HFM process control

Similar Questions

• the user running the export / HFM process

  Hello world
  
  We need export data on a network share to HFM.
  Informing Department they need to give him access to the network share that I need to specify (in general) - out of HFM, let's use vbscript Rulesfile to create a file and write lines in there.
  
  In general: what user SYSTEM (for example in taskmanager the user running the process in the operating system and of course not the user of shared services) will write this file? For example, in essbase, it is the user who runs the process essbase = > here I know;).
  
  -C' is the user who runs the HFM process? Is there any special device for export / when the rules file is run?
  -It is usually the user which was used during the installation?
  -is the general system user?
  
  I am unfortunately not able to log the servers directly to have a glance - but I just need to ask the right questions of the installation team.
  
  All responses are much appreciated.
  
  Thanks & BR,
  Julius

  If you use WriteToFile in HFM rules, the file is generated by the user DCOM of HFM. Thus, the DCOM user must have write access to any network share, you want the output files to, and then all human users should have access to the same share.

  -Chris

• How HFM process records

  On a learning curve, I'm playing with the consolidation rules and debugging.

  In order to understand the functioning of HFM, I added the following rule of consolidation, with the appropriate WriteToFile sub().

  Void Consolidate()

  Dim MyDataUnit

  Dim lNumItems

  Set MyDataUnit = HS. OpenDataUnit("")

  lNumItems = MyDataUnit.GetNumItems

  for i = 0 to lNumItems-1

  Call MyDataUnit.GetItem (i, strAccount, strICP, strCustom1, strCustom2, strCustom3, strCustom4, dData)

  Call WriteToFile ("Line 1;" & lNumItems & ";" & i & ";" & strAccount & ";" & strICP & ";" & strCustom1 & ";" & strCustom2 & ";" & strCustom3 & ";" & strCustom4 & ";" & dData)

  next

  EndSub

  After running a consolidation my result file looks like this

  Line 1; 258; 1; Sales; [ICP no]; P3000_Phones; Comma_Phone_Stores; Retail_Direct; [None]; 15887.488716; 08/08/2013-13:36:40

  Line 1; 258; 2; Sales; [ICP no]; Comma_PDAs; Electronic_City; National_Accts; [None]; 19239.0919236; 08/08/2013-13:36:40

  Line 1; 258; 3; Sales; [ICP no]; Comma_PDAs; Radio_Central; National_Accts; [None]; 21959.2720157; 08/08/2013-13:36:40

  Line 1; 258; 4; Sales; [ICP no]; Comma_PDAs; Western_Electronics; National_Accts; [None]; 24728.9099251; 08/08/2013-13:36:40

  Line 1; 21; 0; Wages; [ICP no]; [None]; [None]; [None]; [None]; 5997.2854618; 08/08/2013-13:36:40

  Line 1; 258; 5; Sales; [ICP no]; Comma_PDAs; Freds; National_Accts; [None]; 4955.7155768; 08/08/2013-13:36:40

  Line 1; 21; 2; Legal; [ICP no]; [None]; [None]; [None]; [None]; 237.3450281; 08/08/2013-13:36:40

  Line 1; 21; 3; Housekeeping; [ICP no]; [None]; [None]; [None]; [None]; 84.0907017; 08/08/2013-13:36:40

  Line 1; 258; 6; Sales; [ICP no]; Comma_PDAs; Power_Price; Distributor_Sales; [None]; 13046.6934218; 08/08/2013-13:36:40

  ...

  My first entity has (INumItems) 258 records, 21 second.

  I expect the system to work through each feature in a sequential order, but I see them intertwined. So my first question

  (1) is due to a parallel processing?

  the numbers I have loaded are different. For example, for the first line, I loaded the amount 15887.48871 and not 15887.488716

  (2) where is this 6 coming from?

  Thanks in advance for any idea,

  Patrick

  Yes, I could say, HFM uses a PARALLEL treatment.  It's difficult handwriting of newspapers.  I think that the treatment is shared between the entities, although I have not really dug too deep into it.  You will need to modify the writetofile routine to write a separate log for each entitiy confirm.

  As that 6 in the end, you are course that is has not been responsible for this way in the system?  In addition, it is the routine of consolidation, which means that it is to translate.  Is it possible that is the result of exchange rates?

  Go to a grid, explore the this intersection, right click and click on information of the cell.  At the bottom it will show you the data displayed, stored data and data full resolution.  The last two are probably the 6 extra.

• Citing long lived process control folder?

  Hello

  I have to build a long term process that begins when the xml data are filed in a folder.

  Once the XML is received, it must be entered in the form and assigned as a task of process management.

  Long-term process should be defined with an endpoint Manager task, but using looked the file to invoke the process it's a control folder...

  How can I set such a process?

  Thank you, Yan

  Hi Yan,

  in fact, the process has no need to have a task manager endpoint. Task Manager endpoint is used only if you want users to start the process from the workspace.

  For your process, use a control folder end point. In the process, the first step is surgery Assing task that uses the xml data you deposited in the watched folder (assuming that the xml is in the correct structure for the form you are using).

