Procedure runs in SQL, but not in my form of Oracle

Similar Questions

• Java Web Start application runs under jre8u40 but not jre8u51

  We have a Java web application that uses javaws. It runs very well under the update of Java 8 40, but under the update Java 8 51 jp2launcher.exe stops right, without launching the application.

  • I found the papers in C:\Users\me\AppData\LocalLow\Sun\Java\Deployment\log, but they are identical between j8u40 and j8u51 (except of course for the order of pots are loaded, the version of jre and the start time).
  • I connected the launch using Process Monitor for the two versions of jre. Under j8u51, jp2launcher.exe ends with just the result of 'SUCCESS' Comparing the two newspapers procmon, I can't choose anything unusual. They have both search in the directory C:\Users\me\AppData\LocalLow\Sun\Java\Deployment and their respective C:\Program Files\Java\jre1.8.0_XX\lib directories and others like, but then the j8u51 there is only.
  • The Windows event logs show any what that touch of Java.
  • I managed to run the jnlp whose value "JAVAWS_VM_ARGS = - Xcheck:jni - XX: - TraceClassLoadingPreorder - XX: + PrintCommandLineFlags-verbose: jni-verbose: class - verbose: gc - XX: + PrintGCDetails-Djava.util.logging.config.file=C:\misc\logging.properties" and connect the stdout/stderr. It looks like an end to newspapers javaws and jp2launcher for versions of the output, then both jre8u40 and jre8u51. Probably in the j8u40 version it launches another jp2launcher.exe to run the application.
    • Comparing newspapers two output gives nothing interesting. Classes are loaded in almost the same order, for the most part identical classes other than the few differences that are explained easily by just be more up-to-date used classes.
  • Finally, I was able to launch the application directly, using java.exe, by getting the customer their unpacking and installing the server files. The application itself works fine in jre8u51, so the problem is definitely javaws himself.

  I find very little documentation on the inner workings of Java Web Start and no documentation at all on jp2launcher.exe. Can anyone suggest what could go wrong here, or other diagnostic measures I can take?

  e: sorry for the strange user name. I tried to change it in my profile, but the forums don't seem to accept the change.

  Hi people.

  I managed to find the solution. There are several factors that interact and I think one of them is a bug in Java Web Start.

  Please see full report at http://stackoverflow.com/questions/31556273/java-web-start-application-runs-under-jre8u40-but-not-jre8u51

• Label and Format data binding work when running in JDev, but not deployment...

  Hello world:
  
  We run JDeveloper 10.1.3.42.70
  JHeadstart 10.1.3.2.51
  Our Oracle 10 g database is.
  
  I've been shooting some modifications of an existing Web page. Changes in which I remove an element of the page, or remove a box, this works fine running within JDeveloper (execution ViewController right-click menu arrow) and in the later deployment.
  
  But what I feel is anything in EO/VO data links - such as the format of a digital or a label behave differently when running in JDEV, then running deployed.
  
  When I change a label, or in a digital format in the folder of the local editor control tips entity/View, then run the application using the 'performance' within JDeveloper arrow, the changes appear as I expect.
  
  But I deploy this application, then run and formats and the old labels appear, but the new withdrawal of parts or elements is such that I wait for him. The new formats of labels / is displayed when the server is restarted. I'm testing if we can bounce the app, or bounce the container, but I wonder why these properties of the editor view/entity control Hint may not behave in the same way as other changes (deletion of point or region).
  
  I tried the model of cleaning & rebuild each time. I tried to clean the ViewController and rebuild each time. I closed my browser and deleted all the cache, then re-opened to make sure that I didn't put one old cached.
  
  After searching this forum, I tried the check from the "Bind prompt element to ADF BC control indication"Label text? '" under Tools - Preferences - settings of Jheadstart. Who hasn't made a difference.
  
  I do not understand why these changes form appearing when I run inside the JDEV app, but not when I deploy this application until the server is stopped. I hope certainly that I did not restart the server whenever I want to re - deploy.
  
  Does anyone have any suggestions? To try to understand what is happening here, I would also like to know where the text is generated when I make a change to a format or label. I can find references to the link in several files, for example ("#{bindings.") PersonLastName.label}'), but where is the actual location of the file that contains the label of 'Name' that I put in the entity control tips Editor folder in the "Text of the label" box?
  
