Problems with the Android SDK 23.0.5 and EPCO

Similar Questions

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• Problem with the new sdk 1.0.1

  I installed the new 1.0.1 sdk integration with Flex hero blackberry playbook. Not able to install BT Simulator... In the getting started guide that they mentioned on open option virtual machine instead of creating the virtual machine. I did not understand what... someone can tell me a detailed description to this topic?

  Thank you...

  A tilt on another thread.

  Take the old sdk folder and move it elsewhere.  Then when you reposition to 1.0.1 it won't try to always get a 0.9. Version.  It worked for my mistake, which was the same as yours.

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• Problem with the Cisco ASA 5525 X SFR and Firesight high school

  Hi team,

  We have two ASA 5525 X installed on them and Firesight in a Linux VM whose two SFRs are registered with SFR failover mode. We use the SAA secondary off the hook if the primary fails to turn on the secondary manually switch the wan cable. I turn on the ASA secondary every weekend to take the configuration of the primary for the ASA and the SFR and close by button walk / stop.

  Last week I turn on high school ASA and the Firesight couldn't see the secondary SFR and show the message below:

  Module device heartbeat: device > don't send heartbeats.

  (I should mention I can Pinger the IP ADDRESS)

  I tried to study the problem without success.

  I also deleted the sensor just Firesight devices management in case something is stuck, and I'm trying to re added without success.

  I'm new in firepower so... any ideas?

  Thank you

  Finally, this problem has been resolved by the redefinition of firepower:

  see detailed here procedure to perform this redefinition;

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  Before that, it appeared that firepower was not very healthy:

  After a success "" configure Manager add xxxxx"command.

  the command of managers show show nothing;

  He should have shown this result:

  > Display managers
  Host: 193.193.2.75
  Registration key: AZERTY
  Inscription: pending
  State of the PRC:

  on the other hand, in expert mode, the following command shows several processes (and not in the normal state):

  sudo pmtool status | grep-i down

  Last point,

  After the recreation and reconfigure all this fire power, installed in the ASA secondary standby, was considered to be OK under Firesight health Monitor,.

  but after 10mins, it appeared in critical condition with the following message:

  "Interface"DataPlaneInterface0"receives not all packages.

  This is normal and due to the fact that Eve ASA receives no flow and the same goes for firepower inside this ASA;

  by performing a failover from the primary to the secondary ASA, this critical message disappeared for firepower inside the ASA Sec and appeared for firepower inside the ASA elementary school

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with the fb sdk

  I m getting this error when you use the sdk to fb

  {'error': {'type': 'OAuthException', 'message': ' access not valid token spray [0,0] ure. "}}

  can someone tell me who is, and how it can be removed

  It has been resolved somehow... I think that the problem was not asking some permit before it has been used.

• Eclipse problems with the plugin SDK installation - please help

  You have a new PC.  Yes for me.  Installed the new Eclipse + BB JDK of this site.  There is no option for BlackBerry projects when I run Eclipse.

  When I import my old PC projects, there are tons of red x in them.

  If I go to software updates, it shows 1.1 plugin and v5 SDK * is * installed.

  Something simple, I'm sure.

  I have not installed Java SDK 6 real.  Although he does not tell you which at the time.  He moved very well, it just doesn't work.

  I have installed the Java SDK6 and reinstalled and it worked.  Thank you, Mark.

• Problem with the Android app

  An article of my folio should show a PDF, there is the link to that file in the context of Web content. In iOS, everything works fine, but Android devices do not show the file! Android native applications can show pdf files in Web Content?

  And is it possible to display pdf files in Android using another way?

  Let's take this offline for now - will send you a PM

• How to solve the problem with the Gmail password that worked before and works online?

  1 thunderbird worked very well with my Gmail account for months, then was unable to send a message, but can still receive messages.
  2. I asked me to re-enter my password and it has not fixed the problem.
  3. I went to Gmail online and connected to verify that my password has not changed. Success.
  4. I have reset password in Thunderbird, but still could not send test message to myself.
  5. I deleted the account in Thunderbird. I then added a different Gmail acct that wasn't in Tbird. Success. Then I sent the test email, success.
  6 then I added the original Gmail acct, failure! He finds the correct settings automatically, but when he tried to check the password, it failed. I repeated to enter the password several times but always failed.
  7 WIN7 64 bit HP, Tbird 24.4.0
  8. all other AOL accounts work fine on Tbird.

  Authentication using two-factor with this account? and ask for passwords? as it seems!

• Problem with the commissioning of Web check-in and ASK when swicht to the TMS Provisioning extend mode

  Hi, I need help please, because I have no contract and I cannot open a TAC case.

