Xbox cannot obtain an IP address

Similar Questions

• BlackBerry Bold 9900 smartphones cannot obtain an IP address

  Hello

  I have a problem with the WiFi on my Bold 9900. I connect the WIFI but it fail to obtain an IP address and he done this for each connection, even for those already registered in my regard.

  Does anyone have a solution or an idea to fix it?

  Thank you

  Mary

  Yes, precisely. Enter an IP address.

  On your PC open cmd command prompt and type ipconfig/all to get an idea of what is a valid IP address

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• Windows 7 - cannot get the IP address of the DHCP Linux server

  I have several desktop computers and portable computers that have the Windows 7 operating system.  Some have Windows 7 Starter, Windows 7 Home and Windows 7 Professional.

  My network is configured like this:

  Desktop computers > switch > DHCP Linux server > router > Internet

  Laptops > wireless bridge > DHCP Linux server > router > Internet

  Windows 7 Professional does not appear to have a problem with my set up.  It can enter an address IPv4 automatically, wired or wireless.

  Windows 7 Starter and Home cannot obtain address IPv4 correctly, wired or wireless.  If I give the static addresses of these computers, they can access the internet.  If I let them as dynamic, they will constantly try to connect and try to Identifingtwork.

  I want to get my Windows 7 start and home computers to enter dynamic IPv4 addresses of my Linux DHCP server.  Note, I have never had any problem with Windows XP Home or Pro.

  Hello
  
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Windows 7 networking forum.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• World of Warcraft continues displaying this message on Windows 7 Toshiba laptop "Launcher cannot obtain patching information. Please check your Internet Configuration. »

  Whenever I try to launch the game from 07:15 1/11/2011 (today), it keeps displaying the message that the Launcher cannot obtain patching of information and to check my internet configuration. I don't know how to do that or why this problem exists. I just play yesterday evening and it has worked well up to this point.

  We will be performing scheduled maintenance on Tuesday, January 11. Maintenance will begin at 3:00 AM PST and ends at about 11:00 AM PST. Meanwhile, all the kingdoms and many web services will be unavailable.

  It's forums

• Cannot renew my IP address

  I can't access the internet because when you run the Wireless Network Connect repair, the repair fails because it cannot renew my IP address. Other computers and phones connest to my network home wireless without any problem, so I know it's not the router. I also tried disabling the adapter USB of Belkin Wirelsss and change USB ports. I run services.msc and ensured that the Client DNS, the DHCP Client and the remote procedure call (RPC) are set to automatic, which they are. Short to take a hammer him, is it anythinig else I can do?

  I have a Dell PC running Windows XP.

  Thank you very much

  Ok

  Thanks for this info. Now, I can rule out certain possibilities for your problems. so, back to my first reply, have you tried all the troubleshooting proposed it? If so, what were the results?

  I'm not familiar with the Belkin software so it is easier for me to work with Windows Wireless Zero. Although the Wireless Zero service can be started, it does not mean that it is used, and if the Belkin software is active, it probably isn't. the first thing to do is to find the setting in the Belkin software that controls this. If you do not find this setting, then my suggestion is to uninstall all software from Belkin and re - install but only install the drivers. In addition, search for a guest on the way in which you want to control the adapter (Belkin or Windows) installation.

  Just reply with the results of my original suggestions. If you have problems made me know what they are.

  A suggestion, signal strength can sometimes be misleading. If it is not already in the same room can you move the router to make it and see if your Belkin connect? Currently, there is no need to worry to get internet access, only to get a wireless connection, so the physical connection to the telephone line is not important.

  Tricky

• Cannot send to multiple addresses with outlook express

  Cannot send to multiple addresses with outlook express

  Hello
  even if you weren't too fourth to come up with more details on this issue, guide for the question on Outlook express here.
  If you have more specific questions, please include more details.
  http://support.Microsoft.com/kb/835830
  B Eddie

• Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix

  Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?

  It seems much more likely that the fault is in your TG782T on Windows.

  Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections.  It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems.  It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.

  Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP."  What is "this setting of intellectual property?

  In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured?  Normally, it would set on "Obtain an IP address automatically."  What was the setting of 'alternative' that your ISP you are trying?

  The first thing to do is to get information on your work computer.  Follow these steps:

  1. click on start, and then type the three letters cmd in the run box, and then click OK.
  2. Enter the following command and press ENTER:
  ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
  3. open the IP.txt file to your desktop
  4. copy and paste the text into your response.

  One of the lines in IP.txt will be something like the following:

  ... Default gateway. : 192.168.1.254

  This number is the IP address of your router.  Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.

