Process as an Interface?
Hi allCan someone tell me how to implement the process as an Interface.
I have a process called 'A' and in this process, I have a process creation activity.
I have another process (Interface) named 'B' and also match this B process with process creation activity of A Process.
Now, I have another process called C where I the implementation of the business logic.
In java, the class that implements the Interface must give substance to these abstract method that are defined in the Interface.
I want to do the same kind of thing in ALBPM which means since the activity of creation of my process from the process is extended/instruments/attached to a process B (interface). Now, how to achieve communication between the Process A, B and C since the business logic is it to deal with C. Is it being feasible?
If this is not the case, what is the purpose of the application w.r.t. ALBPM 5.7/6.0 Interface and how we can reach the interface implementation. Thanks in advance.
Sidonie
Not sure whether in the documentation, but you use an interface to process as a way to call a sub-process dynamically during execution.
Sometimes you want the flexibility to wait before execution to decide which subprocesses to call. Your process template can look like a spider on a mirror when this is the case. I use it when I have an activity with several conditional transitions leaving. If each of these transitions are going to a different subprocess activity, you can consider using an interface to process to dynamically call the correct process on the fly.
An example is when you have four different types of loans each treated differently. If you use the interface to call the correct ready sub-process (again depending on the loan type) then instead of having an activity with four conditional transitions go into four different subflow activiities, you would have a single transition in a subflow with interface of process activity. One of the incoming arguments to the interface of the process's id of the sub-process.
The advantage of this approach is that it cleans your process (a single transition rather than many conditional transitions). The disadvantage is that it is abstract and difficult for some to understand what is happening behind the scenes.
Dan
Tags: Fusion Middleware
Similar Questions
-
Process Images without interface
I'm the treatment of thousands of images, change the size and format. I feel like a lot of time is wasted in the display of the image and any other associated with the interface. Is it possible to do behind the scenes? Thank you.
Not with the PS and according to formats to treat you will never be able to avoid it completely. Otherwise there are tons of tools to image conversion Irfanview or XnView as implementations of same command-line exotic libraries ImageMagick, which can treat most of the common formats, comes usually with limitations on colors and things like metadata management.
Mylenium
-
How to create a hidden for a spy app process
If you want to create processes background hidden for a spy app for example how would you do it?
I want to have a process with no interface user, no icons, not visible in the Task Manager, not appearing is not in Manager of application etc. Which of these things are achievable?
You can use an application of module system. No UI, icons and not visible in the Task Manager.
He always appears as an installed application and appear in the list of the modules, they are part of the security model of BB.
-
Communication problem between asynchronous process BPMN
Hello, I have problems with communication between the two BPMN processes with an interface assynchronous.
I have a main process BPMN (process a) and on the inside, I send task to call a second method BPMN (B). The two processes are inside the same project JDev.
B BPM process was created using the JDev Assistant. I chose an asynchronous service and set the input and output variables. In the process of creating, I checked the start and end events (on the implementation tab) and the two are defined corretcly. In the process composite.xml B has 2 operations on Services exposed (left) side.
A process, within the implementation of Task tab send, I selected:
Type of conversation: lance
Properties
-Implementation: appeal process
-Process: I can browse and select B processes
-Node: Nothing appears on the LOV.
If instead of the send task I use a Service task I can select the node (node B process starts).
I use versions 11.1.1.4 JDev and SOA/BPM.
Can you help me? I'm doing something wrong?
Thanks for your help.
Published by: 861727 on May 26, 2011-09:12There is a known issue in 11.1.1.4 when calling another process (in the same project) using the send/receive activity. As you noted the start for the process called node is not displayed. The workaround is to use the event to throw the Message and Catch event Message. They have the same semantics of async as send/receive activity. You would use Service call since it is synchronous.
-
Police text and spacing in Drop Down Menu is weird
Hi all
So, about a week and a half, I formatted my PC because it was slow and usually comes not good results. I want to say I had no problem with Firefox before this and I've never really changed all the settings of Firefox. Maybe a couple on data storage / navigation, but that's all. The only Addons I had never installed were AdBlock Plus, uBlock origin, Badger of privacy and I forgot the name of it, but it was a Flash Player addon from blocking. Still does not issue however.
