Uninstalled movie maker SP3 and I can't reinstall.
I accidentally uninstalled froem Wnidows Movie Maker Windows Service Pack 3. Now I have not now how to get it back. Can someone help me please?
Hello
Do a restore to an earlier date, please visit the link below. :-)
http://www.Microsoft.com/windowsxp/using/Setup/support/sysrestore.mspx
Tags: Windows
Similar Questions
-
OK... I've published my Movie Maker presentation. It will be presented via a laptop computer and projected. First of all, what kind of cd/dvd I need? I know that this information is listed under the HELP section of the Movie Maker program, but what do you propose to help? AND THEN... How can I do to burn video on cd? I got to the question re: given dvd vs dvd-video and was confused (sorry... it doesn't take much!). In my mind, it's a video, but the explanation stated that in this format must then be read via a dvd player. Finally it can be read that way and it would be nice to have this option, but my goal is now to have played through a computer laptop and projected. I tried to save it as a video dvd last night, but after almost two hours of "transformation" (my video completed is approximately 3-1/2 minutes), I eventually escape and stop. Can you guide me through this in simple terms? Thank you!
DVD-R Virgin should work for you, and you can
burn the video DVD in Windows DVD Maker."Import files into Windows Movie Maker"
"Publish and burn a movie to a DVD.
http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.htmlWindows Vista - Windows DVD Maker - burn video disc
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-discWindows Vista - Windows DVD Maker
http://www.windowsvistauserguide.com/windows_dvd_maker.htmWindows Vista - DVD - video burning - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questionsWindows Vista - solve problems with creating a DVD-video using
Creating Windows DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker -
I uninstalled Acrobat pro Dc and how can I reinstall Acrobat pro X 1?
I upgraded to Acrobat Pro CD and hated. I tried instructions to see how I could go to the Pro X 1 and they said I had to first uninstall the DC pro version. I did it. Now, how can I download the original X Pro! Version?
Hello
PFB link for download
https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html
Hope this helps!
-
I finished a slide show with music. I want to put on a DVD with a few more pictures of our high-school reunion and send him outside Alumni free of charge... Is this possible?
It would be useful to know the version of Movie Maker, you use...
I'm guessing that you have saved the project i.e. .mswmm file
is useful for a re-release in Movie Maker.If you save the project as a video file to .wmv format, that you can share
with friends, burn it to a DVD, etc...In Windows XP Movie Maker 2.1...
To save in a .wmv movie file...
Type of... CTRL + P (or go to...) File / save movie file)
to open the wizard movie recording.
Choose... My computer.
Next /.
Enter a name and a location.
Next /.
ICT... "Best quality for my computer.
Next /.
Wait while the movie is saved.
Finishing...Vista Movie Maker 6 refers to the publication:
Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerMovie Maker Vista - Edition
http://www.Papajohn.org/Vista-publishing.htmlIf you're running Vista, you can add the Movie Maker video
and your photos to a Windows DVD Maker project and create
a DVD.If you are running WIndows 7 and Windows Live Movie Maker
the following video shows how to save the movie in WMV format.
And you can also use Windows DVD Maker in Windows 7.How to save the project in Windows Live Movie Maker
http://www.YouTube.com/watch?v=ZyqZm5MBc7oIf you need more details for a specific version of Movie Maker
Let us know. -
my laptop stop save my movies for windows and I can't burn a dvd eithier
my laptop stop save my movies for windows and I can't burn a dvd eithier
Hi handyman6810,
Can you give us more details about your film, about saving?
For your problem of DVD burning, you can also take a look at the article with information here.
Thank you!
-
I'm trying to uninstall Cs6 master collection and I can't because this information is displayed ERROR: DW040: the product '{E8AD3069-9EB7-4BA8-8BFE-83F4E69355C0}' is not installed. Cannot proceed with the uninstall. How can I solve this problem?
Hi Paulov53532347,
Try to use the cleanup for the same tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems
Let us know if that helps.
-
I uninstalled somehow my dvd player - how can I reinstall it
I uninstalled somehow my dvd player - how can I reinstall it
Click Start and right click on computer, then click Properties. Click on Device Manager, find the entry for CD-ROM/DVD-ROM drives. Open this entry and see what is there. Your player should be there. If she is! or? right click then click on uninstall. Click the Action tab, and then click Scan for hardware changes. If you have a standard DVD/CD player, Windows needs to reload the driver. If it isn't a standard drive or there is not an entry for the drive, you will need access to the web site of your computer manufacturer and download the driver.
Good luck.
-
I am a monthly subscriber to Adobe Professional. It was uninstalled from my computer. How can I reinstall?
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Install, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
-
Where and how can I reinstall the external hard drive to the new HD to the computer?
Original title: HD crashed.
I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.
Hello!
You will need to use a full copy of Windows XP. Should be a sticker with the product key on the side of your desk or below if it is a laptop.
Once you have this drive, you can reinstall Windows XP. After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.
If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media. Just to provide the model and serial number and they should sent it.
-
received error 2 constantly... uninstalled CC... How can I reinstall it? all I see is the trial or pay options
Hi Brent,
Please see the thread below:
Creative office of cloud has failed to update. (Error code: 2)
Kind regards
Sheena
-
I have MPEG files that I'm editing and when I load in Movie Maker only the audio part load. During loading, I get the following message at the bottom of the screen for the audio to load but when that ends more nother is responsible and the screens indicate only the audio track.
