process control of a host linux in vFoglight

Similar Questions

• Catalyst Control Center - the host Application has stopped working

  my laptop rpet Catalyst Control Center: the host Application has stopped working. What should I do?

  Try to update the graphics drivers on your laptop manufacturers site

• vCenter vCSA unit lost, how to install a new one to take control of the host?

  Hello

  Due to a disk failure, I lost the VCSA control 2 guests. Now I manage the VMs entering each host separately.

  The backup did not work, so I want to reinstall VCSA 5.1 again.

  I read that the first step is to "unpin" the hosts of the VCSA.

  Is there a procedure for this operation? I want to reinstall and take control of the hosts and their virtual machines.

  Will this affect virtual machines running settings? new device "reads" the current configuration?

  I supported the VCSA configuration, but I think that it is not reliable because this time we made changes directly to the guests.

  Thanks in advance

  given that the old vCenter isn't available.

  and as you said that you are able to connect directly to the two hosts, so there is no locking mode either. nothing should be done 'Dismantling' part of it.

  Just prepare your new VCSA, connection inside once the configuration is successful using the vi client or web, create new data Center virtual

  and start adding hosts, the two hosts will be added without problem.

  New VC will be able to reset the account vpxuser password as part of the welcome add treat yourself.

• HFM process control

  Hi all, I have v.11.1.2.1 HFM
  
  I tried to generate custom through the HFM database reports, but I need some help with a few tables, that I have not been able to find.
  
  While in the process control panel, each time I right-click a phase that the "History of process flow" option appears. If I choose what it a pop window with the historical records of this phase are displayed. I was wondering if it was possible to find that exact or tables so that I can manually build a query.
  
  Any help?
  
  Thank you guys

  I bet they are ID numbers that correspond to a level of process just as there are for different tasks of HFM identification numbers.

  I know that in order for me to come up with the associations of the name and the ID number of the task, I went in fact through ASP pages. For example, when you go to the review task page, there a drop down which shows all types of tasks. Guess what... If you look at the source code of this page, there is a list containing the names and identification numbers.

  I'd be willing to bet that you can do the same thing to determine the process ID / name of the associations.

  While I'm not a super pro on this product, I stayed in a Holiday Inn Express last night and I hope that this opinion is not send you on another goose hunt.

  Charles

• Hosting - Linux or MS

  Hello

  I bought my first Mac a few weeks ago (Yes me) and I bought Dreamweaver CS4 (Beginner).

  I've always used MS Frontpage in the past.

  My hosting company (1and1) gives me an option for hosting platform; Hosting Linux or Microsoft.

  I have to switch to Linux since I now use DW CS4?

  I really want to get out of all the products MS and technologies.

  Thanks for your help,

  Will be

  TennisWill wrote:

  I have to switch to Linux since I now use DW CS4?

  He takes, but you can if you wish. Pages created in Dreamweaver works on both Linux or Windows servers. I develop in Windows, but use a Linux server for my sites.

  The only reason for choosing a Windows instead of Linux server is if you want to create sites that use ASP or ASP.NET. If you want to use PHP, it is best to choose Linux. If you don't want to use any language server side, whatever you choose.

• Foreground of Oracle process to access data under Linux files

  As far as I know, processes user in an Oracle database running the application code, but the processes of database running Oracle database server code (server process analyze and execute the SQL statements issued through the app, read data of data files blocks and return the results to the application.) Background treats the archive logs, update the headers of all the data files to save the details of the control point, written content of the buffers of data files, runs the recovery if necessary, etc.)
  
  However, I could see the oracle user processes to access data files in my Oracle database. When I look for the processes to access data belonging to the tablespace files "recprov", I get the following:
  
  [root@ymir ~] # lsof | grep recprov
  Oracle Oracle 465 11u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 465 13u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 465 15u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 11u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 13u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 14u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 13364 14u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 13364 76u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 16445 17u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 16445 18u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 20522 REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659 82uW
  Oracle Oracle 20522 REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658 122uW
  Oracle Oracle 20532 44u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 20532 75u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 20534 17u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 20534 79u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  
  As you can see, there are 7 oracle processes that access data files: 4 processes user and 3 background processes:
  
  [root@ymir ~] # ps - ef
  ...
  Oracle 465 1 Jan27 0? 00:00:23 oracleessepr3 (LOCAL = NO)
  Oracle 964 1 Jan27 0? 00:00:25 oracleessepr3 (LOCAL = NO)
  Oracle 13364 1 0 Jan13? 02:45:02 oracleessepr3 (LOCAL = NO)
  Oracle 16445 1 0 Jan21? 00:00:05 oracleessepr3 (LOCAL = NO)
  20522 1 0 2009 Oracle? 00:09:59 ora_dbw0_essepr3
  20532 1 0 2009 Oracle? 00:04:24 ora_ckpt_essepr3
  20534 1 0 2009 Oracle? 00:04:10 ora_smon_essepr3
  ...
  
  And I confirmed this information from the data base repository:
  
  SQL > select p.SPID, SSE. TYPE, SSE. Username, SSE. MACHINE, SSE. PROGRAM
  session $ v ESS, v$ process p
  where p.SPID (465, 964, 13364, 16445, 20522, 20532, 20534) and SES. PADDR = p.ADDR;
  
  USER NAME OF TYPE SPID MACHINE PROGRAM
  ----- ----------- --------------- --------------- ---------------------------------------------------------
  20522 BACKGROUND dbserver (DBW0) oracle@dbserver
  20532 BACKGROUND dbserver oracle@dbserver (CKPT)
  20534 BACKGROUND dbserver oracle@dbserver (SMON)
  13364 USER DBSNMP dbserver emagent@dbserver (TNS V1 - V3)
  964 RECPROV USER appserver JDBC Thin Client
  16445 USER SYSTEM userPC PlSqlDev.exe
  465 RECPROV USER appserver JDBC Thin Client
  
  * RECPROV is the name of the user of the application database.
  
  My question is, why are there user processes to access data files? I think that it does not match the process architecture defined by Oracle. And most importantly, it does not mean a security leak in the database?
  
  DB version: 10.2.0.3, dedicated
  The Linux Version: Linux 2.6.18 - 53.el5xen #1 SMP Sat Nov 10 19:46:06 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
  
  Thanks in advance

  Hello

  There seems to be some confusion, even in the Oracle documentation, in terms of nomenclature.

  Think of it this way. There is the client program that connects to Oracle, such as SQL * Plus, Toad, custom, etc. written application. This program runs on the client. This may or may not be on the database server.

  Then there's the Oracle database server process. They run always on the database server. These processes are of two types, the USER and the background.

  You can see:

  SQL> select background,count(*) from v$process group by background;
  
  B   COUNT(*)
  - ----------
            65
  1         37
  

  Here are copies of the file binary oracle attach directly to the SGA and interact with database files. The binary oracle works with several different "personalities" based on the different purposes, he is currently serving. The type of background process, are divided into different specific methods for specific purposes.
  Yet once, observe:

  SQL> select pname from v$process where background = 1;
  
  PNAME
  -----
  PMON
  VKTM
  GEN0
  DIAG
  DBRM
  PING
  PSP0
  ACMS
  DIA0
  LMON
  LMD0
  
  PNAME
  -----
  LMS0
  LMS1
  RMS0
  LMHB
  MMAN
  DBW0
  DBW1
  LGWR
  CKPT
  SMON
  RECO
  
  PNAME
  -----
  RBAL
  ASMB
  MMON
  MMNL
  MARK
  LCK0
  RSMN
  GTX0
  SMCO
  W000
  RCBG
  
  PNAME
  -----
  QMNC
  Q001
  CJQ0
  Q005
  
  37 rows selected.
  

  Thus, each background process serves a different purpose. For example. DBW0 concerns only to write data from the buffer cache data files and maintaining all data structures associated with it. Each background process above serves a different purpose, I will not go into all. Generally, the background processes start up time of instance startup, even though some may be started on demand, at a certain time after the start of the proceeding.

  Now, consider a dedicated server model. When you connect to the database by using SQL * Plus, for example, you run the binary "sqlplus". Assume that you are connected via SQL * Net. In this case, sqlplus connects to the listener, the listener creates an oracle server process, type 'USER '. This process always runs on the database server. It runs under the user 'oracle', and it provides your real and direct interface to the database. This user can interact with the database and read the database files directly.

  Mainly, your server processes the USER will read the data from the cache buffers and, in the case of an absence of cache, will read the data in the data files and loading into the buffer cache. In addition, according to the code path, it can directly read or write to the datafiles, bypassing the buffer cache.

