All security updates stop IE7 to connect to internet

Similar Questions

• Malware doesn't let me download the security updates, download antivirus or connect to internet Explorer

  I am running windows 7 and it won't let me update all security updates, don't start the program antivirus or connect you to the internet through the Explorer, ovoo, Skype or aol. He worried that connect via internet explore 64-bit only.  When I try to update windowns it cannot be done via the Control Panel then gives me codes as FFFFFFF which I was led to understand is because of malware or a virus.  When I try to download any cleaning of malware, it wonlt I would run them? I tried restoring but it won't work and I can't run most programs.  How can I get rid of this malware?

  Hello
  Try following the steps in this guide to malware removal: http://www.selectrealsecurity.com/malware-removal-guide/
  It contains instructions which will remove most malware infections. I hope this helps you.
  Brian

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• All security updates recent asking me to install fail

  .. can someone give me a hint as to what I should do... Please keep it simple for me, thank you

  • I got the error message 80070490

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Windows Vista and Windows Server 2008

  To resolve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  If the above does not help to your problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows security update blocked me to use my internet, how can I do to solve this?

  I know it's the security updates, because when I restore to a point before the updates, the computer works fine until it updates settled again. Ive ran the diagnostic thingy and it says that Im on the internet and MSN messenger returns its position but its all messed up like the columns are elongated and icons do not work when you click on them. My next step is to take the computer team of geek that will cost me $200.00 cash that I have just to watch.  Any suggestions would be greatly appreciated.

  Desperately yours.

  J. John.

  Change the update settings and see that one is the cause of the problem:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  Mick Murphy - Microsoft partner

• HELP error code: 80072efe - cannot download or install security updates or update the definitions of viruses and spyware

  Help, please!

  I am running Vista Home Premium 32 bit on SP2.

  I just had my McAfee security expires and since I was not able to install security updates.

  I uninstalled McAfee and searched my system to make sure that it is completely gone, then I installed Microsoft Security Essentials.

  I was able to update its definitions of once and since I was not able to do so once again - instead, I get the error message "Virus and Spyware definitions update failed" and the code of error 0x80072efe

  I have since run a full scan of the system and the following were found on my system:

  -Trojan Dropper

  -Trojan notifier

  -Trojan Downloader

  -Virus: Win32/Alureon.H

  It is said that they have been removed - I'm not sure if they have something to do with my problems of system...

  Also my windows update still does not go to download security updates, and it still gives me the same error code.

  Is there a way to fix this?

  Thank you very much

  Also, the first update failed installed has been updated for Windows Vista (KB955430)

  The last successful security update was security update for Windows Vista (KB979309)

  The one who follows - update security for Windows Vista (KB978338) failed and there all security updates do not have

  I just had my McAfee security expire... I installed Microsoft Security Essentials.

  You should have uninstalled the McAfee application and download / run the tool to remove McAfee Consumer product and then installed Microsoft Security Essentials before as your McAfee subscription has expired.

  See...

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code 646 trying install security update

  When I tried to installed the recommended security update, stop the process and displays the error code 646.

  Windows vista

  Update for 2007 Microsoft Office System (KB981715)

  I have run the Microsoft diagnostic and solve some problems, but I can install the update.

  ·
  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  Mick Murphy - Microsoft partner

• How long to keep the security updates?

  Each security update is stored on my hard drive. What I need to keep or are just executable files that can be emptied after the installation?

  Hi bobsleigh pilot,.

  You must keep all security updates are offered by Windows Update. These updates are provided for more security of the computer and it is recommended that you do not remove all the files associated with the windows updates.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Has no security updates - unknown error

  Original title: can someone help me with the update failed

  I have windows vista premium 32 bit and for some time when installing all security updates updates do not settle, I get (cannot install due to an unknown error) error codes can someone help me with the means to resolve this please!

  Hello

  (1) update that you are trying to install?

  (2) what is the exact error code that you get?

  Method 1: check the history update for update failure and we provide the article for the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 2: Try a clean boot and install updates

  Clean boot

  How to configure Windows Vista to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: If the updates fail then download by going to the Microsoft site and enter the KB with the number that can't be updated manually.

  Microsoft Download Center

  http://www.Microsoft.com/en-us/download/default.aspx

  If you still have questions then you can follow the link below.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• How to get rid of the Windows Server Post-Setup security updates after deployment of the model

  Hello

  I installed w2003 from zero, configured and set as much as I could. When I rebooted the VM, it is online and ready to use. I converted it to the model. I've implemented the following personalization settings:

  & lt; ConfigRoot & gt;

  & lt; _Type & gt; Vim. CustomizationSpecItem & lt; / _type & gt;

  & lt; Info & gt;

  & lt; _Type & gt; Vim CustomizationSpecInfo & lt; / _type & gt;

  & lt; changeVersion & gt; 1245322835 & lt; / changeVersion & gt;

  & lt; Description / & gt;

  & lt; lastUpdateTime & gt; 2009-06-18 T 11: 00:35Z & lt; / lastUpdateTime & gt;

  & lt; name & gt; 2003 & lt; / name & gt;.

