Problems with the "CRM on demand - Outlook integration" when used through Citrix?

Similar Questions

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• Problem with pop up adds and virus warnings when using safari

  I have an iMac with OS version 10.11.4 2011 mid.  Sites that I visit such as Ancestry.com, Google Maps and find A Grave.com, download pop up ads and new tabs open with warnings of virus heading towards various support sites, including those who say that Apple in charge.  The pop up and new tabs who may or may not happen if often the Web sites are very slow to respond at all to give me the turning ball.

  I closed several times tried to solve the problem in closing Safari, turn off my Wifi, then restart safari while pressing the SHIFT key, and then once that Safari has loaded, removing all data from the website and checking my making sure that my security settings is set to block pop-up windows up , and that my privacy is set to allow cookies and data Web site only on Web sites that I visit. Once I did this I activate Wifi.  But it does not clear the problem. I also ran Clamxav with the latest virus definitions that found six files with extensions of .emix that have been found in my emails and phishing files.

  I switched to Firefox as my default browser and have so far not had a problem with the pop adds up or virus alerts.  And the Web sites I visit have been working properly.

  What should I do to clear the problems I am having with Safari?

  August 2015 topic adware detection and removal - https://discussions.apple.com/thread/7184089

  Suggestions September 2015 by stedman1 - https://discussions.apple.com/message/28945970#28945970

  Download and use MalwareBytes

• Problem with the tool pen creating a fill when I want only the stroke

  Hello

  I'm having a problem. I create a simple spider for a project. Initially, I used the pen tool to make the legs. He worked for a bit, then started suddenly in an area that I has yet to draw with the fill color. I don't know what I did to cause this happens. Any help would be appreciated. Thank you

  

  This form shows a yellow fill, probably from the last shape you drew.  If you select the form and clear the fill, your drawing will return to black lines only.

• Problem with the text block, put in place when it is used on the page number marker

  Hello!

  I would use the text block on the marker page number on the master page in Indesign. The text block should change width when increases the page number. It does not work. What happens is that when the number of page moves a two-digit figure, the numbers tightened itself (compressed on top of each other) and the block of text changes size unless I drag on it (which means I have to manually unlock the master page first).

  I'm doing something wrong, or is this a bug?

  Thank you!

  Altogether! So, you can use a rule of Pará to simply do it!

• I get the following error in Outlook Express when using SSL

  "You are connected to the server using a security certificate that could not be verified."

  The certificate CN name does not match the passed value.

  You want to continue using this server? »

  Y/N

  If I say 'Yes', everything works fine, I can receive and send e-mails.
  I use windows XP with Outlook Express 6 (6.00.2900.5512).

  I have an e-mail address that ends with @yahoo.ie
  Incoming mail server is set to pop.mail.yahoo.ie and smtp.mail.yahoo.ie free
  SSL is the required value for 465 leaving and entering 995.

  What could be the problem and the solution?

  Kind regards
  Kiran.

  Just a minor correction.  To use Internet Explorer or control panel | Internet options.  He can't go to tools | Internet in OE options.

  Steve

• I have problems with the mouse and keyboard from freezing when scrolling or by typing

  I have problems to scroll down to a file because everything freezes at some point and it is impossible to read the rest of the article.

  I also experience problems when I try to type as I hit him at the same time letter 3 or 4.

  Could someone help me because I don't know what to do.

  Norman John

  Work through start-up mode minimum troubleshooting to see if a startup program is causing problems.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  If that allows to identify the culprit, something may have slipped beyond Microsoft Security Essentials.

  This scanner. Allow two hours for this execution.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Don

• Problems with the battery drain on iPhone 6

  Hello! This is my first time posting but I had some problems lately with my iPhone while keeping a charge.

  So, this has started to happen a month ago (exactly one year after I bought my iPhone) and my battery drains just exponentially and evacuates it sometimes when I'm not using it and the internet is not on. For example I'll fully my phone until I fall asleep and I'll put it on airplane mode before going to sleep. By the time I wake up, the battery will be down to 60%. I do not use it during this time, I don't get notifications because all data and the internet is disabled. I do not understand why it is empty.

  Anyway, I've taken to the Apple store Genius bar twice now and they have not been able to fix it. They have tried to restore it... I did that before I went to the Apple store, but they decided to do it again and the second time the guy just told me to turn off all the background app refresh or anything I did but it we continue to attract.

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark. It's so boring, but if anyone else has had a similar situation for advice or assistance would be greatly appreciated.

  a4annalisa wrote:

  When I was at the Apple store, they also checked my battery and everything was normal. I got 100 below the number of average cycles since the age of my phone and the battery was in the green at 94%.

  I am really frustrated after two trips to the store person has managed to fix my phone and I have the impression that they will try to coax me to pay for something that won't fix my phone. Also if there is a problem with Apple hardware and nothing of what I've done so why should I pay for it when it started to happen at the level of the one-year mark.