  Is there a setting on the server? Is there something else I'm supposed to do?
  
  I appreciate any assistance.
  
  Mary
  U

  Mary,

  As long as the app server JAVA virtual machine is running, the adf business components are not reloaded. There is no mechanism for reloading available for business components on a JAVA virtual machine running. So, I'm afraid you will have to continue to restart the server. This also occurs when you run the application in JDev. She always starts a new OC4J instance, that's why you see the changes immediately JDev.

  Steven Davelaar,
  JHeadstart team.

• Newbie needs help can not compile a form of Oracle 10 g

  I'm trying to compile a form in Oracle 10 G. in the/u01/dba/oracle/product/1012ias/bin directory there is a script called frmcmp.sh which I assume is the correct script to use. He calls the frmcmp executable (it means compiling form, right?). Anway, I get the error
  
  FRM-91500: unable to start/complete the construction.
  
  This is on a HP - UX, HP - UX 11.11 running machine.
  
  I have unsuccessfully trying to get an answer on the Oracle website, and documentation that I have watched so far fail to solve the problem.
  
  I hate being a newbie!
  
  Thank you
  Harold

  for this you need to Xwindows session, if do not, you can do it by function as command line.

  * frmcmp.sh USERID=manager/manager@dbname MODULE_TYPE = form MODULE = form.fmb *.

  Greetings

• Call the procedure this file download, but not from the URL

  Hello
  
  Oracle 11g, Apex 4.1.1.00.23.
  
  I have a procedure that generates a CSV of a query (BLOB). The query uses the apex collections.
  As it seems impossible to use collections of the apex outside Apex, I can't call this procedure from the URL to download the file (the query fails).
  
  How can I call my procedure on click of a button, without reloading the page, and without calling the URL ?
  
  I have some ideas like the creation of a new page, with a conditional header process that calls my procedure to download the file, then call it in a popup, etc... but I need a simple solution...
  
  Thank you.
  
  Yann.
  
  PS: actually, I need the same functionality when you change a process, let us say a process page, in the source attribute, you link < police = "courier" > [Download Source] < / font >, this link simply calls < police = "courier" > javascript:doSubmit('DOWNLOAD') < / font >, but it seems that the page is not reloaded. That's exactly what I need, it does not call for any procedure in the URL, and it does not reload the page.

  Use an application process. These run in the security model for APEX, including the use of the collections.

• Firefox on OSX will run with sudo, but not without. Without sudo, a standard "Profile missing" error.

  I recently moved to a new Macbook, and I can't get Firefox to start unless I run it with sudo.

  Under osx, I looked in Users/steven/Library/Application Support/Firefox as well as the profile was there, but still does not work. I tried to remove the folder of Firefox and the .plist file, and it has always failed.

  I looked at other issues of support that are similar, especially https://support.mozilla.org/en-US/questions/951989?esab=a & as = aaq - but it's bad for me operating system.

  What I need now, I think, is a list of what folder locations and permissions * should * be defined on osx, because I know he'll be permissions since it works perfectly as root. If anyone of you have encountered this particular scenario before, and if yes, how do solve you this problem?

  Solved!

  Jscher2000 is right. Even if everything that said "steven: Editor", it wasn't very happy. It's what finally fixed it:

  Yori - 20:Firefox steven$ sudo chown-r steven: staff ~/Library/
  Yori - 20:Firefox steven$

  After that, it loaded perfectly.

• Compaq Presario CQ62 fan running full speed but not overheating

  Hello everyone, Ihad a fear a while ago and I was freaked out. I only am not much with the material so I came to you all.

  I had absolutely nothing on except a browser and youtube. There is no intensive program or anything running in the background when all of a sudden the fan running at full power. It was extremely noisy and scary since it's my first to deal with this. I had the computer for 4 years and I have never rough with her, but a week ago I had someone try to clean, but they have managed to take off the keyboard and that's all.