  & lt; Type & gt; Windows & lt; / type & gt;

  & lt; / info & gt;

  & lt; spec & gt;

  & lt; _Type & gt; vim.vm.customization.Specification & lt; / _type & gt;

  & lt; globalIPSettings & gt;

  & lt; _Type & gt; vim.vm.customization.GlobalIPSettings & lt; / _type & gt;

  & lt; / globalIPSettings & gt;

  & lt; identity & gt;

  & lt; _Type & gt; vim.vm.customization.Sysprep & lt; / _type & gt;

  & lt; guiUnattended & gt;

  & lt; _Type & gt; vim.vm.customization.GuiUnattended & lt; / _type & gt;

  & lt; autoLogon & gt; true & lt; / Autologon & gt;

  & lt; autoLogonCount & gt; 2 & lt; / autoLogonCount & gt;

  & lt; password & gt;

  & lt; _Type & gt; vim.vm.customization.Password & lt; / _type & gt;

  & lt; clear & gt; false & lt; / plain text & gt;

  & lt; value & gt; XXXXXX & lt; / value & gt;

  & lt; / password & gt;

  & lt; time zone & gt; 85 & lt; / time zone & gt;

  & lt; / guiUnattended & gt;

  & lt; identification & gt;

  & lt; _Type & gt; vim.vm.customization.Identification & lt; / _type & gt;

  & lt; joinWorkgroup & gt; WORKING group & lt; / joinWorkgroup & gt;

  & lt; / identification & gt;

  & lt; licenseFilePrintData & gt;

  & lt; _Type & gt; vim.vm.customization.LicenseFilePrintData & lt; / _type & gt;

  & lt; autoMode & gt; perSeat & lt; / autoMode & gt;

  & lt; / licenseFilePrintData & gt;

  & lt; userData & gt;

  & lt; _Type & gt; vim.vm.customization.UserData & lt; / _type & gt;

  & lt; computerName & gt;

  & lt; _Type & gt; vim.vm.customization.VirtualMachineNameGenerator & lt; / _type & gt;

  & lt; / computer_name & gt;

  & lt; fullName & gt; XXX & lt; / fullName & gt;

  & lt; orgName & gt; XXX & lt; / orgName & gt;

  & lt; productId & gt; XXXXXXXXXXXXX & lt; / productId & gt;

  & lt; / userData & gt;

  & lt; / identity & gt;

  & lt; nicSettingMap & gt;

  & lt; _length & gt; 1 & lt; / _length & gt;

  & lt; _Type & gt; vim.vm.customization.AdapterMapping [] & lt; / _type & gt;

  & lt; e id = "0" & gt;

  & lt; _Type & gt; vim.vm.customization.AdapterMapping & lt; / _type & gt;

  & lt; adapter & gt;

  & lt; _Type & gt; vim.vm.customization.IPSettings & lt; / _type & gt;

  & lt; dnsServerList & gt;

  & lt; _length & gt; 2 & lt; / _length & gt;

  & lt; _Type & gt; String [] & lt; / _type & gt;

  & lt; e id = "0" & gt; XXXXXX & lt; /e & gt;

  & lt; e ID = '1' & gt; XXXXXXX & lt; /e & gt;

  & lt; / dnsServerList & gt;

  & lt; Gateway & gt;

  & lt; _length & gt; 2 & lt; / _length & gt;

  & lt; _Type & gt; String [] & lt; / _type & gt;

  & lt; e id = "0" & gt; X.X.X.X & lt; /e & gt;

  & lt; e id = "1" / & gt;

  & lt; / Gateway & gt;

  & lt; IP & gt;

  & lt; _Type & gt; vim.vm.customization.UnknownIpGenerator & lt; / _type & gt;

  & lt; /IP & gt;

  & lt; primaryWINS / & gt;

  & lt; secondaryWINS / & gt;

  & lt; subnetMask & gt; 255.255.255.0 & lt; / subnetMask & gt;

  & lt; / adapter & gt;

  & lt; /e & gt;

  & lt; / nicSettingMap & gt;

  & lt; options & gt;

  & lt; _Type & gt; vim.vm.customization.WinOptions & lt; / _type & gt;

  & lt; changeSID & gt; true & lt; / changeSID & gt;

  & lt; deleteAccounts & gt; false & lt; / deleteAccounts & gt;

  & lt; / options & gt;

  & lt; / spec & gt;

  & lt; / ConfigRoot & gt;

  everything's fine, the virtual machine gets deployed perfectly, with the 1 question, it ends with

  

  all security updates have been installed on the original vm (the one I did the model from) and the automatic updates on. The problem is obvious... Deployment + customization allows you to deploy the virtual machine in a few clicks without interacting with the operating system, but now I have to go and click on the Finish button for the virtual machine online. Does anyone have a quick remedy for that? Thank you

  You must create a key in the Windows registry.

