Problems with Flash video streaming in any browser (Windows 8.1)

Similar Questions

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• Problem with Flash video...

  I just added two .flv to a single .fla file. Inside the movie, there is a menu which will load video whatever the user selects. I only have a problem, well, two. I get this warning when I export, publish and preview the movie.
  
  "* WARNING * binding identifier"fl.video.FLVPlayback"was already assigned to the symbol ' Cat 1 - elements (Culture) / Tzu-Chi/highspeed 'and cannot be assigned to the symbol' Cat 1 - elements (Culture) / Tour of Asia/highspeed", given that the link identifiers must be unique.
  "* WARNING * binding identifier"fl.video.FLVPlayback"was already assigned to the symbol ' Cat 1 - elements (Culture) / Tzu-Chi/highspeed 'and cannot be assigned to the symbol' Cat 1 - elements (Culture) / Asian Gala 2006/highspeed", given that the link identifiers must be unique.
  
  How can I change the link identifier? I tried to right click on the symbol in the library, but I can't change the options. I imported the video just by using the file, import, and then import video. The film still works well, and all the buttons work. I just want to avoid any problem, I may be in the future.
  
  The other problem also handles videos. During playback of the video, the user has the option to return to the menu (which is just a function gotoandplay at frame). The problem is that the video continues the piece in the background (you can hear the sound), even if the film went to the frame and you do not see the video. How can I get the video to stop playing? I tried to use the stop() function in fl.video.FLVPlayback but no go. Any suggestions?
  
  BTW: using actionscript 3 and CS3.

  OK, found the solution to my problem of a second. I can change the name of instance... then in turn allows me to stop the video (I'm sure if it continues to load in the background; I'd rather not do). Here is the code I used, simple:

  VideoInstance.stop ();

  As for the other, still to find an answer.

• Problems with audio/video playback and the Source window

  I have some videos that I try to import into my sequence. Whenever I have open the video in my source window (or drag it to the timeline), the sound goes crazy. He starts to jump and identified himself. When I open the movie file in Quicktime format on my computer, it opens and plays very well. In addition, I don't know if it is not connected, but sometimes, when I open a video in the window of my Source, there is no audio. I can drag to the sequence and double-click on it to put the video of the sequence in the Source window and it plays very well.

  The video that I have problems with is a .mov, filmed from an iPad (not sure what model of iPad). It is filmed in Portrait mode, do not know if it matters. Please let me know what other information would be necessary to solve this problem.

  
  Thank you!

  First, answer the questions in the FAQ of Information http://forums.adobe.com/message/4200840

  Second, it IS possible whether the ipad video like video iphone

  IPhone will not edit easily because it uses a variable rate

  -A fix in the #22 http://forums.adobe.com/thread/934466 message

• Firefox freezes - icon flashing task bar - seems the problems with flash - reinstalled both

  Using firefox 31.0 and uses the latest version of flash

  Often when visiting places such as youtube - firefox hangs with the firefox icon will blink in the taskbar - I have no open windows and it's a newish windows machine 7 - have reinstalled the two fire Fox and flash and still have the issue.

  Help / advice would be much appreciated

  Hello

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

  Does this solve the problem? Let us know.

• I have problem with my video card

  * Original title: video card

  Hello, I have a problem with my video card. my computer is Windows xp it has 128 MB, when its with windows vista there 122, when it has the sound running windows 8 256 MB. and why? and also when I see my name of the video card on windows xp it is the express chipset family intel 82915 g/gv/910 gl, but when I saw the name of my map video on windows 8 it was microsoft accelerator or something like that: S and please help me

  Hello

  1. are you referring to an integrated video card or video of the add-on card?

  2. What is the size of the video card?

  Family of express chipset Intel 82915 g/gv/910 gl is not a video card. It is built into the processor.

  Check the video card, follow these steps:

  a. click Start, click run.

  b. type devmgmt.msc and press to enter.

  c. develop graphics cards and you will see the video card (in your case, you could see graphic IntelHD express).

  I suggest you check the link for more information about the system requirements for Windows 8.

  System requirements Windows 8

  It will be useful.

• Hello world. I have a problem with crossfade video. In my calendar, I have my blocks. These are Mxf files, but I can't ' apply the fade between them. Crossfade will not work. Any idea? Thank you very much

  Hello world. I have a problem with crossfade video. In my calendar, I have my blocks. These are Mxf files, but I can't ' apply the fade between them. Crossfade will not work. Any idea? Thank you very much

  May be you have not all handles:

  Adobe Premiere Pro help. Overview of the transition: application of transitions

  If this isn't the above post a screenshot of the blocks.

• Problems with HD videos on Satellite M70

  Hello
  I recently bought an M70-208. It seems that I'm having problems with HD video with VLC and WMP. For example, during playback of the demo "HDtoGo" video, the speed is very slow. Another not Toshiba laptop that I use for my job playing this video smoothly, despite its lower configuration.
  I tried a different combination of energy management, but it remains the same. I don't understand what is happening.
  In addition, this laptop makes me happy (6900 point to 3D mark05).
  Thank you for helping me.

  Hello

  Maybe the my English is not very good, but what you mean under flow? Is there any kind of cutting during the video?

  Maybe a background app occupied the CPU and because of that the video doesn't well work. Try to check it out.

  Anyway, as you say this camera has great value on chart of test. My friends has M70 - 257.

  Good bye

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem with the video card Inspiron 7520

  Hi all

  
  Since I installed the 8.1 update windows I have problems with the video card. PC 2 video cards are installed:

  (1) AMD Radeon HD M 7730
  (2) Intel(r) HD Graphics 4000

  The main problem is that the resolution of the screen is fuzzy. I downloaded from Dell, the updates for both cards and tried to install, but it does not change Sub. My question is: is there a special procedure to install a driver?

  Thanks to you all!

  HELPPPPPPP!

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit.

  I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit. Whenever we try to open the computer software crashes, we deleted the lock file and reset suggestions as suggested, without success. We have uninstalled and reinstalled the software without success, still the same problem of crash

  If all of the computer crashes, it's a hardware malfunction or a bad/corrupt/old video driver.

  First install/reinstall the latest driver for your graphics card. If this does not help, then you need run diagnostics on your hard drive, memory and also make sure that the fans are cooling the CPU correctly.

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.