  So, the bottom line, all server (USER and BOTTOM) processes, interact with the database and associated files. The code of client program (sqlplus, Toad, etc.) NEVER directly interacts with the database.

  Hope that things cleared up.

  -Mark

• With the help of Toshiba Remote Control PX1246E-1ETC on Linux

  Hi there, I'm trying to use this remote in combination with Ubuntu 8.10. I don't yet know what media center software that I like to use. But is it possible to get this working to control remotely using Ubuntu? Hope someone has a positive experience with it.

  John

  Hello

  AFAIK this remote control is designed for use with Win XP and MCE (media center edition).
  I think you will not be able to use under Linux, but this is just my personal opinion.

  See you soon

• You can create a view that filters (ESX host) Linux machines on the view of the Infrastructure?

  Hello

  We have recently implemented Foglight and VMware plugin. As part of the VMware plugin, Foglight pulls in all the Linux VM machines including the ESX host. Our team of Linux only manages the running redhat Linux hosts. They fail the ESX VM guest. That said, is there a way to create a view that shows only the hosts running redhat Linux?

  For example the view of rail infrastructure below contains 88 Linux machines, but nearly half of them are ESX hosts for our Linux team would not see all these. Is it possible to filter these?

  

  Any help is appreciated.

  Thank you

  Tony

  The easiest way would be to create a personalized, pair it with Infrastructure and then create a dynamic management component.  This will help create you a rule for "All hosts" where you can find just the hosts that are not of the ESX host and run Linux.

  The query would be:

  detail.topologyTypeName! = "VMWESXServer" & os.longName like «% Linux»

• Zero space recover process 5.5 ESXi hosts

  Hi all

  What is zero process to recover space on ESXi hosts.  Storage team ask me to do this process zero space reclaim on ESXi hosts, this activity was conducted by my partner who has left the company.  Now, when I heard this line is completely new to me.

  Can someone help me how to do this. ??

  Thanks in advance.

  What you need is to run a command on vSphere ESXi host to retrieve blocks removed on LUNs provisioned thin, take a look: VMware KB: use esxcli in vSphere 5.5 and 6.0 to retrieve the deleted VMFS blocks on LUNs provisioned thin

  To better understand, have a look here: VAAI Thin Provisioning block Reclaim/cancel the MAPPING in Action - VMware vSphere Blog - Articles of VMware

• Oracle DB 11 g 2 controls prerequisites failed - Oracle Linux 6.5

  Hi all

  Once again stuck with questions during the installation of 11 GR 2 DB.

  1. Swap size - failed
     Details:
     Size of swap - it is a prerequisite to check if sufficient total swap space is available on the system.
     Expected value: 7.74 GB (8120228,0 KB)
     Real value: 7.7 GB (8077308,0 KB)
     
     My checks:
     # SH - 4.1 swapon s
     Size of the characters in filename used priority
     / dev/DM-1 partition 8077308 0-1
     SH - 4.1 # cat/proc/swaps
     Size of the characters in filename used priority
     / dev/DM-1 partition 8077308 0-1
     SH - 4.1 # cat/etc/fstab. grep swap
     / dev/map/vg_vssdbserver-lv_swap swap swap defaults 0 0
     
     I thought that 8 GB of swap space was enough, my system has 8gbRAM.

  As a general rule, swap space is usually configured to twice the RAM if you use 8 GB or less and equal to the amount of RAM if you have 16 GB or more. If you have 64 GB of RAM, however, it is useless to have 64 GB of swap space, because the loss of performance so you never need to swap space will be very bad.

  However, you probably want to configure your Oracle database to use the kernel Hugepages using EAMA instead of the AMM for optimal performance and efficient use of memory. Hugepages kernel, unlike the POSIX memory shared (/ dev/shm) used by the AMM will be pre-allocate memory to start the system upward and can not use swap space. Don't forget that the swap space is not a substitute for the lack of physical memory (RAM).

  On the Oracle database installation, there should be a button to ignore warnings or errors and continue the installation or if you feel more comfortable with it, to meet this control, simply create a temporary swap file to increase your swap space, which later can be removed when you no longer need. It is certainly much easier than to the resize your swap partition.