  I panicked and turned it off only to turn it back on, the problem is that I don't remember the error message I thought it was 90 b and he says that the fan was not working properly

  However this site says the fan was not working or he fell from the tree, which may be the case for them, but for me it worked as hard as possible.

  What should I do?

  I was going to borrow a Tablet, so I can use internet to disassemble and clean.

  However, from time to time I spray outside with the aircan and I have the laptop on stilts, so it is triggered on an angle. I put it down for the first time today to do this.

  ANY suggestions?

  TL; Dr

  Fan worked at maximum capacity

  I think I have an error which I think has identified as 90 b and he said that the fan is not working properly

  I use a Presario CQ62

  Before hand, he worked at the same max thought that the laptop was > warm just a little hot.  AND none of the intensive programs ran

  If they are all the same part I linked will work for you. It's the radiator and fan. You can buy just the fan and replace in your radiator but if all this is so cheap, why go to the extra trouble?

• SQL Querry has worked in the workshop of SQL but not in series AnyChart.

  Hello

  I use the following statement in SQL Workshop:

  T3.fname | NULL, select ' ' | T3. Lname label, to_char (to_date (t1.total_time, 'sssss'), 'mi: ss') Week_2_Time, t2.total_weight week2_weight

  evt_scr_board t1, evt_scr_board t2, t3 mem_profile

  where t1.mem_serno = t2.mem_serno

  and t1.evt_rnd = 1

  and t2.evt_rnd = 2

  and (t1.rx_cd = 'RX' and t1.evt_rnd = 1)

  and (t2.rx_cd = 'RX' and t2.evt_rnd = 2)

  and t3.mem_serno = t1.mem_serno

  It produces the following as expected:

  

  However when I run the same querry in a series of anychart page shows "No Data".

  

  The querry works fine if I don't need to convert the number to a date format. Any help would be greatly appreciated.

  Thank you!!!

  Syntax for a series is:

  SELECT link, label, value
  FROM ...
  

  In your last example, sysdate week_2_time isn't a value or time.

  The format below for your query would work, but I doubt that is what your waiting for.

  SELECT NULL,
         'Me',
         TO_NUMBER (TO_CHAR (SYSDATE, 'mmddyyyy')) week_2_time,
         135 week_2_weight
    FROM DUAL
  

  Jeff

• Acrobat javascript runs in Acrobat, but not drive

  Hello

  I have a file that I created to run a code and fill in a technical drawing. The code I created works perfectly fine on my computer with Adobe Acrobat Pro DC but, when I send it to my co-worker who need nothing updates or calculated. Previous PDFs, seniors, that I sent to him working on his computer. The only difference is now I have added the 'unit weight " table and remove the 4 fields that are not used anywhere in the pdf file (I have kept 2 of them 'flngNo' and 'class' because if I removed them the code wouldn't be updated on my computer either.). Is that what I'm supposed to put in my code to run as well on Adobe Reader? Thanks for all the help, I have attatched the file as well. I don't know if it works well. If not can someone please let me know how attatch a file from my computer on the forums properly? Thanks again and I hope someone can help me solve this problem.

  Dropbox - ejector pdf

  Yes, the link works.

  The code in this file is very advanced. I guess you have hired someone to create it for you? If so, they should provide instructions on how to use it.

  The only thing I can think of that may be the origin of this problem is the preferences.

  Go to Edit - Preferences - JavaScript and make sure that this security policy"of the global object to activate it" is NOT checked, and that the other checkboxes on this tab are checked. Click OK, and then try again...

• sample application is running on Simulator, but not on the device

  I created the 'Hello World' example and ran on the Simulator.  It works fine in there.  I used JavaLoader put the cod on my phone.  The icon is on the phone, but when I click it, nothing happens.  What I am doing wrong?

  JavaLoader gave me other errors.  So far, creating a files .alx file and installation with the Office appear to be more successful.  I think I'll use that in the future.

  Steven

• run or print output to the web form developer Oracle runtime

  Hi guys,.
  
  I have installed oracle forms10g in windows 7. I'm using firefox v.2. When I run the form, the web Oracle developer runtime form does not open. the output is exposed in the mozilla firefox itself.
  
  But how to run or display output to web runtime Oracle developer forms?
  