  At this point, it is possible that it will ask you a user name and password.  If you did not one, use admin as username and leave the password empty box.  If this does not work, there is a way around this, but it involves several phone calls from your ISP.

  Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978

  After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner).  Click on the entry for "Home Network."  Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility.  What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).

  Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg

  Under the Network Configuration, the local IP address is set to 192.168.1.1.  On your router, the default value for this entry is 192.168.1.254.  Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users."  Here are the settings that you want to search.  The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).

  Sorry I can't give you more specific instructions.  Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.

• The VPN Clients cannot access any internal address

  Without a doubt need help from an expert on this one...

  Attempting to define a client access on an ASA 5520 VPN that was used only as a

  Firewall so far. The ASA has been recently updated to Version 7.2 (4).

  Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot

  ping any address on internal networks, or even the inside interface of the ASA.

  (I hope) Relevant details:

  (1) the tunnel seems to be upward. Customers are the authenticated by the SAA and

  are able to connect.

  (2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it

  appears that the packets are décapsulés and decrypted, but NOT encapsulated or

  encrypted (see the output of "sh crypto ipsec his ' home).

  (3) by the other related posts, we've added commands associated with inversion of NAT (crypto

  ISAKMP nat-traversal 20

  crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our

  Configuration.

  (4) we tried encapsulation TCP and UDP encapsulation with experimental client

  profiles: same result in both cases.

  (5) if I (attempt) ping to an internal IP address of the connected customer, the

  real-time log entries ASA show the installation and dismantling of the ICMP requests to the

  the inner target customer.

  (6) the capture of packets to the internal address (one that we try to do a ping of the)

  VPN client) shows that the ICMP request has been received and answered. (See attachment

  shooting).

  (7) our goal is to create about 10 VPN client of different profiles, each with

  different combinations of access to the internal VLAN or DMZ VLAN. We do not have

  preferences for the type of encryption or method, as long as it is safe and it works: that

  said, do not hesitate to recommend a different approach altogether.

  We have tried everything we can think of, so any help or advice would be greatly

  Sanitized the ASA configuration is also attached.

  appreciated!

  Thank you!

  It should be the last step :)

  on 6509

  IP route 172.16.100.0 255.255.255.0 172.16.20.2

  and ASA

  no road inside 172.16.40.0 255.255.255.0 172.16.20.2

• H - REAP: difficulty to obtain the IP address for the client after loss of control

  Hello

  I have configured the following:

  -H - HARVEST Wlan

  -AP PM-HARVEST

  -There is no trunk on the access port, so "Support Vlan" is disabled in the configuration of the AP. Because I want the Capwap data and the data on the same vlan REAP H of transit.

  -J' have controller 5508 version 6.0.182.0

  The first time that I connect with my PC for Wlan H-REAP, I get an Ip address

  I see the DHCP from the AP request.

  I can disconnect and reconnect several times with my PC, and I get all the time an IP address.

  Then I disconnect the connection between the AP and the WLC, and I reconnect after a few minutes. (If the controller is again joined by AP)

  Then, when I try to connect to the Wlan REAP H, it is impossible to obtain the Ip address. I don't see "dhcp - discover" coming out of the AP.

  I have a message in the log of the AP: "customer 0018.de6a.3058 had 1 AES-CCMP TSC replays."

  Similarly, if I reload the AP, the problem is still there.

  The only way I found to solve the problem is to change something in the config of H-harvest-Wlan and apply it.

  You have an idea?

  Michel Misonne

  I'll make a guess savage and say that you have WMM disabled on the WLAN...  Enable WMM (supported) or upgrade to 6.0.196.0 (if WMM is disabled..)

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• Windows 2008 R2 as a guest cannot get the IP address of the server (VMware workstation 7.1.3 on Windows 7) professional

  Hi gurus,

  I installed VMware workstation 7.1.3 on my Windows 7 laptop professional x64bit and I can run my old VM (XP) without any problems in this regard. And I tried to install a new client (Windows 2008 R2 Standard x 64) on this subject, when I put the NETWORK card in the deck, he cannot get the IP address from my DHCP, always show me error "Windows has detected an IP address conflict...". ", I tried the IP static installation for her also, same result.

  I tried to install a new windows Server 2003 as a guest (also defined as a network bridge), it works very well, can get the IP address from my DHCP or can set a static IP address with no problems. Does anyone have a similar experience on this combination? Any solution to this issue?

  Best regards

  BUGBUG

  I recently managed to get bridge network work with a Windows Server 2003 R2 SP2 guest in VMW Workstation 7.1.4.385536 on a host Windows 7 SP1 Ultimate.