  For example:

  [root@vm213 ~] # lsb_release d

  Description: Oracle Linux Server version 6.5

  [root@vm213 ~] # swapon s

  Size of the characters in filename used priority

  / dev/DM-1 partition 2097148 0-1

  Create a pagefile of 1 GB in / Home

  [root@vm213 ~] # dd if = \u003d/dev/zero of / home/swapfile bs = 1024 count = 1048576

  1048576 + 0 records in

  1048576 + 0 records out

  1073741824 bytes (1.1 GB) copied, 4.32366 s, 248 MB/s

  [root@vm213 ~] # chmod 600/home/swapfile

  [root@vm213 ~] # ls-l/home/swapfile

  -rw-------. 1 root root 1073741824 28 May 03:07 / home/swapfile

  [root@vm213 ~] # home/mkswap/swapfile

  mkswap: / home/swapfile: caution: do not erase the sectors bootbits

  all over the disk. Use f to force.

  Implementation of version 1 of swapspace, size = 1048572 KiB

  no label, UUID = d26f4d5f-af46-4567-b836-0d5d0b1661cb

  [root@vm213 ~] # home/swapon/swapfile

  [root@vm213 ~] # swapon - a

  [root@vm213 ~] # swapon s

  Size of the characters in filename used priority

  / dev/DM-1 partition 2097148 0-1

  / home/file swapfile 1048572 0-2

  If you want to enable the pagefile at system startup:

  [root@vm213 ~] # cp/etc/fstab /etc/fstab.backup_'date + %N '

  [root@vm213 ~] # echo "/ home/swap file, swap swap defaults 0 0' > / etc/fstab"

• Client computers freeze momentarily but regularly - 14.10 Ubuntu x 64 host, Linux and Windows clients

  Hello.  I use Workstation for many, many years, so I would say I have my set reasonable expectations.

  My main desktop computer:

  -Processor Intel i7 (4950 I think), memory of 16G, Samsung 850 SSD Pro, operating system Ubuntu x 64 VMWare Workstation 11.1 14.10

  It works really well, but my client machines, be it Windows 7 business or Ubuntu LTS 14.04 frequently "stutter" in use.  When the stuttering happens, the host machine is relatively high projection of CPU on vmware-vmx, 15 or 20 according to 'top '.  Stuttering can happen every minute or two, perhaps 5 to 10 seconds at a time.  It's boring, but when I use the CAD software in the computer of the customer it is downright dangerous as shortcut keys get failed, partially or entirely, and usually bad things come.

  I can watch or try to stop this stuttering?

  Thank you!

  I'll call this resolved - finally.  I thought I was going to have to continue to use Virtual Box forever - a sad perspective.  This problem has persisted in 12 Pro Version as well.

  I can't believe I'm the only one having this problem - especially when its the password on both machines - 2 for 2.  In fact I found someone else having this problem:

  VMware workstation 11 on Ubuntu 15.04 high utilization of the processor resolved

  VMware workstation on Ubuntu with windows guests 11 freezes from time to time with very high CPU usage. The vmware-vmx and khugepaged process get time cpu 100% for a few seconds. The khugepaged is the process that configures the transparent hugepages. When I turn off the transparent windows hugepages prompt without freezes again. To turn off on each operating system starts I put in /etc/rc.local

  ##################

  If f/sys/kernel/mm/transparent_hugepage/enabled test; then

  never echo >/sys/kernel/mm/transparent_hugepage/enabled

  FI

  If test-f/sys/kernel/mm/transparent_hugepage/defrag; then

  never echo >/sys/kernel/mm/transparent_hugepage/defrag

  FI

  ##################

  Solved

• bottom of flashplayer internal update server hosted Linux apache2 - flashinstall.log errors

  Hello everyone,

  I've implemented an internal server update for Flash Player as described in the latest guide admin (v16).

  The web server that hosts the files of the last fp_background_update.cab is apache2 on SLES11.

  I configured a customer (win7sp1, fully patched) with mms.cfg pointing to the Web server. There v14 drive installed, activex and plug-in.

  The client using any browser, I can see and download files from the Web server.

  But information update does not install the more recent version, flashinstall.log shows that Web server is contacted and that xml files are processed, but it produdes warning and error codes for which I can't find any documentation, so type in the dark here.