In any case, after formatting, I reinstalled everything, Firefox first, and although things went along. However, a few days and I noticed that the text in all of my menus expected offshore. I got a thorough review and noted the police was different and the spacing was weird. Not only that, but I see fewer items in dropdown lists longer. At the time of writing these, my uploaded image still has not been loaded properly, then here is a link to what I mean. http://i.imgur.com/qwodW7Z.PNG (The correct appearance of the text is on the left, while the strange one is on the right).
I don't know what caused it. I change all the settings at all after reinstalling Firefox. I asked a friend who uses it, and I even went to the Subreddit Firefox for more help, but nothing worked. I checked my display settings and text was 100%, I checked the internet options but the default text has been set to Times New Roman, just as it is in Firefox itself - it's all by default. I have disabled hardware acceleration and who does not, I was told to try the "gfx.content.azure.enabled" parameter 0 (which I guess is 'false'), but I couldn't see that in my remarks: config page, so I added it as boolean. Then I learned to add and try it to 0 and 1, but if nothing works to stay 1 (which I suppose is 'true'). I tried this but still nothing. It has been like this for several days and the problem still persists.
Here's the weird part, however. I refreshed Firefox troubleshooting information section and after doing this the text goes back to normal (what it looks like on the left side of the image), BUT when I close and open Firefox, the next time, the text went strange in the drop-down menus again. I've deleted and reinstalled Firefox, but it still persists. I deleted all the files and folders in Firefox/Mozilla on my machine, reinstalled and the text are returned to normal... only that he goes bizarre after have closed and reopened Firefox.
I don't know what the problem is. I even tried to change the font in Firefox, but it did nothing! I tried Internet Explorer, Edge, and even Chrome to see if the problem persists it but it doesn't work. I open it, try the same website in all browsers and I see the text in the fine search. I closed and reopened all of them and the text looks exactly the same. Why is Firefox decides to change this text? This part of a new update? Do I just not the latest version of Firefox before my format? If it IS an update, why the text seems a way when I update, but in a different way when I open Firefox any time thereafter a part?
This isn't a huge problem, but see the completely fake search text in my drop several times per day slowly that annoys me more each time. It's almost like I'm be mocked because I don't know how to fix it or what is the cause. I don't want to change the browser just for peace of mind, I would never know what was causing the problem if I do this! My machine and my graphics card drivers are all up to date. I don't want to format my PC again just for a little luck, it can solve the problem, especially when there is no guarantee the problem!
I use Windows 10 and I have the latest version of Firefox, 49.0. Graphics card is a Radeon HD 5770 and I run a 64 bit OS. I don't know why it is a problem. I never had this problem before my format, and I've never had other problems with Firefox, so what gives? Can't get someone else to the problem online at ALL. I'm just crazy, and it's all part of a bet to date, but for some reason any the first time I have updated Firefox it won't load properly, or what?
Any help would be appreciated. I am all of these ideas, I don't want to format and I don't really like the other browsers except Firefox. Yes, I'm sure I can try to live with it, but it annoys me everytime I see it.
(Please tell me there is something in my troubleshooting information that resolves this problem).
QUICK NOTE: Room ONLY, which descend from the menus look quite normal is the page Firefox Options itself.
Hmm, this seems incorrect to me. So much for the control panel fonts.
You can see someone else? One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. A few kinks are always discovered and developed, and I wonder if this might be a factor here.
Are you using e10s?
You can check if you have this feature enabled as follows. Either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table on the page, find the line "Multiprocess Windows" and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
To determine if this feature is causing this problem, you can turn off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by browser.tabs.remote.autostart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
-
Videos playing only with the sound after update 49.0.2
After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/
It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false
This may not take effect until the next time that you exit Firefox and start it again.
One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste Subject: support in the address bar and press enter
In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
To determine if this feature is causing this problem, you can turn off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
-
OK so I play a game called Emporea on my PC and it uses flash, I've never had a problem then I refreshed firefox as she suggested and it updated to the latest version, I've never had problems with it before on previous versions and now, with this, the lag is so bad that it makes the game almost unplayable. I tried to open it in other browsers such as IE, and it works very well in people. so, the question is somewhere with firefox, I've updated my flash drive and still no change in firefox
One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste Subject: support in the address bar and press enter
In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
To determine if this feature is causing this problem, you can turn off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
-
ASA 8.6 - l2l IPsec tunnel established - not possible to ping
Hello world
I have a problem of configuration of the CISCO ASA 5512-x (IOS 8.6).
