I have the problem with the time in my laptop

Similar Questions

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• I have a problem with icloud sharing photos that the photos are NOT sorted by the State but by the date of the transfer (which is very illogical for a trip Album,..)

  Dear all!

  I hope you can help me out here - I have a problem with a picture of icloud sorting in shared albums

  We took pictures to a trip with iphone5s and iphone6 + a Nikon J5 date and time everything is OK

  Loadin was don ewhilst travelling and at home, but the sorting is mixed seems to be loading date

  (even only took pictures of the iphone as a reference)   (all on iOS 9.3.2)

  you know a way the album gets re-sync or software where I could sort the photos in

  and then re - download to get the sorting so that by the time and date of the...

  Thank you very much in advance - it would be a big help (gibbest album with this problem is the honeymoon ;-))

  Shared albums are essentially photo streams. They will always show the photos in the order that add you them to the album.  If you want your photos to appear in a specific order, you must add them to the album individually, one by one, exactly in the order of your choice.  You cannot add all photos in an album at once - which will give unpredictable results.

  For example, to create a new album with your photos.  Then ctrl-click on the album and select "Keep arranged by Date, oldest first" to sort the album.  Now add each photo from the album shared individually.  There will be a lot of work.

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Hello I have a problem with the opening of the e-mails received. FIREFOX is notified of an email I received. When you arrive in the Inbox does not appear emeilul announced. Can you help me? Thanks in advance, with Dan Vatui

  Hello

  I have a problem with opening emails received. FIREFOX is warned of an email I received. When you get into INBOX does not seem emeilul announced. Can you help me?
  With thanks in advance, Dan wadded
  

  Hello

  Please also try after you delete the cache and cookies: Tools (Alt + T) > clear recent history, choose all in the interval of time to clear, Cache , and Cookies in Details and clear now. Recent history of claire

  If the problem persists, please check in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

  Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• I have a problem with the code c0000135 error does anyone have a solution to this

  I have a problem with som kind of virus code c0000135 error anyone has a solution to this

  Hello, masts,

  What were you doing when the error occurred?

  What makes you think that there is a problem with a virus?

  View all content of the message, please.

  During this time:

  Restart your computer and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  While still in safe mode, use this scanner (precaution) free online

  http://housecall.trendmicro.com/

  Restart Windows

  Start > type CMD

  Press ENTER if you are using Windows XP

  If you use Windows Vista or Windows 7, right click on CMD and select run as administrator

  Type the following: sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your Windows installation media if corrupt files are found.  The System File Checker will repair the files if possible.  If it can't, you will have to reinstall Windows

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833/PL

  You can also see this re: same error

  Windows 7 service pack 1 update failed error C0000135-missing sqmapi.dll

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-7-Service-Pack-1-update-failed-error-code/a9e7c803-6443-E011-90B6-1cc1de79d2e2

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• I have a problem with my USB and I need a tool to monitor and diagnose the USB to know what is the problem?

  I have a problem with my USB (after a long time of continuous working it stop working and I need to unplug and re-plug the device), I want a tool to diagnose and remedy?

  You can run this tool:

  http://support.Microsoft.com/mats/Windows_USB_diagnostics/

• I have a problem with the history of Bing. I clear the history and turn it off. Later, when I use bing history is preserved and turns.

  I have a problem with the history of Bing.  I clear the history and turn it off.   Later, when I use bing history is preserved and turns.  How can I keep decommissioned and erased history?  What a Bing, IE8, Microsoft problem?

  Hello

  1. is the question confined to the history of Bing?

  2. what web browser do you use?

  3. If you are using Internet Explorer, which r version of Internet Exploreris installed?

  If you are using Internet Explorer 8, it gives you the option to automatically remove your browsing history each time you quit the browser. The type of data that is deleted is dependent on of which options are checked in the delete browsing history.

  one) to set up IE to delete browsing history on exit first click on the Tools menu, located to the far right of the tab of your browser bar.

  (b) when the drop down menu appears, select Internet Options.

  (c) click the menu Security , located to the far right of the tab of your browser bar. When the drop down menu appears, select the option delete browsing history... .

  (d) the window delete the browsing history should now be visible coming to overlap your main browser window.

  (e) check the options you want to remove and click OK.

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.