  VirtualBox 4.0.4.70112 is installed on the host and disabling the 'VMware Bridge Protocol' in the 'VirtualBox in Ethernet Adapter"on the host was necessary.

  Outpost Firewall Pro 7.1.0.3415.520.1247 is also installed on the host computer and I used some information from the link below to add some necessary firewall rules.

  http://www.agnitum.com/support/KB/article.php?id=1000061

• Cannot renew the IP address...

  Hello, last night my Dimension 8200 has lost the ability to use the Internet; It is connected to a router that is connected to the cable modem. My Dell laptop works very well. When I look at network connections, he says "Comcast Hi-speed limited connectivity or none. When I right click on it and try to 'fix', it cannot renew the IP address. I put off the power to the modem cable as well as the router. no help. Again, my laptop works very well. I've run Mcaffee and it found no viruses?

  Any suggestion would be appreciated.

  Pat

  
  

• Cannot change my IP address

  I tried to change my IPv4 by turn off my modem settings network and cmd prompt does not. Is there something I can do? Also, I noticed that when I use ipconfig / renew, I get the message ' year error occurred while releasing Interface Loopback Pseudo 1 interface.» The system cannot find the specified file. "I'm on the internet, but I wonder about this error message and if it has something to do with my inability to change my IP address.

  My ISP people seem lost on the issue.
  I'm changing my IP address as a chat IRC room is apparently glitched and reaching the operator/s by e-mail was a problem.

  Thank you.

  VFNNJ

  McAfee, no. I use Avast! and the Windows Firewall. Although my machine came with McAfee which I removed with the help of their removal tool.

  Interesting, the lease obtained seems to be the same time as before, but the expiration is now close to 02:00, so it is moved to the top of 5 hours or more.

  And once again, means the error message that occurs after the command ipconfig / renew-"an error has occurred all releasing interface Loopback Pseudo Interface 1. The system cannot find the specified file. "- matter?

  Thank you.

  Last question: no as long as your interface PHYSICS REAL releases and renewed.

  When the lease expires, it repeats.  So why I said that, so that you can get an IP address, you would have to turn off your machine through several cycles and hope that someone else either did the same thing and light them before you do and get your old IP address or someone adds a new device after expiration of your lease and clears the memory cache (for the DHCP server) and happen them to get your old IP address When your device is turned off.

  Most of the people will keep the same IP address from their ISP for years.

• WRT320N cannot not get IP address - using only 1 - no internet access - wired port hang web configuration pages

  You just bought Linksys WRT320N as a replacement for Netgear MR814.

  Cannot connect to internet using Linksys WRT320N.

  Installation program:

  ISP: Cox Communications (cable)

  Firmware: v1.0.03 build 010 July 24, 2009

  1 Wired - port 1 - for Windows XP SP 3 Dell Desktop

  Attempts to install:

  1 tried to set up using the installation CD.  Spread the slightest error with error 302: internal error. tried this 3 times

  2A through the reset, power off, procedures.

  3 Ping 192.168.1.1 = success

  4. connected to 192.168.1.1 via web browser

  5. set the MAC Address = MAC address of the computer

  6. the MTU value = Auto (1500).  Also tried manual 1492

  Could not get the IP address by using the version of IP address and IP address renew.  Address Internet IP still = 0.0.0.0

  Note that the web page will be still stuck after perfoming some actions (such as after switching between the tabs).  Message at the bottom of the browser is "Wating for http://192.168.1.1/Status_Router.asp.  And the hourglass on the screen away.

  Note that the old Netgear router still works fine and I am currently connected to the internet via the Netgear router.   I'd appreciate any help getting the new Linksys router connection/operation/obtaining of internet and IP address.

  Thanks for your help.

  I do not know where I was unclear: you wrote before you used the function of the cloning mac address on the WRT to clone the MAC address of the PC. In this way the WRT "pretended" to be the PC if you connect to the internet port WRT to your modem.

  However, the PC is not the device you used before you connect to the internet. The PC was not the device that was connected to the modem before. If you connect the computer directly to your modem it will either be an IP address. There will be no internet.

  The problem is that your ISP only allows you to have an active internet connection single at some point. If you plug in a different device with a different MAC address to your modem this device won't get an IP address. That you have connected the Netgear router to your modem and you have internet, then you need to clone the MAC address of the Netgear router. This is the device that is connected to your internet connection and it is the MAC address that your ISP has locked your internet connection.

  So, once again: clone the MAC address of the router netgear (internet or WAN port MAC address) of your Linksys router. Then the Linksys's router Netgear and your ISP should accept the Linksys router. The netgear router should have a status page in the web interface, showing you the right MAC address to be cloned.