Procedure entry point; Cannot be found in the dynamic link library

Similar Questions

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• I can't open most of exe files. An error pops up saying__ (file name) point of entry not found .__The (SHRegGetValueW) procedure entry point is not found in the dynamic link library. SHLWAPI.dll__I cannot open iexp/systemrestore/entry point not found

  I can open my computer in safe mode, open the window well, but at startup I get about 10 error mesg. Rundll/SHLWAPI.dll/ I can not open the help files. System Restore does not open I get the SHLWAPI.dll error. My iexplorer option doesn't corr. My add and remove programs are filled with fix XP and Xp service pack upgrades. Like 50 of them. I can't uninstall anything. If she does about 20 to say that programs that are _____. is not working properly. My iexpl. tell it to run in compatibility mode.
  My system that I use is Microsoft (system files R) windowsXP (R)(Build2600.xpsp2.050301-1526:Service Pack 1) NTFS flight lable isDisk O. I think that I tried to upgrade the victory iexp/6 and 7, but they do not appear in Add or remove programs. I have no more disk for win xp service pack 1. But I have the serial number and the key on the side of the model code. A comp.2002 of the entry door. My Mc Update.exe is missing or corr. load (Newdev.dll) RUNDLL error. I can not access my user accounts. or my device manager. What happens with my computer is - anyone KNOW?

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• installed the plug-in for adobe cs4 3rd part. When I open the plugin I get an error saying _CFBundleCopyFileTypeForFileData of procedure entry point is not found in the dynamic library CoreFoundation.dll. This can be corrected?

  Adobe photoshop cs4 with 3d invigorator plugin zexworks

  Hi brush jamie.

  Welcome to the Microsoft Answers site!

  You may need to contact the Support from Adobe to see if they have a fix for it. Follow the link below the disclaimer to access using Adobe:

  http://www.Adobe.com/support/

  Hope this information was useful.
   
  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us

  know what you think.

  NOT MS. LINK:
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  When I develop a way of debugging the program. The procedure entry point PowerEnumerate be found in the POWPROF.dll dynamic link library.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• the procedure entry point ARCCON_GetConnectMRASetting be found in the dtnamic ArcCon.dll library.

  the procedure entry point ARCCON_GetConnectMRASetting be found in the dtnamic ArcCon.dll library.

  How can I erase this on my desk. Newbie here.

  I don't mean to install Windows 8

  Hi irishmama,

  • What ArcSoft program you try to uninstall?
  • Have you tried all the steps mentioned in the previous post?

  If you have tried all the steps mentioned in the previous post, then try the step below.

  I suggest that re-download you and install the program and try again later to uninstall.

  You can also try post your query in the forums of ArcSoft.

  http://www.arcsoft.com/forum/default.asp

• The "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll.

  I try to run Rosetta Stone software, however whenever I click on the application link (or shortcut) this annoying message keeps popping up that, according to the "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll. I studied this before, and there seems to be a problem with Apple/iTunes. But when I deleted iTunes, this question always arises. If there is someone out there or in the it Department which can be useful with this question please help!

  Thank you in advance!

  Hello

  1. are you able to launch the program?

  2. What is the version of iTunes installed on your computer?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit to uninstall iTunes and check.

  See the link.

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  Copy the file in the Common Files\Apple\Apple Application Support folder in the Common Apple Mobile Device Support folder and check if it works very well.

• Error starting NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll. "

  Original title: meaning of the Error Message?

  I get the following message every time I open my Windows XP that mean? and how to fix it?  "The procedure entry point? "NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll."

  Hi Peach14,

  ·         Have you made changes on the computer before this problem?

