 to make the screen brighter and oddly enough, it worked, so when I pressed the keyboard caps lock, caps lock lights on the laptop keyboard as well.

  -The touchpad itself does not, the keypad or buttons. The only thing that works is the light that changes when I press the button disable from white to red, and then from red to white.

  -The quicklounch does not work. The works of power button (turn on the laptop since it is a button) but the led behind it does not work. For speaker and Wifi light is always red (off) and even when I touch it, it will turn blue/white. The rest has a white light behind her, but does not work.

  I also noticed that when I go into the BIOS, the bios is absolutely slow. It takes about 30 seconds to react when I press the buttons on the right, but also it does not react sometimes and it's like in all sections (but it works for keyboard).

  Later, I went to the Device Manager and discovered that there are 3 basic system devices that are not installed. I tried to install by searching online and locally, but no drivers were found.

  All devices have "the drivers for this device are not installed (Code 28)" and the drivers can be found online or on-site.

  Details of devices:

  Basic device PCI system bus 6, device 0, function 3

  Basic device PCI system bus 6, device 0, function 1

  Basic device PCI system bus 6, device 0, function 4

  Trying to fix my keyboard, the touchpad and quicklaunch buttons I went on Synaptics website to download the drivers for the touchpad, updated it, restarted, did not work. I also went on the official site of HP to download the drivers for quicklaunch to my computer, keyboard and mouse, put up-to-date, did not work.

  I also tried to put in the DVD of Vista and XP DVD to see if the computer is able too see them at all, but when I went to my computer and looked at the DVD player, it says "Insert disc in drive E:." so none of them have been recognized by the computer.

  I don't like Windows 7 and I would really like to have my laptop runs on my old system which is Windows Vista Home Premium 32-bit with keys on keyboard, keypad, tactile and functional quicklaunch.

  Could you help me then install the Vista drivers or to solve this problem?

  Tank you!

  You are the very welcome.

  See if the chipset driver installation done something to help.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  It would be the only suggestion I can offer.

  I think you have a motherboard problem or something related.

• Problem with writing in the new file every day, error #1

  Hi, I have build a vi that writes data measured for each second of the file. This vi will be used for the acquisition of long-term data and I want to write the data to a separate file every day, else the file becomes

  very large. The vi is supposed to work like this, first set the folder to save it and then start logging with the "datalogon" button, first write the column names in the file and after that write data

  every second. If the date is the same newspaper, data, if the date is not the same write the new file name, write the column headers and write the data again every second. The date is used as the file name.

  This work is quite good only at the beginning of the vi I get the message "error 1 occurred open/create/replace the file writable spreadsheet String.vi-> write to the spreadsheet (string) .vi-> NHR file -

  SerialDaq - 03 APR 2013 .vi. I did some tests and it seems that in the first or the second round of the loop, the path in the annex is ' file name:------"and not drive:- and this seems to be caused by the fact

  that I first write the column headers, and then the data (if I write only the data of the problem does not occur).

  So I (think) for what is now the problems but don't don't know how solve it, I would appreciate it if someone could help me with this.

  Regards, Martin

  I made the change you mentioned and to my surprise I got the error message and also, with the vi you sent, I took look at it and found that:

  -If I first enter the "folder to save the file', then run the vi and then press on the" data connect "I don't get the error.

  -If I first run the vi, then enter the folder ' save file to "and the hit" the data log on ' I get the error.

  I also tried with the vi original (without the connection shiftregister in the case of false and init for removal) and which gives the same result as above. If I get the

  error message and choose stop the vi, start the vi again once I don't get the error because the folder in which the file is entered. This issue appears only when there is no file «»

  to save the file "in the dialog box.

  While I'm writing this I realize that "folder to save the file" is outside the while loop so only executed at the start of the vi is maybe I have to put it inside the while loop? A tried

  This and at first, it seems that the problem is solved, I don't get the error message on my screen, but it still appears on the error handler in another part of the vi (visa series).

  Oh, Yes. The 'name of the resource visa' and 'file to save the file' are both outside a while loop and are only read at the start of the vi, at the moment they have not a valid

  the error value is generated.

  Problem solved, thank you for your comments!

  Regards, Martin

• audio problems with Skype/windows 7 / new dell vostro__

  have you tried Skype and video chat in gmail and have no sound in both directions.  Skype said microphone and the speakers are working correctly.

  have tested the built in camera/microphone in this new operating system windows 7 dell vostro and they work fine.  Played the music sample on the computer and the sound work great.

  been all over their audio settings help and nothing works - help me please, I want to hear and talk to my grandchildren.

  Hi jill.ford47,

  1 - is the first time that you are faced with this problem?

  We recommend you to check if the mix parameters for the applications you use are activated. To do this, try the following steps.
  Step 1: Turn on the mixer for running applications settings
  a. launch Gmail or Skype video chat.
  b. click on the volume icon in the taskbar.
  c. click mixer.
  d. under Applications, select that is to reactivate the sound for all running applications.
  e. check if the problem persists.

  Similar has been discussed by the Skype community; Visit this link for more information:http://forum.skype.com/index.php?showtopic=33199

  Post your request here for help on Skype: http://forum.skype.com/index.php?showforum=5

  Visit our Microsoft answers feedback Forum and let us know what you think.

• TMS 14.2 problems with the planning of new conferences

  Hello

  yesterday, we made a mistake. We have upgraded to 14.2 TMS. :-D

  The Smart client scheduling is...!

  So we need to use the normal 'new conference' Web page.

  But when someone klicks on the calendar to select a date, nothing happens.

  We use here the IE 9.

  It works with Firefox, Safari, IE 8, but not with IE9.

  Who has this problem too? Is there a fix for this Bug?

  Our workaround is to type the date manually.

  Greetings

  Jens

  Great and good to hear. Thanks for the follow up of Jens

• Open a second subscription because my old one has problems with paypal. CANCEL NEW ACCOUNT HELP!

  Hi, then was told not to get the days cloudless adobe, that I needed to open a second subscription that I did, so now im stuck with two that I was told that I would get my money back and the new account would be cancelled still have not resolved.

  Pls help me with this.

  Best regards Guilherme Cunha

  Use the Chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )