Process does not perform an update.
I have this process of PL/SQL in my page:UPDATE tag_order
SET order_date = SYSDATE
WHERE order_number =: P16_Order_Number;
COMMIT;
Unfortunately, it does not perform the update. What could be wrong?
FYI: In order to access the page where this process, you first go to a page that contains an area of report interactive (Page 15). When you click on one of the lines in this part of the report, page 16 is loaded and the: P16_Order_Number element loaded with the order number on the report page. I don't know if that has anything to do with the problem, but I mention it because: P16_Order_Number is referenced in the update statement. The session state is not defined?
Any advice would be appreciated. Thank you.
Hello
And, if send you the page and then check the session state for the page elements, P16_ORDER_NUMBER always appears good value?
Do you have a process of "reset...". "on the page that runs before your own process that performs the update?
Andy
Tags: Database
Similar Questions
-
I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.
Here is my BIOS information.
"Manage 0 x 0031, DMI type 0, 24 bytes.
BIOS information
Seller: LENOVO
Version: JBET54WW (1.19)
Release date: 06/11/2015
Address: 0xE0000Runtime size: 128 kB
ROM size: 16384 KB
Features:
PCI is supported
PNP is supported
BIOS is extensible
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
ACPI is supported
Legacy USB is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS version: 1.19
Firmware revision: 1.2 "What could you suggest to get the update disc to recognize my system?
I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.
I hope this helps someone stuck in a similar situation.
-
Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.
In addition, the HID-Compliant touch screen driver is missing.
Please help me solve this problem, thank you.
Hi there @BryanHech,
Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .
How you did update the drivers?
You use Windows Update?
Have you checked to see if the driver has been disabled?
Have you tried to run the Troubleshooter in Windows?
Have you tried to do a hard reset?
Have you tried a update the BIOS and graphics driver?
Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?
Have you tried to Configure the display key?
Have you tried to activate the driver in touch screen device manager?
Please follow these steps to see if you can activate the touch screen:
- Open the Device Manager
- Find "Human Interface Devices"
- Expand "Human Interface Devices"
- Right-click on "touch screen HD compliant."
- Click 'Activate' (if available)
- Restart your laptop.
If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.
To use the system restore in Windows:
- Go to the Search
- Type of Control Panel
- Click on Control Panel
- Click System
- Click on the System Protection
- Click the System Protection tab
- Click on System Restore
- Click Next
- Choose a restore point
- Click Next
- A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
- Click Yes to confirm
When the system restore is complete, you'll be up a pop that says that it has been completed.
Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.
Thank you!
-
HsxServer process does not start
Hello
While creating a hfm application in administration of Consolidation, I am facing problem as shown in the screenshot. I increased the number of processes, open_cursors to the oracle database. (no luck)
In the process, HsxServer.exe process does not work.
all running processes
DMEListener.exe
HfmAdmHandler.exe
HFMWebServiceManagr.exe
HsxService.exe
Servcie FinancialManagementWeb
CASSecurity.exe
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\hfm
HsvEventLog:
Error * 11 * hyp_admin * 06:47:12 * HfmADOConnection.cpp * 16/09/2014 Line 591 * <? XML version = "1.0"? >
< C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < / C'estr >
Error * 11 * hyp_admin * 06:47:12 * CHsxSQLConnectionPool.cpp * 16/09/2014 Line 375 * <? XML version = "1.0"? >
< C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 375 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Error * 11 * hyp_admin * 06:47:12 * CHsxServerImpl.cpp * 16/09/2014 Line 111 * <? XML version = "1.0"? >
< C'estr > < Ref > {96AD0010-6856-42EE-ABD1-85C2B023436C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 375 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2146824582 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:12 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 111 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Error * 11 * hyp_admin * 06:47:15 * HfmADOConnection.cpp * 16/09/2014 Line 591 * <? XML version = "1.0"? >
< C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < / C'estr >
*
Error * 11 * hyp_admin * 06:47:15 * CHsxSQLConnectionPool.cpp * 16/09/2014 Line 585 * <? XML version = "1.0"? >
< C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Error * 11 * hyp_admin * 06:47:15 * CHsxServerImpl.cpp * Line 16/09/2014 8813 * <? XML version = "1.0"? >
< C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Error * 11 * hyp_admin * 06:47:15 * CHsxServer.cpp * 16/09/2014 Line 93 * <? XML version = "1.0"? >
< C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServer.cpp < / file > < line > 93 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Error * 11 * hyp_admin * 06:47:16 * CHsxServerImpl.cpp * 16/09/2014 Line 229 * <? XML version = "1.0"? >
< C'estr > < Ref > {676EE1CC-3BDC-454F-BA07-E9BC482B008F} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2146824582 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > HfmADOConnection.cpp < / file > < line > 591 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > provider cannot be found. It cannot be installed correctly. < / DStr > < / CSEC > < CSEC > < Num >-2147215616 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxSQLConnectionPool.cpp < / file > < line > 585 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 8813 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 0 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServer.cpp < / file > < line > 93 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < CSEC > < Num >-2147215936 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:15 < / DTime > < Svr > HYPERION-4 < / Svr > < file > CHsxServerImpl.cpp < / file > < line > 229 < / line > < worm > 11.1.2.3.000.4045 < / worm > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:32 * IOCPServer.cpp * Line 419 * <? XML version = "1.0"? >
< C'estr > < Ref > {8B984CED-A0CC-4AA6-8D68-8B3B2C1C2373} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287486 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:32 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 419 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv4 < / DStr > < UPS > < Param > listening FM - DME Hyperion service stopped on the port: 9097 < / Param > < / UPS > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:33 * IOCPServer.cpp * Line 419 * <? XML version = "1.0"? >
