Problems with the drive 3 TB formatting directly in the Time Machine application

Similar Questions

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• I have the problem with the time in my laptop

  Hello everyone,

  I have issue with the time, whenever I stop my laptop for 2-3 hours. He return to date 01/01/2006 12:00 AM

  What should I do?

  Hello

  Did your laptop more than a few years old?

  The symptom you describe occurs when the battery that powers the CMOS BIOS chip wears.

  The CMOS battery is responsible for providing voltage to the CMOS chip so that he remembers actually all parameters, including the time and date, that have been defined.

  Replacing the CMOS battery is pretty simple in a standard OEM desktop PC. Unplug the unit. Open the case locate the quarter size battery. Remove the old battery and replace it with a new one. Plug in power and start the PC and set the time and date and accept the default settings. That's about all there is to it.

  Replacing the CMOS battery in a laptop requires generally a bit of disassembly of sequential parts just to get to the battery. Not all laptops are, but most are like this.

  I recommend that you have the CMOS battery, replaced by a HP authorized repair center.

  Kind regards

  ERICO

• Problem with the Java Web Application

  Hello
  
  I have a web application.
  The web server is in the time zone CST and the DB server in zone PDT.
  When we input a date of the browser say '2011-09-26 + 05:30 ' we who convert in milliseconds and save in DB, which is 1316975400000 for the example above.
  
  When we have to be back the date that we convert milliseconds to date to end of server that is in the time zone PDT and ends in "25/09/2011.
  
  A Solution I found when I did was:
  "To pass a Date and a time zone; Jet lag, we stayed was the time zone by default for the customer. On the side server, we have shaped the date by using the zone passed from the client is not using the server's default time zone. »
  
  Please let me know if it is the ideal solution, or there at - it another way to do it.
  
  It is a general problem and responded to many forums. But still I wanted to check if there is another solution for this.
  
  Thank you

  828549 wrote:
  Please let me know if it is the ideal solution, or there at - it another way to do it.

  Yes: Do not save the zone at all; It simply adds unnecessary objects. And do not convert to milliseconds first. Simply store the date as a SQL Date or Timestamp.

  Java dates, and most date from database, I know, are stored as compensation from a point fixed in time ( same point anywhere in the world) then, unless you use a very obscure (and non-standard) database, the JDBC driver must be able to convert a java.sql.Date in internal format of the database without any problems.

  Then, when you want, just use the normal methods of the db for the display. They will take care to display the correct time for the local time zone.

  Winston

• Is anyone having problems with the Times and the Sunday Times App

  Im having problems loading from the Times and the Sunday Times app. Before I launch into a major description (I have Parkinson's disease, and typing is slow) is there a known issue with the application at the present time

  There has been a lot of problems with this app as soon as they have a clear, the other seems to appear.    Take a look at this link and it followed in areas where you are affected by.

  http://www.thesundaytimes.co.UK/Sto/multimedia/archive/00258/Helpguide_stripped _ _258975a.pdf

• Problem with the time in the calendar

  Hello.

  My problem is that I can't properly store the time in the calendar! What I'm saying.

  I get a date as a String form a JSON (ex: 2010-08-09 15:15) and I analyze! So far so good.

  But when I store an event in the calendar with the date and the time, it is saved as 2010/08/09 18:15 therefore to the time zone of the device. Any ideas how to get the time from string?

  I looked like this:

  public long convertDate (String date){
  
  return HttpDateParser.parse(date);
  
  }
  

  thnx in advance!

  We addressed this issue several times: here's a thread on the subject.

  http://supportforums.BlackBerry.com/T5/Java-development/convert-DateTime-to-user-s-local-DateTime/m-...

• Problems with the time in Windows 7 (64-bit)

  The time on my computer is always off.  Even when I change the time to the exact time in my bios the weather is bad in Windows.  I chose the right time zone, but it's still 6 hours off.

  When I was first troubleshooting I could just sync the clock to the internet through the GUI, but after a reboot or two time, the weather was wrong, once again.  I was looking for something more permanent then I tried things like the time service restarts windows.  I followed these instructions then because this person was having a similar problem.  It was suggested to run these commands:

  net stop w32time

  w32tm /unregister

  w32tm /register

  net start w32time

  w32tm/Resync

  This helped temporarily, but now I have an error the command net stop time w32t.  CMD says "the time service Windows is not started."

  When I go to my services time service Windows is there but not started.  When I try to run it I get this error:

  Here is a picture...

  I hope this is enough information.  Thanks for the help!

  Hi EvanDinelli,

  To resolve this issue, follow these steps:
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  a. Click Start, type regedit in the search box and then click regedit.exe in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  b. Locate the following registry subkey and click on it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv

  (c) in the part of details, right-click ImagePath and then click on edit.

  d. in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\System32\svchost.exe k NetworkService

  Note if NetworkService does not appear in the registry %SystemRoot%\System32\svchost.exe - k NetworkService value, the problem that is described in the "Symptoms" section may occur.
  e. exit the registry editor and then restart the computer.
  Note if you try to start the telephony service before you restart the computer, you may receive the following error message:

  Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

• Problem with the creation and application of models

  For somrthing that seems so simple, I'm having a problem to create and apply a template to a page only.

  First, I created a template as follows:

  1. display a full page (index.html)

  2 choose an editable region by highting the content area of the page. This excluded the header, the menu high horozontal, right bar and footer.

