I have problems with the mouse and keyboard from freezing when scrolling or by typing

Similar Questions

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• I have problems with the mouse on the computer.

  Original title: mouse problems: P

  Hello

  so my friends touch pad stopped working and she asked me to help him in the process called a tech nerd.
  She said that when she plug in a different mouse it works. She and the laptop Acer: Aspire V3 - 471.
  I did some research on the question, but im known for poor research skills. ill keep searching but if anyone knows
  or can help in any way that is very much appreciated.
  Thank you

  A few things to look at:

  1A it was disabled by the keyboard? Most laptops/netbooks computers usually have a keyboard function to activate the touchpad on and outside. On mine its together, but this can vary between brands and models. My Acer classmates (different model to yours) was . There may also be a BIOS option to turn it off, so its worth a quick look, although if he worked and suddenly stopped it is unlikely.

  2 it is in Device Manager? (if a display as icons in the upper-right) (if the display of categories, change icons and repeat)

  It is listed (probably under the mouse and other pointing devices) and work?
  

  If its listed, but disabled, and then click on the [driver] tab. You may need to run Device Manager as 'Administrator' in the opening, then clicking "Run as Administrator".

  If it appears at all, is there any 'other' or 'unknown' devices listed? In that case it probably needs a W7 updated driver installed for it, which should be available on the website of Acer support for your model.
  

  
  

  3 is it listed and enabled in as a "pointer" device tab [buttons]? and if so it is listed as enabled in the [device settings] tab?
  

  
  

  
  

  
  

  
  

  
  

• I have problems with the links and footer

  I have problems with hypertext links (they sparkle and also highlight other text on the page) and also the footer space for always lights in site preview mode, even though I did little master and home page and the following pages.  This happened only after I loaded a file of MUSE in the current version of Muse CC put running up-to-date on the imported file to Muse.  Please help me Adobe Community.

  Once you have opened the file 2014.3 muse you will not be able to open it in a previous version anyway. In order to keep the updated version.

  In this version, Yes, Muse will run an optimization when you open a site. My suggestion is that optimization is made to save the file, so it doesn't have to do it again. I am convinced that a full download should solve your problem. I had a few sites that I need to do a full download myself and all is well.

• Problems with the mouse and the performance in some programs

  While playing through an old game, I open the menu. In the submenu where options are, I don't then click on any one of them with my touch pad or mouse. The little icon lights by detecting that the mouse is over the icon, but it does not click on it. ex-Menu-> solo-> campaign<--This is="" what="" it="" will="" not="" let="" me="" select.="" also="" it="" will="" not="" allow="" me="" to="" click="" on="" desktop="" icons="" which="" is="" very="" confusing.="" i="" can="" scroll="" over="" the="" icons="" same="" as="" the="" menu="" option="" but="" it="" will="" not="" let="" me="" click="" on="" them="" to="" open="" them.="" so="" what="" it="" seems="" is="" that="" i="" can="" get="" into="" folders="" and="" menus="" but="" when="" it="" comes="" to="" actually="" starting="" something="" up="" such="" as="" a="" game="" or="" running="" a="" program="" the="" mouse="" button="" will="" not="" click="" it.="" i="" can="" right="" click="" open="" most="" things="" but="" as="" you="" can="" imagine="" that="" wont="" work="" in="" a="" game.="" if="" that="" make="" sense.="" if="" you="" have="" any="" thoughts="" or="" ideas="" feel="" free="" to="" throw="" them="" out="" because="" i="" cannot="" even="" start="" to="" think="" of="" what="" might="" cause="">

  PS Feel free to send me an e-mail asking questions of system if you think it might help. I am running vista Home premium and have just installed vista service pack 2 for Microsoft update. I believe the problem started about 4-5 days ago when the update and the update for windows defender came around.

  Thank you

  Hello Darko has,

  Have you tried to remove the update that caused this issue again, to see if your mouse goes back to normal?

  Please see the following link for more information on how to do this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Let know us, thanks! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• Problem with the mouse and trackpad

  I bought a MacBook Pro a week ago and am just learning how to use it - took computers from the 1970s, but it's like learning a new language.  New laptop has a memory of 8 GB and 256 GB SSD.

  The touchpad on the laptop is defined the way that Apple prefers - push upward on the trackpad and what is on the screen moves to the top.

  Being very happy with the PC software, I had a life expectancy of the scroll on a mouse wheel to do things in the normal way, but because the creation 'trackpad' and 'mouse' are coupled to the computer, a fixation breaks to another.  I have a Logitech M705 mouse that fits my hand perfectly.  I called Logitech, and even if we got their mouse software installed, it doesn't have a setting to reverse the direction of scrolling.  I found and download software that allows me to "reverse" the scroll wheel button to be and that's what I use now.