< C'estr > < Ref > {6E3DFF1E-C1F3-44AE-8F27-577835C16F1C} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287486 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:32 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 419 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv6 < / DStr > < UPS > < Param > listening FM - DME Hyperion service stopped on the port: 9097 < / Param > < / UPS > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:37 * DMEListener.cpp * Line 797 * <? XML version = "1.0"? >
< C'estr > < Ref > {541C13AD-B154-44D7-8A14-948F276133DC} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287493 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > DMEListener.cpp < / file > < line > 797 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < has successfully started the Service listening for Param > Hyperion FM - DME. < / Param > / UPS > < / CSEC > < / C'estr >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 246 * <? XML version = "1.0"? >
< C'estr > < Ref > {A3C1B652-440B-4753-A2E3-A47474782C71} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287499 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 246 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < Param > family IP: Port IPv4 number: 9097 number of connections: 4 < / Param > < / UPS > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 369 * <? XML version = "1.0"? >
< C'estr > < Ref > {CC4CA21B-E339-422E-B534-0C775731E38E} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287485 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 369 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv4 < / DStr > < UPS > < Param > Hyperion FM - DME service listen started on port: 9097. < / Param > < / UPS > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 246 * <? XML version = "1.0"? >
< C'estr > < Ref > {2B55FC01-6BE0-4FB7-9A1F-BD8D69E5D2B4} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287499 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 246 < / line > < worm > 11.1.2.3.000.4045 < / worm > < UPS > < Param > family IP: Port IPv6 number: 9097 number of connections: 4 < / Param > < / UPS > < / CSEC > < / RTSs >
*
Information * 11 * SYSTEM * 16/09/2014 06:47:37 * IOCPServer.cpp * Line 369 * <? XML version = "1.0"? >
< C'estr > < Ref > {B5D732D0-8852-441F-88FE-FF71F5C98230} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num > 287485 < / Num > < Type > 1 < / Type > < DTime > 16/09/2014 06:47:37 < / DTime > < Svr > HYPERION-4 < / Svr > < file > IOCPServer.cpp < / file > < line > 369 < / line > < worm > 11.1.2.3.000.4045 < / worm > < DStr > family listener: IPv6 < / DStr > < UPS > < Param > Hyperion FM - DME service listen started on port: 9097. < / Param > < / UPS > < / CSEC > < / RTSs >
*
HFM. ODL:
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 375] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 375] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13:47:12 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 111] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServer.cpp] [line: 93] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-800A0E7A] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: HfmADOConnection.cpp] [line: 591] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString: provider cannot be found.] May not be properly installed.] [paramString:] An unknown error has occurred. (- 2146824582)
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM-80041700] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxSQLConnectionPool.cpp] [line: 585] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxSQLHelper object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 8813] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServer.cpp] [line: 93] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:15 - 07:00] [EPMFM] [ERROR: 16] [HFM - 0 800415C] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 5308] [tid: 7732] [username:] [file: CHsxServerImpl.cpp] [line: 229] [version: 11.1.2.3.000.4045] [appName: HsxServer.exe] [devString:] [paramString:] An unknown error occurred in the HsxServerImpl object.
[2014 09-16 T 13: 47:32 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FE] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 10760] [tid: 10864] [username:] [file: IOCPServer.cpp] [line: 419] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv4] [paramString: listening FM - DME Hyperion service stopped on the port: 9097;] EHR listener process stopped.
[2014 09-16 T 13: 47:32 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FE] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 10760] [tid: 17372] [username:] [file: IOCPServer.cpp] [line: 419] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv6] [paramString: listening FM - DME Hyperion service stopped on the port: 9097;] EHR listener process stopped.
[2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-46305] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: DMEListener.cpp] [line: 797] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: listening to Hyperion FM - DME Service started successfully.;] The DME IP listener financial management service began.
[2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM - 4630B] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: IOCPServer.cpp] [line: 246] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: family of IP: Port IPv4 number: 9097 number of connections: 4;] Initializing the receiver
[2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FD] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 4824] [username:] [file: IOCPServer.cpp] [line: 369] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv4] [paramString: listening service FM - DME Hyperion started on port: 9097;] Listening to EMR process began.
[2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM - 4630B] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 6364] [username:] [file: IOCPServer.cpp] [line: 246] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString:] [paramString: family of IP: Port IPv6 number: 9097 number of connections: 4;] Initializing the receiver
[2014 09-16 T 13: 47:37 - 07:00] [EPMFM] [NOTIFICATION: 16] [HFM-462FD] [HFM] [ecid:] [Org: oracle] [host: HYPERION-4] [pid: 7172] [tid: 3412] [username:] [file: IOCPServer.cpp] [line: 369] [version: 11.1.2.3.000.4045] [appName: DMEListener.exe] [devString: family of earphone: IPv6] [paramString: listening service FM - DME Hyperion started on port: 9097;] Listening to EMR process began.
