problems with special fonts
I was wondering the best way to deal with the non-standard fonts used in a project CVI? I have an application that uses the "SWAstro" font for the up and down arrows as indicators in a table of the CVI. When you run the executable file on a computer that has installed the CVI, the arrows appear very well. On computers that don't have the CVI run time engine installed, the arrows simply show upward in the form of vertical bars.
Is it possible to have my program to install a font, if it is needed? I'm better off everything including the font with the executable file and having the user install themselves separately? I tried to find a more generalized windows font that a up and down arrows, but the ones I found (like Wingdings 3) doesn't seem to be available in CVI.
Thanks in advance for the help!
Hello
You may not be able to set the font as "Wingdings 3' of the IUR Editor, but it is possible from the code.
Here's a simple example. It defines the label for a control on the symbol corresponding to the key 'a' on the keyboard.
You just have to find the right key for the symbol you want.
SetCtrlAttribute (NLP, ctrl, ATTR_LABEL_FONT, "wingdings 3");
SetCtrlAttribute (NLP, ctrl, ATTR_LABEL_TEXT, ' a');
Tags: NI Software
Similar Questions
-
Problem with some fonts of symbols after the installation of the Sierra
Hello
I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.
All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.
In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.
I already tried the following:
1. check the fonts in font book
2 fix the duplicates in the font book
3. using the "Restore Standard fonts" option in the font book
4 deleting a file in the folder Preferences plist Fonts
5 deleted the cache of police and the database
I'm out of ideas. Has anyone else had the same problem found a fix?
Kind regards
Greville
I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.
And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.
So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.
-
Dear friends,
I have a problem with the fonts in Adobe Muse.
Muse does not display the system fonts in Windows 8.1
This is unusual. I work with Adobe Illustrator and Photoshop and I don't have this problem.
I installed Adobe Muse on two computers and everything works fine.
You know if you have the solution?
I have several fonts installed on PC and I want to use them.
Thank you
Hi Ricardo,
As mac_heibu said, the Postscript fonts will not work in Muse. Check out this link to learn more about the difference between postscript, truetype and opentype fonts (what is the difference between OpenType, TrueType and PostScript fonts?-Windows help). If you do not know what kind of fonts that you process, check this resource on the formats of police identification (identify the Formats of police > the complete manual of typography: on the baptismal)
Hope this helps,
Emily
-
problem with special characters
I have a problem with special characters. When I save a project or for export.
& yacute; figure like & Yacute;
& uacute; is shown as & Uacute;
& aacute; figure like & Aacute;
& iacute; figure as & Iacute;
& oacute; is shown as & Oacute;
& eacute; appears under the name & Eacute;
Hi Stephan,
This has been fixed in the latest version of reflow; Please install the latest version.
Thank you
-irina
-
Problem with resizing fonts in the menu
Hello, I'm almost done with my website, http://www.trolllord.com but I'm running into a problem with the font size in the menu. At some point I must have accidentally set something wrong and need a new set of eyes on it. When you hover over the menu items and sub-menu, the font size will more great. This causes a few things up to two lines and is harsh on the eyes. Can anyone help? Here's my CSS for the menu:
/ * Clearfix * /.
. Clearfix: before,
. Clearfix: after {}
content: "";
Display: table;
}
. Clearfix: after {}
Clear: both;
}
{.clearfix}
* zoom: 1;
}
/ * Basic styles * /.
{of NAV
Display: block;
Width: 100%;
min-height: 40px;
height: auto;
do-size: 0;
do-family: ' PT without ', Arial, without serif.
make-weight: bold;
position: relative;
margin: 0;
color: #fff;
background-color: #000000;
text-align: center;
}
NAV ul {}
padding: 0;
margin: 0 auto;
min-height: 40px;
height: auto;
}
/ * Only need to make a set of rules for nav li here * /.
nav li {}
text-align: center;
/ * This defines the inline-block elements, but also works in older versions of IE when fails inline-block * /.
display: inline-block;
Zoom: 1;
* display: inline;
vertical-align: top;
position: relative;
Width: 100px;
line-height: 40px! important;
height: 40px! important;
do-size: 11pt;
-webkit-box-sizing: border-box;
-moz-box-sizing: border-box;
box-sizing: border-box;
}
/ * No need to reuse the float: left and display: block here - in fact it can spoil things later! */
{li: hover NAV
background-color: #993300;
}
/ * Let's worry about the main nav first, then later, the subnav * /.