  My question is whether El Capitan, or perhaps even Sierra, a tool that allows me to do this without having to use outside software?

  As a follow-up question, can anyone recommend a wireless mouse that is designed to work with the MacBook Bluetooth without having to use a plug in dongle, which takes half of my USB connections?  Preferably something important, which is 'in', not ' under' my hand?

  Hello. Have you tried to navigate to system preferences and the mouse. And uncheck "Natural direction" here.

• Pavilion 550-153NA: allow me to interact with the mouse and keyboard when Windows 7 starts at startup

  Hello

  I am trying to downgrade from Windows 10 in Windows 7. I tried to install Windows 7 but it keeps telling me that "Windows Setup experienced an unexpected error. To install windows, restart the installation. "I rebooted several times, but I still have the error. Then, I tried to install it by starting the drive at startup. All charge very well and the configuration screen appears. But I went to move the mouse, but it should not move. I tried several different mice and keyboards, but there was no hope, both USB 3.0 and 2.0. I did some research and found that you have to enable 'Legacy Support' in the BIOS. I did this, but there was still no movement.

  If someone could apply their knowledge via a comment, it would be very appreciated that I constantly tried since end of December 2015!

  Thank you very much

  I would try this new link.

  __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  Let me know if it works

• Had a virus on the computer, deleted, now I have problems with the homegroup and DSN

  Cause of my current problem:

  2 weeks ago, I found that my computer has a virus. He removed the BFE service, firewall Windows, Windows Defender, blocked my anti-virus (Trend Micro), cut other security services... he pretty well blocked, deleted or close all my computer security programs.

  I was able to fix, but my computer did not work in the same way.

  I was able to return back BFE and Windows Firewall, turn on other security services and get up my antivirus and running. 2 weeks later my antivirus deleted 9 virus and thousand and something web threats.

  Now to my current problem:

  I was able to establish the homegroup on my computer, but when I check the files that I want to share, Save custom settings, same when I go to a folder and select 'share with homegroup' manually

  When I hit Homegroup troubleshooting need to network troubleshooting and I end up getting this error "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding"

  I tried following this threat: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/erroryour-computer-appears-to-be-correctly/aeb7b5df-55ac-456e-aba3-96f9d90898d6

  Did not work. I tried reseting my router and modem but nothing. I can't first homegroup to work if I does not resolve the DNS.

  This problem is probably due to the fact that the virus tried to redirect my DSN to computer hackers, but

  I am running Windows 7 Home Premium 64-bit

  modem: Motorola MIPDSLA

  Router: Cisco Linksys E1000

  any other information needed on my computer please let me know

  Sorry for this post is really long, I tried to summarize as much as I could

  I thank all those who took the time to re-read this threat and decided to help me.

  Although there is a small chance, you may be able to fix this on a service by service method, it is may be easier (and faster) to do a clean install.

  I would also mention that if you got a virus to trend was obviously not a very good job of protecting you.  May want to rethink the installation of malicious software program.

• Problems with the launch and printing from Internet Explorer 10, with updates of Windows Installer and start-up and shutdown of the computer.

  Original title: IE 10 freezes work stoppages and turns off

  I use it is to say 10 since I have a new computer in 2012 have not had problems, but for the last week, if I try to print something from my mail I receive IE has encountered a problem and closes the page and restarts it so go to Mozilla to print, yesterday IE was out completely had to return to Mozilla to get on the web. I have also had problems with my computer do not completely stop or does not start, I get to the part type to password in the and he died, tried to install optional updates in windows and it has not does anyone know what I can do to solve the problem. would really appreciate it

  Hi Mark,

  Have you tried the steps I suggested in the previous posts? If this isn't the case, please try these steps and check if that helps.

  You can also try the steps outlined in the article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Dell PC with Vista having problems with the mouse and the connection to the internet

  I had this departure abt 3 weeks ago - my mouse don't come... I had this pc for abt 2 1/2 years - has had to the technicians on the check abt a year ago - what I take again at a tech or have I not a bad pc?

  * original title - my Dell pc does not connect to the internet without turning off & on several times? *

  Hello

  ·         What security software do you use?

  ·         You receive error message?

  ·         You made changes to your computer recently?

  Method 1

  You can check out the link below and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2

  If you were able to connect in safe mode without any problem, you can try to perform a clean boot to verify if if no third party service does not cause this problem. See this Microsoft article.

  http://support.Microsoft.com/kb/929135

  Concerning

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.