Hello friend. I know that windows movie maker supports wmv video well, you can convert your videos to wmv mpeg video for a trial, it should work. If you don't know how to convert a video, this video converter will help you a lot.
-
Why my published video movie maker glitch and stops after about 40 seconds?
I tried to post this video countless times. It works fine in the preview, has no error message, all the source files have not been moved and have no red x, and the gel will be about to halfway through a segment of the video, then part of the segment plays, but not all of it.
I was converting my files using FormatFactory wmv source files.
Any ideas?
Any help will be much appreciated.I tried to post this video countless times. It works fine in the preview, has no error message, all the source files have not been moved and have no red x, and the gel will be about to halfway through a segment of the video, then part of the segment plays, but not all of it.
I was converting my files using FormatFactory wmv source files.
Any ideas?
Any help will be much appreciated.====================================
What version of Movie Maker are you using?
If you use Vista Movie Maker 6... It can
be worth a try to go to... Tools / Options / Compatibility
tab and disable all filters before the publish.If you are not running the latest version of the film
Maker, it may be advantageous to update.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Get Movie Maker
http://Windows.Microsoft.com/en-us/Windows/get-Movie-Maker-downloadSometimes the files are played in the Movie Maker application
but when they are encoded in a video of the final...
problems can occur.What is the duration of this project? Sometimes
large, complex projects can cause problems and the
Difficulty is to create several small projects. If each
segment is saved in the. WMV format... the Group
of. WMV files can be re-imported in Movie Maker
and combined into a final single movie file. Or they
can be imported in creation of DVD and each item will be
become a scene (chapter) on the DVD. -
Movie Maker - freezing and jump
I am trying to create a video birthday photos in Movie Maker. I'm not using any video, just files .jpeg and .wav for background music file.
The purpose is about 16 minutes in length. At different locations in the movie (different each time), breaks the presentation, and then jump. I usually miss about 2 seconds. I tried the publication to see if there is no change, but the pause/freeze/skip is on the DVD as well.
How can I fix?
Thanks for your help!
I am trying to create a video birthday photos in Movie Maker. I'm not using any video, just files .jpeg and .wav for background music file.
The purpose is about 16 minutes in length. At different locations in the movie (different each time), breaks the presentation, and then jump. I usually miss about 2 seconds. I tried the publication to see if there is no change, but the pause/freeze/skip is on the DVD as well.
How can I fix?
Thanks for your help!
=============================================
Just some thoughts...I wonder if there will be an improvement if you created the video
slide show without the .wav file?There may be a corrupt JPEG in the Group of photos... it may be useful
Trying to convert JPEG files to BMP format before importing it.If you add a lot of transitions and effects that could be a problem.
Also try to go on... Tools / Options / Compatibility tab and disable all the
filters / OK.FWIW... free PhotoStory 3 can be a better application to create video slides
shows with music.PhotoStory 3 for Windows
http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx
(works on XP, Vista and Win7)Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7. The new live version of movie maker won't recognize my files. How can I fix this?
I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7. The new live version of movie maker won't recognize my files. How can I fix this?
==================================================
This happens when the former projects include transitions and effects which are
not included with Windows Live Movie Maker.Best bet IMHO... create new projects, or install earlier versions of Movie Maker.
See the following articles:
5 versions of Windows Movie Maker in Windows 7
http://www.brighthub.com/multimedia/video/articles/25282.aspxWindows 7 - XP Movie Maker 2.1 edition... but in Windows 7
http://www.brighthub.com/multimedia/video/articles/28935.aspxVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Movie Maker grab and changed all the desktop icons for Movie Maker and all isopening Movie Maker
I have a big problem, I have Windows 7 and I made a film using still photos on my computer now all binding, Movie Maker says that Movie Maker does not support the selected file type, 3 first films went great, but obviously I hit the wrong key, it changed all the icons on my desktop to display the icon of Movie Maker and each icon now opens on seizures to the top of Movie Maker, I tried every troubleshooting and restoration utility, but nothing changes; When I go to Movie Maker hand opens as if she's trying to do something. Can you give me any advice, would be much appreciated I can't do a thing right now.
VI
Have you tried to do a system restore
Safe mode for one hour before the beginning of the question?Using Windows 7 or Vista System Restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Maybe you are looking for
-
How can you write a table to a file when you press a button in Labview 8.5
I am new to LabVIEW, so I don't know if it's hard or not or can even be done. I have data I am gather and store it in a table in LabVIEW but I want to be able to take all the data table and write in a text or excel file. Another part I want is whethe
-
How to choose a SIM for calls out?
Hello, I hace of choice for all calls, wich sim I want to use, I would like to know how could choice a SIM for calls, could someone help me? Thank you
-
Get the error message "Invalid stem Pipe" during the execution of the restore
Original title: invalid stem tube Am not able to restore to another point, because it tells me that the stem of the pipe is not valid
-
Windows Vista doesn't let me udate.
I had Windows vista update problems.
-
I upgraded to FastAccess 2.4.97 and since then I am harassed for upgrade to version 3, whenever I connect to my laptop Studioxps. This equipment is used for commercial purposes, and this is not the behavior I expect software used in this context. Apa