NAV a {}
color: #fff;
/ * All we need here is block since the li tags are inline-block for us * /.
display: block;
text-decoration: none;
text-shadow: 1px 1px 0 #283744;
}
NAV a: hover, nav one: focus, nav a: active {}
background-color: #993300;
}
/ * An easier way to say that any link that comes after another link needs a left border * /.
nav li + li {}
border-left: 1px solid #576979;
}
{#pull}
display: none;
}
NAV ul li {ul.submenu}
min-width: 200px;
display: none;
position: absolute;
z-index: 100;
top: 40px;
Left: 0;
padding: 0;
margin: 0;
}
NAV ul li: hover ul.submenu {}
display: block;
}
.submenu li {}
background-color: #455868;
display: block;
Width: 70%! important;
}
.submenu li a {}
background-color: #456855;
color: #fff;
display: block;
text-align: left;
line-height: 20px;
padding: 10px 25px;
text-decoration: none;
text-shadow: 1px 1px 0 #283744;
border-right: none;
border-bottom: 1px solid #576979;
}
.submenu a: hover, .submenu a: focus, .submenu a: active {}
background-color: #993300;
}
/ * Styles for screen 1000px and low * /.
@media only screen and (max-width: 1000px) {}
nav li {}
do-size: 10pt;
Width: 50%;
}
}
/ * Styles for screen 515px and low * /.
@media only screen and (max-width: 515px) {}
{#pull}
Display: block! important;
line-height: 40px! important;
height: 40px! important;
do-size: 11pt;
background-color: #000000;
Width: 100%;
position: relative;
}
#pull: after {}
content: "";
Width: 30px;
height: 30px;
position: absolute;
right: 15px;
Top: 10px;
background: url(file:///Macintosh%20HD/Users/redsoxburns/Desktop/wwwroot/images/nav-icon.png) no-repeat;
}
NAV ul {display: none ;}}
nav li {}
do-size: 11pt;
Width: 50%;
border-left: 0! important;
border-bottom: 1px solid #576979;
}
nav li a {}
line-height: 20px;
padding: 10px 25px;
}
}
/ * Smartphone * /.
@media only screen and (max-width: 320px) {}
nav li {}
Width: 100%;
}
{.submenu}
min-width: 44px;
Width: auto;
right: 0;
}
}
Thanks in advance for any thoughts... Tim
Add the "BOLD"...
NAV a: hover, nav one: focus, nav a: active {}
background-color: #993300;
do-family: ' PT without ', Arial, without serif.
}
-
Problem with the font size, appears as expected.
I've been struggling with this for a few weeks now, but surely must is close to solved it. It's just a problem with the size of the police to just that one page.
http://www.kgngroup.NET/logos_and_packaging.html
I want the body of the text to be 10px, but after two weeks, played with all conceivable means, change the font size of the body in CSS and the document itself. I have the consultation in Safari, but others on Windows machines tell me it is out of whack.
My main problem is that I can change the size of the font in the extreme, but he always appears as the same size in the browser (about 12px.) I don't know can be changed because I can change the wording and change online. It's just a problem with the font size. Oh, and in the third column, the one on the right in Dreamweaver, the font looks like it of tiny, can't even read, but in the browser, as the style11 is applied, all three columns search size equal.
Don't know where to go from here. I want to just that the police of the up to 10 pixels.
TIA,
Ken
I guess this is a follow-up of your thread earlier
http://forums.Adobe.com/message/3627681
What would really help in the diagnosis of the subjects such as this is to install the Firebug add-on for Firefox (as suggested in the previous thread).
Firebug shows you visually what CSS rules apply to any element you click on the screen.
In this case, you have a confusion of the CSS cascading over each other font sizes and who is confused by the mix of units without real reason. .style11 is unnecessarily applied to many people
Tags. Remove these classes and to remove the rule.
for example
The tiny font in the RHS column is the first affected by
{.style8}
font size: 0.5em;
}affecting the
then by .style11 {size are: 75 %}}
affecting the
tag.
Result = tiny text (about 2px).
In these cases of mass confusion, my approach is to remove all the sizing of fonts in the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically from the
label facing downwards.That gives you a solid basis without strange effects.