The IPsec tunnel is created between ASA and an another non-CISCO router (hereinafter "router"). I can send packets ping from router to ASA, but ASA is NOT able to meet these demands. Sending requests of ASA is also NOT possible.
I'm trying to interconnect with the network 192.168.2.0/24 (CISCO, interface DMZ) premises and 192.168.3.0/24 (router).
The CISCO ASA has a static public IP address. The router has a dynamic IP address, so I use the dynamic-map option...
Here is the output of "show run":
---------------------------------------------------------------------------------------------------------------------------------------------
ASA 1.0000 Version 2
!
ciscoasa hostname
activate oBGOJTSctBcCGoTh encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
address IP X.X.X.X 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface GigabitEthernet0/2
nameif DMZ
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
passive FTP mode
internal subnet object-
192.168.0.0 subnet 255.255.255.0
object Web Server external network-ip
host Y.Y.Y.Y
Network Web server object
Home 192.168.2.100
network vpn-local object - 192.168.2.0
Subnet 192.168.2.0 255.255.255.0
network vpn-remote object - 192.168.3.0
subnet 192.168.3.0 255.255.255.0
outside_acl list extended access permit tcp any object Web server
outside_acl list extended access permit tcp any object webserver eq www
access-list l2l-extensive list allowed ip, vpn-local - 192.168.2.0 vpn-remote object - 192.168.3.0
dmz_acl access list extended icmp permitted an echo
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (DMZ, outside) static static vpn-local destination - 192.168.2.0 vpn-local - 192.168.2.0, 192.168.3.0 - remote control-vpn vpn-remote control - 192.168.3.0
!
internal subnet object-
NAT dynamic interface (indoor, outdoor)
Network Web server object
NAT (DMZ, outside) Web-external-ip static tcp www www Server service
Access-Group global dmz_acl
Route outside 0.0.0.0 0.0.0.0 Z.Z.Z.Z 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
IKEv1 crypto ipsec transform-set ikev1-trans-set esp-3des esp-md5-hmac
Crypto ipsec ikev2 proposal ipsec 3des-GNAT
Esp 3des encryption protocol
Esp integrity md5 Protocol
Crypto dynamic-map dynMidgeMap 1 match l2l-address list
Crypto dynamic-map dynMidgeMap 1 set pfs
Crypto dynamic-map dynMidgeMap 1 set ikev1 ikev1-trans-set transform-set
Crypto dynamic-map dynMidgeMap 1 set ikev2 ipsec-proposal 3des-GNAT
Crypto dynamic-map dynMidgeMap 1 life span of seconds set association security 28800
Crypto dynamic-map dynMidgeMap 1 the value reverse-road
midgeMap 1 card crypto ipsec-isakmp dynamic dynMidgeMap
midgeMap interface card crypto outside
ISAKMP crypto identity hostname
IKEv2 crypto policy 1
3des encryption
the md5 integrity
Group 2
FRP md5
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal midgeTrialPol group policy
attributes of the strategy of group midgeTrialPol
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
enable IPSec-udp
tunnel-group midgeVpn type ipsec-l2l
tunnel-group midgeVpn General-attributes
Group Policy - by default-midgeTrialPol
midgeVpn group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:fa02572f9ff8add7bbfe622a4801e606
: end
------------------------------------------------------------------------------------------------------------------------------
X.X.X.X - ASA public IP
Y.Y.Y.Y - a web server
Z.Z.Z.Z - default gateway
-------------------------------------------------------------------------------------------------------------------------------
ASA PING:
ciscoasa # ping DMZ 192.168.3.1
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.3.1, time-out is 2 seconds:
?????
