Problems with Motorola Defy India Froyo update

Similar Questions

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• Problems with aero after the latest updates

  Hello

  Someone had a problem with the latest Microsoft security updates
  touching the aero desktop theme.

  Since I downloaded the updates my aero as a theme stopped working.
  I did a roll windows back but I still have the same problems.

  The updates are #KB971029 and #KB971029 the
  updates have been downloaded on 03/17/11

  I hope someone can help with this problem.

  All the best

  Philip Davies

  Hello

  OK try to remove these updates to see if that helps. Sometimes manually
  install the updates one at a time will prevent topics such as this one (if the)
  mises_a_jour have been the question).

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Or

  The problems with the removal of updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  AFTER removal of updates, do a system restore to before
  updates have been applied to the origin. Therefore, affect the total amount of
  updates are deleted.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =======================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  If necessary try a repair Installation which allows to keep the programs and data however
  redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• Oh no! There is a problem with your recent payment. Update the details of payment for uninterrupted service.

  Hello

  I get this message:

  
  Oh no! There is a problem with your recent payment. Update payment details for uninterrupted service.

  But I have no idea what the 'problem' and payment information are correct...

  What should I do? It seems impossible to contact any Adobe
  

  Hi liamg9149512,

  I see that the payment issue is now resolved with your account.

  Please let us know if there is anything else, we can help you.

• Serious problem with watch since the software update

  Hello

  I have a serious problem with my watch since to do the update of the software this morning.

  Watch dial keeps flashing between the Apple logo, dial and access code.

  Watch does not respond when you try to enter the access code or button does not not so can't turn off to try to restart.

  I tried to disable pairing my iPhone 6s but watch be message saying "can't match Apple Watch - Activation lock could not be disabled on your Apple Watch because of a server error.

  Nothing seemed abnormal during the update, I just let him do his thing.

  Any help would be welcome.

  With great thanks

  Nicola

  Hi Nicola

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.

• Problem with downloading of applications and updates

  Hello

  I get the error when you try to download certain applications from the Mac App Store.

  

  And when I try to update applications.

  

  Here is a log from the console:

  storedownloadd [493]: * the Assertion failure in French-[CheckPreflightOperation verifyDistributionAtURL:allowsDevSign:allowsUnsigned:osVersionToBeInstalled: err or: distributionController:], /Library/Caches/com.apple.xbs/Sources/Commerce/Commerce-462.9/CommerceKit/Check PreflightOperation.m:291

  I have a month old Macbook Pro. I have no problem with downloading the applications from my old Macbook on the same network.

  What should I do?

  Hello..

  Start Safe Mode removes the system caches that can help.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  Then try the App Store.
  

  On Safe Mode

• iPad2 and problem with the SIM card after update

  even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

  I changed and I tried with another SIM card but the problem remains.

  I did have all those problems with 9.2.1.

  Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

  Thank you

  Do you see the network? and is it strong enough?

• Problem with the formats video pro update 2.0.4

  Hello

  I have a problem with FCPX that appeared after I installed that formats video pro update 2.0.4 (very probably related to this update because had no problem before it). Final assembly runs very slowly and when I try to quit smoking I get a message that says 'Cancellation tasks background' with a progress bar that never begins. I opened the window of background tasks and there is no background running task. Only force leaving the application closes.

  System specs are:

  FCPX version 10.1.4

  Mavericks OSX version 10.9.5

  MacBook Pro 15 "in early 2011, intel core i7 at 2 GHz, 8 GB of RAM"

  Any help would be massively appreciated! Thank you

  Start by removing the preferences. Press the command and option keys at startup and confirm.

• Problem with vista 64 - not another update

  I am running vista 64 ultimate sp1 and for some reason, I can't take

  Update cumulative security for IE7 for Win x 64 (KB972260) 8007371b
  SP2 KB94865                                                                         800F081F
  IE8 for vista 64 8007371b

  I have tried and read all what google can find
  I ran the Fixit
  I ran sfc/scannow - no problem
  I ran the tool - no error
  I disabled and then uninstalled mcafee
  I disabled at startup, which was not microsoft
  I tried as well the update of windows and programs stand-alone installation for all updates 3 - no difference
  reinstalled windows update customer... no diff
  tried in safe mode - same mistake
  renamed caroot2 and software distribution directories - nope

  I'm starting to think this is a problem with ie and you cannot uninstall it. I tried to install these updates several times and I got other errors and even once told me I didn't need the update (2260). I think I had a 80073712 and 7000 d also, not sure update. These errors only came once or twice, said them are the main errors

  the strange thing is that there still updates
  It took these updates after the fact