-
Problems with the font on the preview and the final rendering styles
Hello world...
Im having a problem with Robohelp 8 rigth now. When I import a Word document all work very well. and you can se all the content editor of Robohelo just as you have it on your word document, but when you check the overview of the subject, you have any knid of stile on al fonts...
The same thing happened when you generate the page layout.
You can see the title in the editor...
but you can not see the style on the preview
is pretty weir because I think that styles get matter fine (you can see them on the editor of HR), but something to happen later.
Any ideas?
Thanks, Sabin
Hello
It does not work, because your style begins with a number. Rename the style, then it starts with a letter. You can use numbers in a class name, just don't start with them.
Take a bow
Willam
PS. a tip: you can change the to a . It is much easier to maintain and easier to applay.
-
Dreamweaver CS3 problem with small fonts
Hello
I'm having a problem with the text that appears REALLY SMALL and illegible in CS3, when he seemed fine in Dw8. It seems equally well in all browsers.
I talked to Adobe technical support, and they said something about my CSS file is not wrong. I looked, and nothing seems out of the ordinary.
If it's a problem with my CSS file, would not look bad in the browser, so?
Any suggestions?
RonRon,
Thanks for the example file. It's a bit complicated, so please bear
with me.Up to DW8, DW making always targeted the most popular browser
This time. For DW8, who was IE6. Traditionally, the most popular
browser was the most popular because it was the best browser, but which
is no longer valid. Thus, DW CS3 now target CSS 2.1. Note that DW
not compatible with all of the CSS 2.1 specification, but what it supports following
the spec.Your page doesn't have a DOCTYPE, so it renders in "quirks" mode in the
browsers that I tested on WinXP (FF2, IE7, Opera9). DW renders
This page in IE6, but DW CS3 quirks mode can't stand anymore in quirks mode.
Put a DOCTYPE that is similar to the following in your page to see what I mean:" http://www.w3.org/TR/html4/loose.dtd" >
The reason for which the font is so small is because of font size
property to this rule:TD {}
FONT-SIZE: 80%;
}Your page has 4 levels of nested deep tables, so the 80% is made to the
each level. I fixed that in DW CS3 by creating a stylesheet with this rule:TD {FONT-SIZE: 100%! important ;}}
and applied it as a design-TIME Style sheet, you can be
able to remove the 80% in total.Hope this helps,
Randy> Here is a link to the page:
> http://www.ualberta.ca/AICT/IMS/
>
> You should be able to download the source of the page, if you want...!
>
> Thanks in advance for your suggestions... -
Problem with special characters in a column
Hello, I call data from a database and I don't have the rights to the database, the name of the columns have points on behalf here: Parameters.12V_Prog_IccType_A
Is there a way to solve this problem with the name change? Like using (de), [,], "", or something like that?
BR,
Robin
Try the square brackets.
Mike...
-
Problem with special characters in a language other than English
I need to load the Spanish language in the apex; to do this follow these steps
SELECT the parameter, value
OF nls_database_parameters
WHERE PARAMETER like '% % NLS '.
NLS_LANGUAGE SPANISH
NLS_TERRITORY SPAIN
WE8MSWIN1252 NLS_CHARACTERSET
In the linux console
Export NLS_LANG = SPANISH_SPAIN. WE8MSWIN1252
sqlplus / as sysdba
SQL > select 'Annnnnnnn' text of double;
TEXT
---------
Annnnnnnn
1 fila seleccionada.
SQL > ALTER SESSION SET CURRENT_SCHEMA = APEX_040200;
SQL > @load_es.sql;
Procedure-PL/SQL terminado correctamente.
SQL >
------------------------------------
But when I go to APEX I see problems with the display of the characters.
Appreciate any help!
Thank you!
Martin
Solved!
Use another NLS_LANG
Export NLS_LANG = SPANISH_SPAIN. AL32UTF8
sqlplus / as sysdba
@unload_es.sql;
@load_es.sql;
And now works fine.
Martin
-
Problems with special characters with Apex5
Hello together,
I hope, I'm right on this forum with this problem, I have found no other best match.
I have a single database called apex12D on 12.1.0.2 it's my database of the 5 Apex develompent. Apex 5.0.2 is installed, also the German language of Apex. The OS is Oracle Linux 6.