  Yes that is exactly what they are trying to avoid. As you explained that you have visited it there twice to attempt to solve this problem, they could have offered to replace your battery for $79 that with your current battery showing 94% of its original capacity, that would not have done much for you at all.

  Have you been having problems with the reception of your carrier recently, when all this started happening? Were you see 1 or 2 points of service when you used to see 3 or 4? When you have restored your iPhone, you restore it as a new iPhone or restore a backup top later? Just try to refine some possibilities for the continuous emission.

• (Problem with the arrows) Adobe Reader is not working properly

  I have problem with the Adobe Reader plug-in. When I have a tab open with the pdf file, my arrows do not work in other tabs in firefox, only in this tab where it is the open pdf file. Also, I noticed that when you try to use the arrows in the other cards, they are working on a pdf file.

  I am tempted to uninstall and reinstall Adobe Reader, but it does not work. Help, please.

  I solved the problem reinstalling Firefox, because when I turned off Macromedia my pdf file still worked, but the arrows didn't always work. I think it was a problem with the plugin from adobe.

• Problems with the album settings.

  I'm having a problem with the settings of my album. When I "crop" an image to select a background image, I had accidentally selected always use and now I can't change it. Is there a way of?

  In this case, try the settings-applications-all, press 3 dots (settings) and reset the application preferences.

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• Problem with the ObjectListField

  Hello

  I have problems with the method getSelectedIndex() ObjectListField.
  Supposedly, when there is no index selected, it returns-1. But how come it always returns the index of the last element?

  To illustrate, I created my own dialog that has similar functionality to the "device window select" Bluetooth BB application. I have an ObjectListField and a Cancel button. What I did simply, is to change the label of the button to show the selected index. I have attached my sample code below.

  public class MyDialog extends dialog
  {
  private ObjectListField m_list;
  private ButtonField m_btn;

  public MyDialog)
  {
  Super ("Select Device:", null, null, 0, Bitmap.getBitmapResource ("bluetoothIcon.PNG"), Manager.FOCUSABLE);

  m_List = new ObjectListField();
  m_btn = new ButtonField ("Cancel", Field.FIELD_HCENTER);
  m_List.set (new String [] {"first", "second"});

  Add (m_List);
  Add (m_btn);
  }

  protected boolean navigationClick (int status, int time)
  {
  m_btn.setLabel (Integer.ToString (m_List.getSelectedIndex ()));

  Returns true;
  }
  }

  Can someone help me on this problem? Is there something wrong with my code, or is the buggy API? All I want to do is to return an index of-1 if there is no selected item in the list.

  Also, I tried the isFocus() method to check if the list is being concentrated, it always returns false even if the list is OBVIOUSLY being focused. I'm running out of options on how to determine the solution to this problem. Help, please!

  Thank you very much.

  @jacylan - I do not use isFocus() to determine if the ListField is net.  Take a look at the following code, I think that with this, you can force-1 when the ListField is not the point.

      protected boolean navigationClick(int status, int time)
      {
          int selectedIndex = m_list.getSelectedIndex();
          boolean listInFocusOption1 = false;
          if ( this.getLeafFieldWithFocus() == m_list ) {
              listInFocusOption1 = true;
          }
          boolean listInFocusOption2 = false;
          if ( m_list.isFocus() ) {
              listInFocusOption2 = true;
          }
          m_btn.setLabel(Integer.toString(selectedIndex) + ":" + listInFocusOption1 + ":" +listInFocusOption2);
  
          return true;
      }
  

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Problem with the tool of graduation

  I am new to ambient light and found a problem with the graduated filter tool.

  When I select the filter tool of graduation lines come on the screen, but as soon as I release the left button on my mouse, keyboard, the screen becomes a pinkish red color graduated in brands, adjustments do not seem to work when cursors are used the screen rest the pinkish red color. at the time when I press the done button, tick marks disappear and adjustments were carried out. Because of the dominant on the screen during the process of adjusting the color, I can't tell what changes have been made until I come on the mode of treatment. Could you tell me please as I hurt. Thank you.

  You see the overlay to show you which parts of the picture are affected by your graduated filter. You can switch on and outside, by pressing the letter O.

• Problem with the puppet tool

  Hi adobe community.

  I am using the trial version of adobe after effects, but I have one or two big problems with the software:

  1. If I use the puppet tool (I don't know English name) for the two points on the object the program closes!

  2. it is impossible download this plugin: C:\Program Files\Adobe\Adobe after effects CC 2015\Support (Media Core plug-ins)\Common\ImporterWindowsMedia.apm Files\

  Please help me and thanks a lot for the tips

  p.s. I have a pc with windows 10 pro

  Try CC 2014 and see if the problem persists.

  Try CC 2014 will help us see if the problem is in the latest version of AE or on your system in General.

  I have problems with the puppet tool on my Windows 7 CC 2015 machine running.

  If there is a problem with CC 2015, use CC 2014 for a little while. There is a coming update at the end of this month which aims to fix a LOT of bugs.