Success rate is 0% (0/5)
PING from router (debug on CISCO):
NAT ciscoasa #: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0
NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0
NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0
Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 0 len = 40
Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 1 len = 40
Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 2 len = 40
Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = len 3 = 40
-------------------------------------------------------------------------------------------------------------------------------
ciscoasa # show the road outside
Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP
D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone
N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2
E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP
i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone
* - candidate by default, U - static route by user, o - ODR
P periodical downloaded static route
Gateway of last resort is Z.Z.Z.Z to network 0.0.0.0
C Z.Z.Z.0 255.255.255.0 is directly connected to the outside of the
S 192.168.3.0 255.255.255.0 [1/0] via Z.Z.Z.Z, outdoors
S * 0.0.0.0 0.0.0.0 [1/0] via Z.Z.Z.Z, outdoors
-------------------------------------------------------------------------------------------------------------------------------
Do you have an idea that I am wrong? Probably some bad NAT/ACL I suppose, but I could always find something only for 8.4 iOS and not 8.6... Perhaps and no doubt I already missed the configuration with the unwanted controls, but I've tried various things...
Please, if you have an idea, let me know! Thank you very much!
Hello
I've never used "global" option in ACL, but it looks to be the origin of the problem. Cisco doc.
"The global access rules are defined as a special ACL that is processed for each interface on the device for incoming traffic in the interface. Thus, although the ACL is configured once on the device, it acts as an ACL defined for Management In secondary interface-specific. (Global rules are always in the direction of In, never Out Management). "
You ACL: access-list extended dmz_acl to any any icmp echo
For example, when you launch the ASA, there is an echo response from the router on the external interface--> global can block.
Then to initiate router, the ASA Launches echo-reply being blocked again.
Try to add permit-response to echo as well.
In addition, you can use both "inspect icmp" in world politics than the ACL.
If none does not work, you can run another t-shoot with control packet - trace on SAA.
THX
MS
-
Firefox.exe 2 running in background all the time I open Firefox
Whenever I open Firefox, there are two firefox.exe running the bottom everytime I open the browser. Whenever I try to close the other, it blocks all tabs that are on the browser, and whenever I have reload the tabs, it appears again.
I've scanned my computer several times with several antivirus, but there was no virus found. I also disabled the plugins that I thought the question was and rested Firefox, but he was always there. I restarted my computer, no luck in doing so. Uninstall and reinstall of Firefox has not even do the trick either.
The dual process of sky-rocket my RAM and CPU and it starts to get boring. Help, please! I appreciate any cooperation!
This could indicate that your Firefox uses a new feature 'multiprocessing '.
E10s
One of the changes in Firefox 48 + title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between systems: many users find more quickly, some are slower, for many, it's neutral. It is probably a bit more memory than if everything runs in a single process firefox.exe usage.
Are you using e10s?
You can check if you have this feature enabled as follows. Either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table on the page, find the line "Multiprocess Windows" and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
If you think that Firefox is not performing or now uses an unreasonable amount of resources, you can assess whether e10s is causing this problem by turning it off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by browser.tabs.remote.autostart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
-
Firefox 49.0.2 so slow it's unusable
Suddenly, Ff 49.0.2 on a 8.1 win computer laptop became so slow freaking it is unusable (send this using Chrome). Keep also get "a web page slows down browser; want to wait or stop it"on EVERY SINGLE SITE.
Here's what I've tried but NONE WORKED AT ALL:
-Updating et seq. - started Ff in Safe Mode (it does run slower than ever). -Went back to an older version of Ff (48). -Tried to disable all the modules & plugins, but apparently, you cannot turn off those of Win8.1 (I couldn't find in any case); all that you can do SOME of them should be asked to activate.
Would be really that to be able to use Ff again (my superior printer works Chrome with Ff), so any help would be appreciated.
More generally:
One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:
- button '3-bar' menu > '? ' button > Troubleshooting Information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table on the page, find the line "Multiprocess Windows" and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.
If you use e10s:
To determine if this feature is causing this problem, you can turn off as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered
(3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false
Note: the exact name of this preference may vary, but it will start by browser.tabs.remote.autostart
On your next startup of Firefox, it must be run in the traditional way. Any difference?
-
Unable to find the good in f that is indicated in the Module PA
Dear members,
We use a Module for the calculation of the costs of the projects and also FA Module with other financial modules such as GL, AP etc..
We have created a project. When we ask for this project in the PA_PROJECT_ASSETS_ALL table, we can see where 4 numbers are associated with this project.
We can just see active numbers, but the FA_ASSET_ID column in the same table, and the FA_PERIOD_NAME columns are null.