  Update security for Windows Vista for x 64-based systems (KB973768)
  A security update for Jscript 5.7 for Windows Vista for x 64-based systems (KB971961)
  Update for Windows Mail Junk e-mail filter for x 64 systems [September 2009] (KB905866)
  Update security for Windows Vista for x 64-based systems (KB967723)
  Update security for Windows Vista for x 64-based systems (KB970710)
  X 64-September Windows malicious software removal tool (KB890830) 2009
  A security update for Windows Media Format Runtime 11 for Windows Vista for x 64-based systems (KB968816)

  These upates are more recent than those that it won't take.

  I even tried to reinstall an update but after sitting between 4-5 hours and thinking that he was going to work, he stopped on the last line to 60% and pops up a message saying that he could not continue and it has been reinstalled the origin o/s. I think that this may be due to fact I said to take updates, maybe I should not have.

  Hello

  Welcome.

  A clean install will thus fix registry problems.

  All the best!

  Thank you, and in what concerns:

  Diana D D - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• problem with the installation of the updates updates 12

  original title: problem with installing updates 12 updates, impossible to install, but all others have taken

  I have a problem with the installation of updates, some have taken while 12 others impossible to install.  I tried the Mr. fix, but will not be too much work.

  Hello

  1 did you change on your computer?

  2 are you able to install some other updates?

  Method 1:

  Try to reset the Windows Update components

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  I also suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Problem with the microphone back after update 6.0.1

  I had problem with mic - people could not hear me, because my voice was very quiet. Then I turned off the mic noise suppression and everything was fine. Until the update to 6.0.1. Now, I have the same problem. And I can't turn off the mic noise suppression, because this option is simply missed.

  Any ideas how to solve this problem now? Or should I downgrade to the previous version of android?

  UPD:, May 19. Sony market topic as resolved. But it is not really resolved for the moment. They will release an update in "the coming weeks". And because we still have the same problem, I have a topic not marked as resolved. As soon as we will have the option of rear noise suppression and this will really help us - I will then return the resolved brand.

  http://talk.sonymobile.com/T5/Xperia-Z3-compact/mic-problem-returned-after-update-6-0-1/m-p/1126001#...

  UPD 2: Po 575 version the noise cancelling feature is back. People can hear me again. Thank you, Sony

  in jour.575 has the option for back to mic noise suppression. Availability of the update will be different by market, country and operator.

• Problems with the smartphone after CSI updated!

  I recently updated my Live with player at the build.587 and noticed the bugs, most of the people are on (e.g. Messaging bug LED light), my main problem is the battery. My battery drained from 49% to 27% in 2 hours - it's pathetic, I think that there is something wrong. Also I put a restriction on the basic data, no task killer/antivirus, no other "heavy" apps-apart cards. Xperia Mini my brother gets along fine, it gets about 15-20 hours out of it. So what is the problem with my Live, battery saving tips?

  P.S. I have already searched on google but could not find an article "useful."

  Hello

  I tried another method to see if that would work - and he did . I was doing about 5% battery discharge then completely recharged. Now I use it and it works great, it lasts about two days (I turn off at night) and I'm happy with that. Thanks for the advice anyway: smileywink:.

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with VGA card after Windows Update

  Hi all.

  Today I start to address a problem with me second VGA card (Matrox G200 G2 + / QUADP-PL/7) after a yesterday updated windows.
  I am able to see the other 4 monitors, but with a yellow triangle.
  You thing has remove updates yesterday going to solve my problem?

  PS:If you have an another idea is welcome

  Thank you and best regards.

  Hello

  Please contact Microsoft Community.

  This problem may occur if the VGA card drivers are updated after the installation of Windows updates. I suggest to follow the steps below and check to see if problem persists.

  1. Click Start and stop in the search box, type Device Manager.
  2. On top, on the start menu, click on "Device Manager".
  3. In "Device Manager", double click "Graphics card" expand. "."
  4. Click on "display Matrox G200 G2 + / QUADP-PL/7 ' and click 'properties '.
  5. In properties, click on the "Drivers" tab and check if the option 'Return to the version' is 'active '. If so click on "Roll back" to restore the previous version driver.

  Note: If "Roll back" is greyed out, then see the article restoration of the system;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: try to restore your system to an earlier date when everything worked correctly.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Meet us, then we can help you further.