On a second machine that I have configured the Oracle Data Service remains with tomcat (installed from the repositories) and apache (also installed deposits), running on the Oracle Linux 7 operating system. This machine is my "http server" to connect to my Apex environment. Everything is very well workung, but when I go on my Apex Admin Backend all special characters in German (A, U, O,...) are displayed incorrectly. Which looks very good.
What makes that I made:
To the database (apex12D), I put all the nls paramereters the installation of the database of German letters:
SYS@apex12D> select * from nls_database_parameters; PARAMETER VALUE --------------------------------------------------------- NLS_RDBMS_VERSION 12.1.0.2.0 NLS_NCHAR_CONV_EXCP FALSE NLS_LENGTH_SEMANTICS BYTE NLS_COMP BINARY NLS_DUAL_CURRENCY ? NLS_TIMESTAMP_TZ_FORMAT DD.MM.RR HH24:MI:SSXFF TZR NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR NLS_TIMESTAMP_FORMAT DD.MM.RR HH24:MI:SSXFF NLS_TIME_FORMAT HH24:MI:SSXFF NLS_SORT GERMAN NLS_DATE_LANGUAGE GERMAN NLS_DATE_FORMAT DD.MM.RR NLS_CALENDAR GREGORIAN NLS_NUMERIC_CHARACTERS ,. NLS_NCHAR_CHARACTERSET UTF8 NLS_CHARACTERSET AL32UTF8 NLS_ISO_CURRENCY GERMANY NLS_CURRENCY ? NLS_TERRITORY GERMANY NLS_LANGUAGE GERMAN 20 rows selected.
SPFILE parameters tells a different story, I tried to put them with "change the database < parameter > = < value > scope = spfile" and if a database has restarted, nothing changes.
SYS@apex12D> show parameter nls NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ nls_calendar string GREGORIAN nls_comp string BINARY nls_currency string $ nls_date_format string DD-MON-RR nls_date_language string AMERICAN nls_dual_currency string $ nls_iso_currency string AMERICA nls_language string AMERICAN nls_length_semantics string BYTE nls_nchar_conv_excp string FALSE nls_numeric_characters string ., nls_sort string BINARY nls_territory string AMERICA nls_time_format string HH.MI.SSXFF AM nls_time_tz_format string HH.MI.SSXFF AM TZR nls_timestamp_format string DD-MON-RR HH.MI.SSXFF AM nls_timestamp_tz_format string DD-MON-RR HH.MI.SSXFF AM TZR SYS@apex12D>
Interestingly, it is that when I write a pfile to the bottom of my spfile and open it with vi, everything looks great. But OK.
apex12D.__data_transfer_cache_size=0 apex12D.__db_cache_size=2030043136 apex12D.__java_pool_size=50331648 apex12D.__large_pool_size=385875968 apex12D.__oracle_base='/usr/local/oracle'#ORACLE_BASE set from environment apex12D.__pga_aggregate_target=536870912 apex12D.__sga_target=3221225472 apex12D.__shared_io_pool_size=150994944 apex12D.__shared_pool_size=570425344 apex12D.__streams_pool_size=16777216 *.audit_file_dest='/usr/local/oracle/admin/apex12D/adump' *.audit_trail='db' *.compatible='12.1.0.2.0' *.control_files='+DATA_QUM169/APEX12D/CONTROLFILE/current.505.898513523','+FRA_QUM169/APEX12D/CONTROLFILE/current.2094.898513525' *.db_block_size=8192 *.db_create_file_dest='+DATA_QUM169' *.db_create_online_log_dest_1='+DATA_QUM169' *.db_create_online_log_dest_2='+FRA_QUM169' *.db_domain='' *.db_name='apex12D' *.db_recovery_file_dest='+FRA_QUM169' *.db_recovery_file_dest_size=10240m *.diagnostic_dest='/usr/local/oracle' *.dispatchers='(PROTOCOL=TCP) (SERVICE=apex12DXDB)' *.local_listener='LISTENER_APEX12D' *.log_archive_dest_1='LOCATION=+FRA_QUM169' *.log_archive_dest_2='LOCATION=+DATA_QUM169' *.log_archive_format='%t_%s_%r.dbf' *.nls_currency='$' *.nls_date_language='GERMAN' *.nls_dual_currency='$' *.nls_iso_currency='GERMANY' *.nls_language='GERMAN' *.nls_territory='GERMANY' *.open_cursors=300 *.pga_aggregate_target=512m *.processes=600 *.recyclebin='OFF' *.remote_login_passwordfile='EXCLUSIVE' *.sga_target=3072m *.undo_tablespace='UNDOTBS1'
The server' http' ADR is configured under the orards user, so I've put this in the .bash_profile:
NLS_LANG=GERMAN_GERMANY.AL32UTF8 export NLS_LANG
The same I did for the root, just for test user, because only root can start tomcat and apache systemctl. Apache and tomcat user/bin/nologin as Bash, so I think that their bash_profile will not if I create a.