  Start the computer in safe mode and check if the problem persists.

  http://support.Microsoft.com/kb/315222

  If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

• "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

  I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

  I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

  I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

  "Method 1:

  To resolve this problem in Internet Explorer, follow these steps:

  a. Quit all programs that are running.

  b. Click Start and then click Run.

  c. type regsvr32 urlmon.dll, and then click OK.

  d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

  ('DllRegisterServer in urlmon.dll' received successful)

  If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

  ·         Shdocvw.dll (failed)

  ·         Actxprxy.dll (failed)

  ·         Oleaut32.dll (failed)

  ·         Mshtml.dll (received no response)

  ·         Browseui.dll (failed)

  ·         Shell32.dll (managed)

  Method (step 2):

  I suggest you to start in safe mode and test the question.

  Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method (step 3):

  I suggest you perform a SFC Scan and check if it helps.

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

  (SFC Scan completed successfully)

  Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

  DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

  http://1drv.Ms/11PQ3dm

  I hope this will help you to find me a solution to my problem.

  First of all lets run a startup repair.

  This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

  After return from the logs generated.

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

• The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  I get this error when trying to open Samsung Kies 3 after the new facility:

  The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

  I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

  -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

  -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

  -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

  -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

  The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

  If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

  Other thoughts on how to fix this?

  Windows: Windows 7 Enterprise Edition, Service Pack 1

  Kies 3 Installer: Version 3.2.14083.9

  I get this error when trying to open Samsung Kies 3 after the new facility:

  The 12404 ordinal not found in the dynamic link library mfc90u.dll.

  This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

  I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

  -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

  -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

  -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

  -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

  The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

  If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

  Other thoughts on how to fix this?

  Windows: Windows 7 Enterprise Edition, Service Pack 1

  Kies 3 Installer: Version 3.2.14083.9

  Installation under pakage will solve the problem

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d5692ce4-Adad-4000-abfe-64628a267ef0&displaylang=en

• the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  Hello

  (I hope) a brief history of my problem:

  I am running Windows 7 Professional (64 bit) on a VM (VirtualBox software) on my computer of Linux Mint.  I tried to run a program called Filemaker Pro Runtime, (name of original file FMPROR. EXE.  First of all, I get the error "the side to side configuration is incorrect" and after a few hours of internet browsing, checking the logs etc, I found that I had to install Visual C++ Runtime (x 86, 2008 version) that I found and installed.  Only concern was the page I have d/led (which was a Microsoft page) does not mention Win 7 system requirements - I have tried to find a version for Win7, but a search increase no relevant results.  So I installed the version I found, by Windows XP, Win Server and Vista (I think it may have been an old page).  This seemed to fix the side-by-side configuration error, but now I get the error:

  the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  I tried a search on the web using the above string, but the closest results, mentioning only a .dll ordinal and various different seemed not really relevant.

  I would be very grateful if someone could help me find the required information fix it, score at least me to a Web page that will help me to understand.  I'm not a geek, but I'm pretty OK with research and implementation of aid on the web, but this time, I'm confused as to how to proceed.

  Thank you very much in advance for any help received

  See you soon

  Ricky Walker

  Hello

  Version of Windows 7

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26368

  See if that helps.

• Error message "the 421 ordinal not found in the dynamic link library urlmon.dll" whenever I start my computer

  Original title: 421 ordinal could not be located in the dynamic link library urlmon.dll

  I get this error every time I start my computer: "the 421 ordinal not found in the dynamic link library urlmon.dll.

  In the control panel select Problem Reports and Solutions (problem of type in)
  The START searchbox), go to the history of the problem, your mistake right click and choose
  Check the Solution.
   
  In administrative tools, choose the reliability and performance monitor and
  Click on MonitoringTools then the reliability monitor (type of reliability in research
  at startup). This list is a chart of the software installs, uninstalls, Windows
  updates and crashes by date. See if your plant started to occur after
  you installed or uninstalled something.
   
  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
  --
  ..
  --
  "Mr_Xtatic" wrote in message news: 63562fcd-7837-420-b-84e0-854170dfae5c...
  > I get this message error everytime I start my computer: "the ordinal 421.
  "> could not be located in the dynamic link library urlmon.dll"
   
   

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.