  When you look at the Web server logs I can see more of behavior:

  -Customer pulls the majorversion.xml and the version.xml for new version (v16) - OK

  -The client tries to pull a patch.xml, which does not exist in the fp_background_update.cab. -STRANGE

  -Customer pulls the patch.xml (that I've provided manually by downloading it via wget for webserver) - OK

  -The client tries to shoot whatever it is and causes webserver error 400, which means generally bad customer demand - BAD

  It is access-log Web server without and with patch.xml provided:

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau//currentmajor.xml HTTP/1.1" 200 58 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/version.xml HTTP/1.1" 200 410 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/patch.xml HTTP/1.1" 404 1051 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:33:01 + 0100] "GET / ' 400 984 ' - ' -"

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau//currentmajor.xml HTTP/1.1" 200 58 '-' ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/version.xml HTTP/1.1" 200 410 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:46 + 0100] "GET /pub/flashplayer/update/current/sau/16/xml/patch.xml HTTP/1.1" 200 823 "-" ' Get Flash Player version xml/1.0 ".

  -[12/Feb / 2015:10:35:47 + 0100] "GET / ' 400 984 ' - ' -"

  It's flashinstall.log without and with patch.xml provided:

  2015 2-12 + 9-33-1, 406 [info] internal 1628 - server.domain

  2015 2-12 + 9-33-1, 406 [info] internal 1629 - server.domain

  2015 2-12 + 9-33-1, 406 [info] 1614

  2015 2-12 + 9-33-1, 406 [info] 1615

  2015 2-12 + 9-33 - 1.469 [info] 1618

  2015 2-12 + 9-33 - 1.469 1619 1063 [info]

  2015-2-12 + 9-33 - 1.484 [info] internal 1628 - server.domain

  2015-2-12 + 9-33 - 1.484 [info] internal 1629 - server.domain

  2015 2-12 + 9-33 - 1.484 [info] 1614

  2015 2-12 + 9-33 - 1.484 [info] 1615

  2015 2-12 + 9-33 - 1,500 [info] 1618

  2015 2-12 + 9-33 - 1,500 [info] 1604

  2015 2-12 + 9-33 - 1,500 [info] 1608

  2015 2-12 + 9-33 - 1,500 [info] 1631 /pub/flashplayer/update/current/sau//currentmajor.xml

  2015 2-12 + 9-33-1, 609 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/version.xml

  2015 2-12 + 9-33-1, 609 [info] 1632

  2015 2-12 + 9-33-1, 609 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml

  2015 2-12 + 9-33-1, 609 [warning] 1445

  2015 2-12 + 9-33-1, 625 [warning] 1442

  2015 2-12 + 9-33-1, 625 [info] 1632

  2015 2-12 + 9-33-1, 625 [info] 1600

  2015 2-12 + 9-33-1, 625 1214 12152 [error]

  2015 2-12 + 9-33-1, 625 [error] 1234 0

  2015 2-12 + 9-33 - 1,640 [info] 1612

  2015 2-12 + 9-33 - 1,640 [info] 1620

  2015-2-12 + 9-35 - 45.987 [info] internal 1628 - server.domain

  2015 2-12 + 9-35-46, 2 [info] internal 1629 - server.domain

  2015-2-12 + 9-35-46, 2 [info] 1614

  2015-2-12 + 9-35-46, 2 [info] 1615

  2015-2-12 + 9-35-46, 2 [info] 1618

  2015-2-12 + 9-35-46, 2 1619 1063 [info]

  2015-2-12 + 9-35 - 46,18 [info] internal 1628 - server.domain

  2015-2-12 + 9-35 - 46,18 [info] internal 1629 - server.domain

  2015 2-12 + 9-35 - 46,18 [info] 1614

  2015 2-12 + 9-35 - 46,18 [info] 1615

  2015-2-12 + 9-35-46, 33 [info] 1618

  2015-2-12 + 9-35-46, 33 [info] 1604

  2015-2-12 + 9-35-46, 33 [info] 1608

  2015-2-12 + 9-35-46, 33 [info] 1631 /pub/flashplayer/update/current/sau//currentmajor.xml

  2015 2-12 + 9-35 - 46.143 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/version.xml

  2015 2-12 + 9-35 - 46.158 [info] 1632

  2015 2-12 + 9-35 - 46.158 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml [info]

  2015 2-12 + 9-35 - 47.110 [info] 1632

  2015 2-12 + 9-35 - 47.110 [info] 1600

  2015 2-12 + 9-35 - 47.125 1214 12152 [error]

  2015 2-12 + 9-35 - 47.125 [error] 1234 0

  2015 2-12 + 9-35 - 47.125 [info] 1612

  2015 2-12 + 9-35 - 47.125 [info] 1620

  Hope someone can help and provide documentation of the error codes for the background update or has any ideas, I'm bytting my teeth on this :-)

  Thank you all

  concerning

  Lars

  Lars salvation,

  According to your server logs files, only the XML file is retrieved.  The server logs have nothing for the Setup file itself, which is what the mistakes are referring to.