  3. went to 'INSERT'-> model-> editable objects

  4 name of container box editable and click on OK

  5. FILE - > save all

  The purple line was shown around the editable and the tag is displayed in the upper left corner of the combo box.

  I assumed that the combo box has successfully been created.

  Then, I tried to apply the model to a new page by using the following steps:

  1 has opened a new blank page called about.html

  2. went to: EDIT-> model-> apply the page model

  3. selection of the Model dialog box displays and I chose the region to editible (1 illustrated)

  

  4. After selecting the editable area, this displsays error:

  

  Error message reads as follows:

  Some Uea this document have no corresponding regions in the new document

  I tried several times, but I know I have to do something by mistake.

  Can someone help me in learning this task properly. Models seem to be such a powerful thing to use in development with DW.

  Thank you in advance.

  boblan1042

  Try this method:

  * FILE | New > template Page > select model > Create.

  A step by step method that works every time.  Once you familiarize yourself with the help of models, come back and I'll tell you why you receive the path you showed above.

• Problem with the transfer of applications to a new iphone

  My old 5s, new iPhone is 6 s. I got old and the other from backup restore. More than half of the applications do not appear on the new phone, nor do they appear in "not on this iPhone" appearing in the App Store. When I search a certain app I bought with my old phone, I suggested to BUY this new, even though I am connected with the same Apple ID. Is it possible to fix it?

  You can re - download previously purchased items in you log in to the App Store with the Apple ID used to make the purchase, then accessing the purchases tab.

  Due to the technology called App thinning, apps that have been uploaded to iPhone 5s are different from those needed for the iPhone 6 s, so they need to be downloaded again. This should be given automatically, unless you interrupted the process in some way, or does not give it enough time.

• Problem with the multi-Machine Blueprint (KB2132084)

  http://KB.VMware.com/kb/2132084

  What is a cosmetic problem on the reports or critical issue?

  This problem occurs even when we use vRA 7?

  This is cosmetic and not a problem for 7.

  Grant

• Problems with the second machine

  I have an account with creative cloud and CC (2014) CC/PS PS and LR installed on my Macbook Pro. I have the account as on my Imac. However, when I downloaded the software, it shows that all the software are only on a 30 day trial. I can't find any way to activate the software on the second machine. What am I doing wrong please.

  Bazzatee please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to solve the connection error prevents the activation of Adobe Creative Software.

• Problem with the Lenovo A536 applications update.

  Hello, recently applications can not stretch. Can not update of applications like Facebook, Twitter, etc. I'm sorry for the bad English, use translate.google.com. Thanks in advance for your time.

  The problem is resolved. This is discussed in detail https://www.androidpit.com/forum/590684/google-play-store-how-to-fix-play-store-error-403

• problem with the state machine

  Hello! I have a VI to monitor a storage tank. I tried to do by creating a simple state machine that changes the value(on/off) of some faucets based on 2 conditions:

  -When a certain temperature reaches a predetermined value AND its derivative is<0, the="" state="" must="" change="" from="" on="" to="">

  -When some time passes, the State should change from off to on.

  Unfortunately I can't get this working as it never changes state (by example, if I start with him always stay on 'on' and vice versa).

  Could you please tell me what I'm doing wrong? I enclose the screenshots of the 2 States.

  Thank you!

  Sounds like your shift which could not not be wired properly.

• VMware Workstation with ESX3.5u4 - problems with the virtual machines within ESX3.5u4

  Hello world

  I really need a consultation on this one:

  I'm testing ESX3.5.

  As I don't want to buy any material for now I thought it would be a good idea to test ESX3.5 in my computer.

  I used this model to install ESX3.5 in my computer: http://xtravirt.com/node/100

  ESX3.5 works perfektly in workstation.

  The only problem is that if I create a computer virtual within the VM ESX3.5 works very very slow.

  I searched on the VMware Forum for this problem and found that you need Intel VT enabled to speed things up.

  But I think that my "Intel (r) Core (TM) 2 Quad CPU Q9300 @ 2.50 GHz, 2000 MHz" should have Intel VT.

  Does anyone have any ideas why my VMs on esx3.5 within the short slow workstation?

  Thank you all in advance for the help!

  Material used:

  ASUS P5B

  Intel Quad Core Q9300

  3 GB RAM

  Intel PRO/100 S-Serveradapter Ethernet

  According to your log file, the external VM using VT - x.  I'm afraid, it's as fast as your nested VMS are going to get.  While I would qualify as slow or even nested VM performance very slow, I'm not sure I'd go so far as "very very slow."  It is perhaps a matter of perception.

• Problem with the installation of application using the OTA of the Tomcat server

  Hello

  I want to install my server application Tomcat suppose that here is the link to the example

  http://121.00.00.00:8080 / Web JSP project/Myapp.jad

  as he tried the link above in the Blackberry browser I get java.io.IOException as myapp - 1.cod not found...

  I placed the .jar, .jad, .cod in the folder web in the netbeans IDE and deployed in normal Office Internet explore if I click on the file link at the above address .jad opens for download where as Blackberry browser, I get an exception...

  can someone tell me how can I get it in the browser blackberry also...

  Kind regards

  Kiran

  You must only place a .jad and .cod on the server.

  However if .cod exceeds 64 k, it becomes an archive, you'll need to extract all the separate .cod files and place them in the same folder as the original .cod

  For example, you have MyApp.cod. Decompress and extract MyApp - 1.cod, MyApp - 2.cod