We chose the numbers shown in table PA_PROJECT_ASSETS_ALL for a given project and we try to query the number of assets in FA Module.When, we did what no records are.
Is someone can you please tell me what is the problem? We jumped in any process?
Your entries will be a great help for me.
Thanks in advance!
Best regardsHello
The assets that see you in PA have been put in place as part of the opening of the project capital.
On this project, you need to enter expenses and run the applicable cost of distribution process and then interface to GL.
You can also provider interface accounts payable costs (after input project partners supplier invoices is AP).
Run the process: people's Republic of CHINA: update project summary amounts.
Access the form of Capital project, you can see the costs accumulated on this project.
The process - people's Republic of CHINA: generate lines of assets, and after this Interface Asset lines to FA.Responsibility for FA, you should see the active lines in addition to mass and from there, you can publish them (unless they were posted automatically when it is connected to PA).
Only now may question the FA asset.Dina
-
Hello
Can I get an answer on this issue please?
If we use ODI to interact with an external web service, the web must
service (in XML) response to be written in a file on the disk? Is it possible
to receive the XML response and treat it without it first being
written to disk?Hi Brian,.
You must write the XML response to a file and then process using an interface.
-Julien
-
I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...
Hi MAMARDA,
Welcome to the Microsoft Vista answers Forum!
I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.
(a) what version of Windows 7 use you?
(b) what is the exact error message you are getting?
Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.
Scan SFC enforcement procedure:
1. click on the Start button
2. on the Start Menu, click all programs followed by accessories
3. in the menu accessories, right-click on command line option
4. in the drop-down menu that appears, click the "Run as Administrator" option
5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press enter
7. a message is displayed to indicate that "the analysis of the system will start.
8. be patient because the analysis may take some time
9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11. once the scan is finished, close the command prompt window, restart the computer and check.
Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.
To restore the operating system to an earlier point in time, follow these steps:
1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.
2. in the System Restore dialog box, click on choose a different restore point and then click Next
3. in the list of restore points, click a restore point created before you started having the problem, and then click Next
4. click on finish
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
For more information, please follow the below given link:
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/
Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.
For a safe boot, you can follow the below given steps:
1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.
Click the Start button, click the arrow next to the button lock and then click on restart.
2. do one of the following:
a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.
When you are in safe mode, follow the steps mentioned above to complete the restore of the system.
Hope the helps of information.
Please post back and we do know.Concerning
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Is FDMEE runing through the user interface or batch process?
In an event of jython script, how can I determine if the FDMEE process is run through the user interface or as part of a batch?
Use the method getBatchJobDetails (BigDecimal pLoadId) API, if it returns a result set, then there a batch process, if it is not it is not.
-
Is there anyway to share an application on a web page of Adobe Muse? Specifically, an applet exported from processing interface?
Hello
You can add your application to the Muse page by using the feature to insert the HTML in Muse. However, it depends on your server hosting or not the application will run. For example, if your application is in php, and your server is configured for php, the application should work.
Kind regards
Aish
Maybe you are looking for
-
Tecra S3 wireless driver not on the Toshiba site
Hello Can you please help me to install my card wireless on Tecra S3? I can't find the driver on the drivers toshiba download page, but there is a software to configure the settings for it. I don't have the Toshiba rescue CD, and I really need to use
-
Qosmio G20-121st - unable to order recovery disc
Hello I had accidentally deleted the Qosmio drive partition in my hard drive and now I am unable to install windows on my drive.When I try to install windows it shows a blue screen with a memory address and etc. I think that the disk partition table
-
Why the vob file has not been opened by windows media player. ?
Hello I have a DVD of the Hindu film. When I try directly to open to watch this film of media windows Player, but does not work. It opens only player form of de Niro and VLC Media. Please give me some advice on this, that is why the opening of Window
-
New 351 tricolor cartridge will not print Yellow or mix for green
I am using Windows 7 64 bit My printer is an all-in-one Photosmart C4580 No error message I tried to use the HP Digital Imaging Monitor but it is not installed. I tried to know where download and install one but cannot uinderstand where to buy. The p
-
the component I am trying to use is on a network resourse which is not available, try the other way?
When I try to install silverlight I get this error message, the function, I am trying to use is on a network resourse which is not available, try the other way? What now?