  Scott

• Process control - level review status

  Is there a way to watch 'level Review' (the same as the control of the processes in the workspace) of individual entities through smart view?
  
  Thank you

  It is possible in Ad - hoc mode only, i.e. you cannot use functions hsgetvalue to my knowledge. It is available by selecting Hyperion-> Options and the view tab allows you to display the data, status of calc, or process management. If you use presentations by steps, you select an account in the stage to display the level of the respective processes.

  JOINT TASK FORCE

• Resources approval process control

  Hi all
  
  Have two objects in resource, RO1 & RO2
  Two ROs has their own process of approval and disposition process.
  
  I have this affect resources through groups and access policies. (i.e. Group1 will call a strategy of access and this access policy, RO1 will be granted, Group2 will call a strategy of access and this access policy, RO2 will be granted)
  
  Senario:
  When a new user is created, Group1 be automatically assigns to the user. Then the RO1 approval process will be called.
  
  User then go to the "Member of the group" and Group2 menu item assign to the same user. Then, the RO2 approval process will be called.
  
  But, RO1 must be first be granted to the user, before you give RO2. (if granted before RO1 RO2, then error will be fired)...
  
  So if the RO2 approver approves the request before the RO1 approver approves its approval, error will occure.
  
  So what I wanted to do are to control this flow or approvals.
  
  Currently, I have no solution or idea for this.
  
  Is there a way to stop the process of approval of RO2, until approval of the RO1 granted?
  
  Help, please...
  
  Kind regards
  Chaturanga

  It depends on a little bit of what your needs are.

  You can refuse the request of RO2 (as stated Rajiv) or you can put RO2 in readiness until the moment where RO1 is approved. The easiest way to implement the second requirement is to put a brake in the provisioning code service that checks whether all the pre reqs are met and if not locks the task in readiness. Create a scheduled task that "harvesting" tasks stuck in commissioning and checks whether the task can be released.

  Hope this helps
  / Martin

• process control of a host linux in vFoglight

  Hello:
  I am currently able to monitor the process for my Windows VMS by following these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard enter the administrator username and password and you sure
  Windows is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that WMI is checked.
  And then you click on finish. In about 15 minutes, I am able to see the processes running on the computer, etc.. I don't need to install a
  Foglight agent components.

  Now when I try and do the same thing with a linux host, that I'm not always able to see one of the running processes. To the linux host I follow these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard by entering in the root username and password and you sure
  Linux is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that the
  SSH port is set to 22. Click Next. And then you click on finish. After waiting for a long time, nothing never appears. I am able to ssh to this virtual machine
  of all over my network.

  So, it is possible to monitor the process in a Linux VM (without having to install an agent) as I can monitor a Windows VM?

  Thank you.

  Mark

  SSH enabled for the root user?
  If you go on the dashboard of the comment process within the vFoglight console (left under Homes Board) see you alarms in the upper right?
  If so, say the alarm?
  Can solve you the VM name that is presented in the machine vFoglight vFoglight? If the name is larry.mydomain.com in the vFog console, I need to make sure that I can ping and resolve this computer of the machine vFog.
  -Larry

• Running process control

  I have a button of execution that makes a shipment. I have a 'After Submit' process that the below code to run a report.
  Some of my reports take a little time to run and I find some of my impatient users hit the button several times and it seems to create some problems in the database. Is it possible to have the enforcement process when the user press the run button, but not yet to the end after 'apex_util.download_print_document' report view?
  
  () apex_util.download_print_document
  p_file_name = > l_form,
  p_content_disposition = > 'attachment ',.
  p_application_id = >: APP_ID,.
  p_report_query_name = > nvl (l_report_query_name, l_form).
  p_report_layout_name = > nvl (l_report_layout_name, l_form).
  p_report_layout_type = > 'rtf ',.
  p_document_format = >: P507_OUTPUT_FORMAT);

  Something along those lines might work

  Create a page element hidden named RPT_STATUS
  Change the process of the page with the call to apex_util.download to be

  apex_util.set_session_state('RPT_STATUS','N');
  apex_util.download_print_document(
  p_file_name => l_form,
  p_content_disposition => 'attachment',
  p_application_id => :APP_ID,
  p_report_query_name => nvl(l_report_query_name,l_form),
  p_report_layout_name => nvl(l_report_layout_name,l_form),
  p_report_layout_type => 'rtf',
  p_document_format => :P507_OUTPUT_FORMAT);
  apex_util.set_session_state('RPT_STATUS','Y'); 
  

  Define a process to request with the name "GETREPSTATUS" with the following code

  begin
  htp.prn(v('RPT_STATUS'));
  end;
  

  Change the JS has suggested earlier to be

  CITY

• Process control API

  Hi all
  
  Oe_order_pub.process_order can be used to update the FDF to the level of the line after the closing of the command line. If so please suggest me how to do this.

  VV
  You should be able to do as we do front end. Make sure that the value of the profile of this OM profile: generic Update constraints apply to de FACTO forces? a the appropriate as no value

  Thank you
  Claire

• How to select the entity for the management of the process of HFM?