  I have the following two issues:

  1. when I do the tms extension preparation mode switch as stop working sip calls, I get the following error of internal and internet scenarios for my internal network:

  VCS-e when the call is the Internet to the internal network

  2013-09 - 05T 11: 50:38 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

  VCS - c when the call is internal network to the Internet:

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

  2013-09 - 05T 11: 53:23 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

  BUT WHEN THE MODE IS AGENT LEGACY TMS ALL THE CALL WORKS FINE

  2 when I switch I can tms mode of preparation I can do internal network equipment supply but not from the outside and this worries me more is the jabber that being Internet I get the following error:

  013 09 - 05 T 11: 07:42 - 04:30	"" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"
  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
  SIPMSG:
  | SIP/2.0 401 Unauthorized
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  To: ; tag = ba0e03ca2f6b3957
  Server: TANDBERG/4120 (X7.2.1)
  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
  SIPMSG:
  | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  TO:
  Max-Forwards: 0
  User-Agent: TANDBERG/4120 (X7.2.1)
  Support: com.tandberg.vcs.resourceusage
  Content-Type: text/xml
  Content-Length: 250

  25075024960|

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
  SIPMSG:
  | SIP/2.0 404 not found
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />; tag = c4114db76ace49d8
  Server: TANDBERG/4120 (X7.2.1)
  WARNING: 200.11.230.253:5060 399 'political response '.
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
  SIPMSG:
  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  Contact: <> [email protected]/ * /: 2379; transport = tcp >
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />
  Max-Forwards: 70
  Directions:
  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
  Expires: 300
  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
  Accept: application/pidf + xml
  Content-Length: 0

  The setup I have is:

  

  Configuration on VCS Expressway:

  TMS Agent Legacy mode

  Search rule:

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  Search for DNS zone rule

  Any

  AllZones

  NO.

  Alias matching

  Regex

  (?. *@%localdomains%.*$).*)

  Leave

  Continue

  DNSZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  Presence PUA - on

  Presence server - off

  CONTROL VCS:

  TMS Extension commissioning of fashion

  Search rule

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  External IP address search rule

  Any

  Any

  NO.

  Any IP address

  Continue

  TraversalZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  PUA - on

  presence server - on

  I do not have political appeal hace

  Please help me to see what I'm missing or what's wrong?

  Thankss

  Hello

  Ok. Are you saying that VCSe uses the IP address 10.10.10.10 in interface external, right? Of course, what the IP address of 200.x.x.x? It's your VCSe NAT IP address, right? What is this configured in VCSe?

  Well, reaally you have a problem of NAT. look at the SUBSCRIPTION message of jabber to VCSe:

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TCP 201.210.116.201:3612; branch = z9hG4bK138dca6bf6cdd458588900dbaf7b45f4.1; received = 10.10.10.1; rport = 9368

  Call ID: [email protected]/ * /.

  CSeq: 301 SUBSCRIBE

  Contact:

  From: [email protected] / * />; tag = 1e82c817dc3224d5

  In: [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  Do you see? If the Red 192.168.41.205 IP address is the IP address of your router/nat, then you can come to the conclusion that your router is inspection/ALG, it puts its own IP address in the SIP headers. Your router/firewall device should not use any function ALG/inspection, otherwise you will have problems.

  I can say with great confidence, VCSe rejects the message SUBSCRIBE "404 not found" response because VCSE does not recognize this IP address in the field 'road', 192.168.41.205.

  In addition, the configuration of your NAT is not recommended. First, you use the port-based NAT (PAT), in fact, you must use a NAT. Second, when your NAT firewall allows VCSe, the source address is 10.10.10.1, which means that your firewall is NATing the source address and destination address not only. This type of NAT, it is not recommended for h.323/SIP applications.

  Well, don't be angry with me, I try to help, but I need to say, your deployment VCSe is almost completely false, there are a lot of blind spots.

  I suggest reviewing and reconfigure your deployment following this guide:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• problems with the portfolio of construction projects, sync, and URL

  Hello

  I started to build a portfolio (portfolio Adobe) yesterday.

  I met three problems

  Because it took me a lot of work to build the first project (I had to understand it), in order to maintain persistent available, when I started to build my second project, I have simply made a duplicate of the first and replaced content. (is there not a way to save the settings and configuration of a project, that would save a lot of time?)

  to my surprise, however, the URL of this copy was: https://www.MyPortfolio.com/editor/copy-of-premium-shoot-with-Sharon , referring to what the copy of the first project (award-winning shoot with sharon).

  I tried to save this bij changing the slug, but that did not work.

  So, how can I change the URL of the second project?

  This second project is not synchronized with behance (I thought it would be automatic, since the first project was synchronized, but not so much). The question is, how do I sinc, a portfolio AFTER project build in portfolio?

  And the last question: how is it that the 'i' button in the left column (need help) is most of the time does not?

  Thx for helping me here

  Johny

  Hello

  For questions specific to your portfolio, we can help if you have a ticket to the help.myportfolio.com.

• Problems with the opening of links in Safari and mail

  I can't open a link from email or Safari.  I have updated to IOS 9.3, but that did not help or the other.  Anyone else having this problem?

  Many other people if you look at the discussions of the forum. Currently, there is no single solution. Some were lucky, enter settings, safari and the disabling of javascript, but it did not work for all. Others were lucky enough to find and use another browser as a workaround. At the end of the day, it's Apple to release a patch and there is no timetable as to when this happens.