  See:

  http://TechNet.Microsoft.com/en-us/library/cc757061 (WS.10) .aspx

  André

• Satellite C50D - B - 11 X more difficult to connect to internet

  Hello

  I have a Toshiba Satellite C50D - B - 11 portable X. He was about 6 months, and had nothing but problems from day one. Really wish id increased for the next. But stuck with it now.

  I have internet wifi which is very fast and reliable in my area. However as the months have passed, the laptop has gone in and out of the internet reception and is gradually degraded.

  All of a sudden does not connect to internet, sometimes for a few minutes, but which a strung out to several hours sometimes now. I went on the site of toshiba and updated all my drivers etc.

  And I was using aid cable directly from the internet area of sky to the portable computer, which worked a treat for a few weeks but now is doing the same thing. Internet works for a little while, then refuses to do anything. Said that there is no internet connection at all times. But there isn't...

  There is absolutely no problem with the internet, im typing this on my work laptop partners that is connected via wifi and NEVER has problems with internet, works perfect contiouusly and still works 100% even if my lapop Toshiba immediately next to it has a fit of anger.

  What can I do?
  If anyone can help?

  Thanks in advance

  Hello

  Can you confirm that the problem of internet connection is displayed using LAN and WLan connection?

  Have you tried to connect this laptop to another WiFi in your area? IE test connectivity in relationship with the neighbour s WLan.

  In case you have the same problem with LAN and WLan, I think only one kind of software (some of the antivirus or security settings) which is always preinstall on this laptop could cause the problem.

  In my opinion, you should recover the laptop back to factory settings and should test the functionality of the laptop once more without any 3rd software installation part.

  Check the internet connection by using different browsers like IE, Firefox and Chrome.

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Pavilion series 6, P6 - 2220t: HP Pavilion P6 - 2220t. All security USB connections are turned off in the BIOS. Need to turn it on.

  I was told that all security USB connections is disabled in the BIOS. The only controls for this PC is USB ports for mouse and keyboard control ect.  How can I get into the bios without keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is only the USB connections. Again, if I can get somehow get into the BIOS I can enable security USB connections as it should.

  UPDATE,

  Fixed a problem.

  I have install a market after card bipassing USB bios usb connections.  I went in the BIOS and turned on USB connections. I figured out the EASY DIFFICULTY and solved the problem myself. No other technology needed in this case.

  Very EASY SOLUTION!

  Thank you

• Impossible update/security update (MSFT XML Core Services 4.0 SP2) or install Office 2010 (trial/beta) - message common all the way through; HRESULT: 0X800736FD

  Impossible update/security update (MSFT XML Core Services 4.0 SP2) or install Office 2010 (trial/beta) - message common all the way through; HRESULT: 0X800736FD.

  I just got this computer, it came with XP installed but Win7 Pro OA... I installed Win7 immediately. The CS XML 4 SP2 update/security updates do not have continually. Is this related as sharing the same code HRESULT? Moreover, trial version of Office 2007 have installed now. Cannot update with Office 2007 Service Pack 2.

  Would be very grateful for the help! ~ Joe

  I don't have any security/antivirus suite & have the firewall off the coast.

  I see.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) and before using a player flash or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Good luck!

• Vista security updates cause IE does not connect to internet

  x 2 last month, when I ran the Vista security updates, I have been unable to get to all the websites with IE8.  I have a connection to the internet, but IE will not connect to all websites.

  This is a laptop and I am currently wireless, however I had the first problem with updates when wired, then, happens to be it.  I have to go and uninstall updates of security one at a time until I have found the culprit.  This time it was KB974571, the last time it was KB972260.  I disabled updates now because I'm tired of this.

  I am completely disgusted with Vista.  MS should provide XP for anyone wishing to revisit it, for free.  I'd be at the front of the line

  If somebody can tellme why security updates would cause this problem, I would appreciate it.

  Thank you

  Hello

  Other methods should also resolve the problem if needed.

  Your product code must be on the CD/DVD provided with the device or back/under the computer.

  If this isn't the case, they will find it for you. These are not cracks - they find your product key on your machine.

  Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  Magic Jellybean Product Key Finder see Web site for many products.
  http://magicaljellybean.com/KeyFinder/

  Finder Windows product keys
  http://www.rjlsoftware.com/software/utility/winproductkey/

  Window Vista and product keys Microsoft Office - WinGuggle
  http://unlockforus.blogspot.com/2008/01/WinGuggle-get-your-Windows-Vista.html

  How to see the Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.