But nothing really worked. Can anyone help please?
Thank you and best regards,
DavidHello
good German special characters are agree on the first server in ther, but not the second? I have this behavior when I set NLS_LANG = GERMAN_GERMANY. AL32UTF8 when I install the extension of the German language.
Best regards
Thomas
(Grussle aus Böblingen)
-
Problem with the fonts Textfield and dynamic device Flash CC
Hello community,
My problem is that I need to use for a "Device Fonts" project for dynamic textfields. With Flash CC several standard fonts are displayed not correctly, see photos. When I select "Anti-Aliasing for reading" for this textfield, when it displays the correct police.
Anyone know the problem?
If you want to use Arial Bold, embed (Einbetten..), this police.
If you specify "use device fonts" for anti-aliasing, Arial Bold is prohibited when the published text is displayed.
-
Problem with web fonts not appearing is not in the generation of iOS Phonegap app.
Hi guys,.
I have this problem where InDesign I used in Adobe Edge animate appears not when I build on an iOS device. I try various methods to try to use css to embed fonts with the family of police and the setting class for use with police, but nothing helps. This is thanks to some JavaScript used to define fonts in Adobe Edge animate that I can't seem to overwrite the fonts used?
Someone at - it experience similar problem? need help to solve this problem. !
Hi Elaine,.
Thanks for the link, and I think I found where I was wrong. I should actually put the in the police add embed code to integrate my css file and read the font family from there. And it works on the phonegap build.
Concerning
IMS
-
Problem with special characters loaded from XML
I have a XML with elements that contain special characters (for example: n, N, a, A, etc.), when I load the code XML and do a Trace () the element responsible, I see that it is loaded correctly, but in the text field is not special characters. For example, in the XML file, I have the Bañostext, but in the field indicated text Baos.
It is clear that in the text field consist of uppercase, lowercase, numbers, punctuation symbols, and basic Latin characters.
I also tested with stop System.useCodePage = true in the code, but does not.
Thanks for any help you can give me.
Garchabig.
PD: Sorry for the bad English, I'm Latino. -
embed a font that contains the characters required.
-
Problems with the fonts to display in the preview?
Please I need help fast
I am new to adobe muse, when previewing in my Web site, it displays different fonts or compress my fonts, they become illegible from what I used, I tried to use different fonts and styles, but the problem has persisted, what should I do? The fonts are normal during editing: training programs. I loaded the Web site for testing.
Concerning
Hello
The unreadable text has a tracking (tracking) applied to this negative. It comes from the following style declaration:
li {
letter-spacing: -2px !important;
}
Have you added this to the page
article? For what purpose?Abhishek
Maybe you are looking for
-
12.5.1 ITunes does not sync
I've also updated my IPhone to OS 10.0.2 lasest and ITunes for 12.5.1 and synchronization is now broken. The phone does not even get detected in ITunes, but OS 10 Windows detects the phone in the Device Manager.
-
The new Firefox integrated PDF viewer will not render gradients-shadows created in Adobe InDesign. He replaces it with a gray flat area - any shape he's sitting behind. Y at - it a fix for this problem?
-
I have a hp 110-210 DT I want to change the bios so that when power on the computer starts and starts a program without requiring a password
-
ODBC SQL Server for Solaris 64-bit drivers
Does anyone know if there is a driver available for ODBC SQL Server for Solaris 64 bit server? Thank you CB [edit: moved to SQL Server questions]
-
All security updates stop IE7 to connect to internet
All security update IE7 I install (cumulitive or not) cause IE7 to not be able to connect to the internet. I have uninstall the security update to connect to internet. I have Windows Vista 64, IE7 and Cable internet. I checked for virus several times