  1214 error means that the Setup log file failed to download.  The number of 12152 beside him is a Microsoft error code, which is:

  ERROR_HTTP_INVALID_SERVER_RESPONSE

  The response from the server could not be parsed.

  Error 1234 means the Update ActiveX failed.  Updates from bottom tent always first Update ActiveX (if installed).  Given that the Setup file can't download, the update is also a failure.

  How do you have your server configured?  Please ensure that port 80 is open for HTTP requests (for the Installer).  Since your getting the XML file, it seems that you already have open port 443 for HTTPS requests.

  --

  Maria

• How to find the IP address of the virtual machines from the host Linux

  Hello

  Y at - it a tool that can resolve the IP address of the linux host running VMS, when using NAT and DHCP networking?

  I can find by logging on virtual machines, but I need to retrieve automatically these addresses for the host scripts will not have to be changed manually when IPs change.

  Thank you

  Host: Ubuntu 8.10 64 bit, WS6.5

  Probably the easiest solution is to use static IP addresses... Having said that, what I meant was:

  Each machine (real and virtual) has a unique MAC address. If I create a file (database type) with the name and the MAC address of each virtual machine, then I could use nmap or arp commands to get the IP address. For example, I create a table and put it in a file like this:

  VMName1 00:14:BF:19:45:61

  VMName2 00:0E:5 C: 1 has: 44:1E

  Name of the machine 3. etc.

  Then I could run a combination of arp and/or nmap to find the MAC address of active machines and their respective IP addresses. For example, running:

  sudo nmap - sP 10.0.2.0/24

  This gives on my local network:

  Starting Nmap 4.76 ( http://nmap.org ) at 2009-08-14 18:09 EDT

  Host 10.0.2.1 seems to be upward.

  MAC address: 00:14:BF:19:45:61 (Cisco-Linksys)

  Host 10.0.2.99 appears to be upward.

  MAC address: 00:10:83:BB:08:99 (Hewlett-Packard Company)

  Host 10.0.2.130 appears to be upward.

  MAC address: 00:0E:5 C: 1 has: 44:1E (Motorola BCS)

  Host 10.0.2.134 appears to be upward.

  Nmap done: 256 IPS (4 hosts upward) scanned at 3.71 seconds

  So, now, I know that the machine VMName1 with MAC 00:14:BF:19:45:61 has IP 10.0.2.1 and is it my Linksys router.

  Just a thought.

• How to change the network card eth0 eth1 on host (Linux Debian 5 "lenny") til

  Hello

  I just installed the server VMWare 2.0.1 for Linux 64 - bit version on my Linux Debian 5 "Lenny".

  The host is also my firewall and unfortunately I was a bit quick in accepting the default settings, and this is why I agreed for the network card eth0.

  I just installed my first virtual Ubuntu 8.10, but I can't see LAN, the virtual server is hung on the WAN card op.

  How can I change this?

  Just re-run the script vmware - config.pl who will take you through the network configuration again. Note to all virtual machines powered off.

  Guy Leech

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Citing long lived process control folder?

  Hello

  I have to build a long term process that begins when the xml data are filed in a folder.

  Once the XML is received, it must be entered in the form and assigned as a task of process management.

  Long-term process should be defined with an endpoint Manager task, but using looked the file to invoke the process it's a control folder...

  How can I set such a process?

  Thank you, Yan

  Hi Yan,

  in fact, the process has no need to have a task manager endpoint. Task Manager endpoint is used only if you want users to start the process from the workspace.

  For your process, use a control folder end point. In the process, the first step is surgery Assing task that uses the xml data you deposited in the watched folder (assuming that the xml is in the correct structure for the form you are using).

  Scott