  Hi all

  I have a confusion as I know, a process allowing management to the statement my Scenerio metadata property. Now let's say I have an application with more than 800 members of the entity in the entity Dimension. Now that all entities will require to have process management, how can I decide?

  Help, please.

  Thank you

  Zitouni

  Hello. Once you enable for the scenario of all entities will require from, promotion, etc.. Process control screen allows you to apply patches to the selected entities and his descendants, so it is not difficult.

  Eric

• Control of filter according to the level of the exam process

  Hello

  Can someone tell me how to put the filter in process control, so I can filter the display by levels of review?

  Sometimes I see it and sometimes I don't have and I do not know what triggers this settings option.

  Thank you

  Laila

  Hello. In process control, you want to change the display of the tree to the list. Then, you can filter by level of review.

  Eric

• Phases of submission * not listed is not in control of the process

  Hello
  
  Can someone help me pls on this.
  
  I assigned two presentation groups (3,4) to take account of the custom members,
  Some use presentation and SupportSubmission stages phases account, Custom1, 2.
  Entrusted presentation group3 for phase 1 and group phase2 January 4 real, to manage the submission phases,.
  
  I am able to see that the phase 1 process control, but not phase2.
  
  
  
  Thanks in advance.

  If you click on options, then on the collar tab, you should be able to choose how many phases show on the grid.

• HFM 11.1.2.3 deployment error

  Hi all

  Version: HFM 11.1.2.3

  While deploying the HFM - application of EPMA sample, I get the error below? Anyone could confront the question below? Please help me

  Error Reference number: {EB1CCB4F-A9F6 - 46 d 7-8180 -EDB4442931E1}

  Num: 0 x 80040225; Type: 0. DTime: 16/08/2013-13:13:21; SVR: xxx. File: CHsxServer.cpp; Line: 1702; Worm: 11.1.2.3.000.4045;

  Num: 0 x 80040225; Type: 0. DTime: 16/08/2013-13:13:21; SVR: xxx. File: CHsxServer.cpp; Online: 1579; Worm: 11.1.2.3.000.4045;

  Num: 0 x 80040225; Type: 0. DTime: 16/08/2013-13:13:21; Svr: xxx; File: AgentHelper.cpp; Line: 769; Worm: 11.1.2.3.000.4045;

  Num: 0 x 80040225; Type: 0. DTime: 16/08/2013-13:13:21; Svr: xxx; File: CHfmAwbAgent.cpp; Online: 567; Worm: 11.1.2.3.000.4045;

  
  

  
  

  Please do the steps below to solve problems.

  (1) to connect to the ORACLE database using the user sys or system:

  sqlplus system / .

  (2) to confirm the values of PROCESS and SESSIONS, run the following script:

  SQL > select name, value of the parameter $ v whose name ('processes,' sessions ');

  (3) run the following commands to define PROCESSES and SESSIONS on a higher value:

  SQL > change processes control system = 300 scope = spfile;

  SQL > alter system sessions = 300 scope = spfile;

  (4) restart the ORacle database to reflect the changes

  (5) in order to confirm the new values of re - run the in.step script 2.

• ERPi landing page is empty when drilling of HFM/Smart View

  All,

  We implement ERPi 11.1.2.2.3 and have successfully used to load data from a source Oracle GL system in to a HFM 11.1.2.2.3 target system.  We have tested and experienced that pierce the works of Oracle GL of the loading of data established by clicking on the hyperlink source amount.  However, when we try to break through to the ERPi landing page of a grid of data HFM, shape or Smart View using the drill by the ERP Integrator option, the landing page says "No Data to display" in Pierce through summary and drill through the details of the form.

  We missed one configuration step in ERPi?

  Thank you in advance for your help!

  Mariko

  It turns out that this problem was caused by two things:

  1) ensure that your security is set on activate via drill with ERPi

  (2) the drill by POV is case-sensitive - if you use a grid of Smart ad hoc View, you must assign your POV exactly the name of the Member (I tend to type in lower case all the when you use an ad hoc network, when in reality, the members are a mix of upper and lower case)

  Who said: I noticed that in HFM 11.1.2.2.3 the POV selection in grids of data (and also process control) affects your selection to lowercase for the scenario, vision, value and many of our custom dimensions.  I don't know if it's a bug or a configuration problem (the POV has case-sensitive appropriate forms of data), however, you can avoid drill - through data grids.

  Thank you

  Mariko

• Satellite Pro A200: Can I disable FN keys process

  Hello

  I recently bought this laptop. I have the default software installed. However, I don't like the help keys fn (software). It's very pretty, but it uses a lot of resources and it lags behind when in mode 'power save '. There the _anything_ can I do to change? Install more ugly software, but have more performance? Thanks for the quick response.

  P.S. It looks like this of the fn keys and process controls called TCrdMain.exe gui. However, it seems quite strange, because I think that this process is used for the card player media, isn't it?

  The tcrdmain.exe is a process that controls the keys FN and the TOSHIBA Flash Cards.
  The Toshiba flash cards is a utility that appears on the edge of the top of the screen in Windows Vista.

  You can turn it off if you think that it of not useful to you, but there is no other programs that could control the FN keys!

  Concerning