  Thank you in advance

  What is the problem? What do you mean with the form, the web Oracle developer runtime form does not open and the exit is exposed in the firefox of mozilla itself?

  Is the form open or not? If you see that you are, where ever, then the 'runtime' is underway!

  It's poster in the window of the browser? But you expect it in an own window?
  If this is the case, you must set separateFrame = TRUE in fomsweb.cfg.

• Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  That question is ambiguous: there is NOT a SINGLE type of data that can be declared in pl/sql, but not in sql.

  The Oracle documentaton is your friend.

  The doc of the SQL language treats the SQL data types.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/datatype.htm

  The doc PL/SQL does PL/SQL data types. Because PL/SQL is a language of proceedings (and sql is NOT) there are several types of data, as shown in this doc, PL/SQL-specific:

  PL/SQL scalar data types are:

  • SQL data types
  • BOOLEAN
  • PLS_INTEGER
  • BINARY_INTEGER
  • REFCURSORexplained in "Cursor Variables"
  • User-defined subtypes

  ALWAYS start with the Oracle documentation for these fundamental questions.

  Several times, as with this question, the question is too general to give a simple answer.

• EBS 11i: how to disconnect users who are web server and not yet on forms

  Hi all
  
  I would like to know how we can disconnect users that are web server and server not yet on the forms.
  What we do is the following:
  Adapcctl.sh for the 1-stop web server stop
  2-change AppsLocalLogin.jsp to a static page that say we are in maintenance
  3 - start web server adapcctl.sh start to ensure that users can see maintenance page
  
  The problem is users finding themselves in the web server (first page) but who have not yet open forms pages can still access the app after the point number 3-
  
  Is there a solution for this problem? Do know us what users are on the web server, but not in the forms?
  
  Thanks in advance.

  So in servlet mode, everyone will be disconnected

  Fix.

  What type of customizations will be unavailable? Functional customizations? New tables, simultaneous new programs, new data loaded? The thesis is available even without bouncing apache.

  Since you have posted this question in the forum 'Technology - OA framework', I assumed that we are talking about only jsp pages.

  Thank you
  Hussein

• Execution of a procedure - work on Isql Plus but not SQL Developer?

  Hi people.
  
  I'm playing with some stuff and design the structure, mostly just passing values autour procedures. I have a (procedure1) procedure which takes a sysdate and then switches to another (procedure2) procedure that accepts the parameter and done a dbms_output.put_line.
  
  The two objects are valid and compile correctly. I use
  
  exec procedure1;
  
  with iSql more and it works perfectly. It prints the output and any dates.
  
  However if I use exactly the same command in SQL Developer it gives me the error "ORA-00900: invalid SQL statement.
  
  I do not understand why this is happening? The code runs perfectly in one but not the other...

  Remember that SQL * most orders do not work in the spreadsheet. So, that would be

  exec my_proc
  

  In the worksheet, you must declare an anonymous block...

  begin
      my_proc;
  end;
  /
  

  If you right-click on the procedure in the browser and select run, then SQL * Dev will throw up a harness for you. Very convenient if you want to get DBMS_OUTPUT, variables defined, etc..

  Cheers, APC

  http://radiofreetooting.blogspot.com

• Sql XE over procedures run command line

  Greetings experts,
  I am trying to familiarize themselves with the command-line of XE and PL/SQL procedures, so what I do, I wrote a simple script that creates a procedure that prints its input value. Then I compile and run it via the command line.
  
  The following is the script (small_proc.sql):
  

  create or replace procedure sproc (printthis in number) is
  
  begin
  
  dbms_output.put_line('the value is' || printthis);
  
  end;
  /

  Question:
  1. I compile the script by:

  @small_proc

  then I run:

  run sproc (4);

  It is said that the procedure is carried out, but it's not printing anything (I think that "the value is 4").
  Something wrong with my code or my step?
  
  2. How can I change the path environment so that I can't copy the script in the bin every time
  I want to run it?
  
  3. How can I check environment path in this command line?
  
  Forgive my ignorance.
  Kind regards
  Valerie

  Hi, you have to sent in SQL * more:

  Set serveroutput on;

  exec sproc (4);

  Roberto.