Your comments would be appreciated?
Thank you
Mady
We have installed in another server (it is environment of distribution), it works fine.
I think that it is question of memory or that it treats the issue.
If I find a solution later, I will update the thread.
Thanks for all the inputs.
Thank you
Mady
-
Ethernet USB adapter does not work after update to sierra mac
Ethernet USB adapter does not work after update to mac sierra.
Please solve this problem as soon as POSSIBLE
Hello guatamshah,
If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.
The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
Reset the management system (SCM) controller on your Mac.https://support.Apple.com/en-us/HT201295
How to reset the NVRAM on your Mac.
https://support.Apple.com/en-us/HT204063If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
OS X: about system information and System Profilerhttps://support.Apple.com/en-us/HT203001
If she does not appear in the information system, see the articles below.
macOS Sierra: If a USB device does not workhttps://support.Apple.com/kb/PH25343
macOS Sierra: check your device's USB connection
https://support.Apple.com/kb/PH25567
However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.
macOS Sierra: Add a network service
https://support.Apple.com/kb/PH25279If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!
Kind regards.
-
IPhoto does not open or update in the UK store
Hello
My Iphoto has decided that it does not open or update.
When I click on update it says "the object you requested is not available in the UK store.
I followed the instructions on a similar problem, but when I go to purchased apps to remove it, it does not appear. When I then go to 'Show', this option is not available for me.
I am currently using OS X El Capitan version 10.11.5, I think it is a recent update and could be a problem cause (but I don't really know)
Please help me
Thank you
I followed the instructions on a similar problem, but when I go to purchased apps to remove it, it does not appear. When I then go to 'Show', this option is not available for me.
You need iPhoto 9.6.1 on El Capitan. But you can only upgrade to iPhoto, if the version you are using a version installed from the AppStore or associated at least your AppleID on the AppStore. If iPhoto came on installer DVD and you have not purchased it from the AppStore or he did not come preinstalled on your Mac with OS X Lion or newer, then you can is no longer up-to-date. Apple has stopped the development of iPhoto, and update is no longer supported. You can only reinstall versions of iPhoto you already own. It is too late now to convert the DVD of iPhoto versions versions AppStore.
You can open your libraries in Photos for Mac iPhoto library, however. It is the successor to Apple iPhoto. See this support document, how your iPhoto library will appear in Photos: How Photos handles content and metadata for iPhoto and Aperture - Apple Support
Also: Notes on the migration of an iPhoto for iPhoto to Photos for Mac library
-
As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0
As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0
This may be caused by the Tab Mix Plus extension
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can try to install the latest Dev version of Tab Mix more if you use this extension.
See the sticky on the forum of Tab Mix Plus:
-
roboformtaskbaricon process does not close after that firefox 9 is closed
Hello
roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.
Thank you, specialist
On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.
Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
ASUS laptop computer: touch screen does not work after update of windows 10
My touch screen does not work after update of windows 10 in Chrome. How can I fix it?
Hello
Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.
Kind regards.
-
Portege M200 recovery process does not work
I want to re format my old M200 of 4 years using the original recovery disks (4).
The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.My C drive is NTFS, and the recovery process does not work.
I'm unable to find any other documents or files on the drives to advise me what to do help.I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks
NTFS.
May I ask what laptop do you have: is it a M200 Satellite or Portege M200?
How have you tried to recover the laptop?
Have you tried to boot from the CD? -
Hello
My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?
Sincerely,
Misty
Tuesday, October 23, 2012 13:38:01 + 0000, Misty Doran wrote:
Hello
My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?
Call brother and ask them to say that a local place that services
their printers. He brings them and get them to fix it.Ken Blake, Microsoft MVP
-
update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update
Hey lasdj,
Thanks for posting in the Microsoft answers site!
If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.
To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.
Therefore, remove the compression of the DATA directory and run together to the top again.
Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.
See the links below for more details:
Windows Update error 6d9e
http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9EInstall SQL Server 2005 and 2008 failures (compressed DATA directory)
http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspxI hope this helps!
Gokul T - Microsoft Support -
my computer does not download an update of Microsoft works 9 KB2092914 (definition 1.89.660.0) since last month. Tried everything. Will not download. Can you help me?
Gray
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47
Please let us know if that helps.
-
I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:
"The version of IE you have installed does not match the update you are trying to install." error no. KB2618444
I'd appreciate any help that I couldn't solve this problem!
Thank you!
E-mail address is removed from the privacy *.
Original title: error KB2618444setup
I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.
You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
I'm going to guess you really want that for IE8.
That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe -
I reinstalled IE8, after which the Windows updates did not work and I got error 0 x 80070424. (XP SP3)
I have re installed SP3, but this does not solve it.
I tried the FIXIT suggested by David Vinod
but this is a no cure.
My latest updates have been in November 2012, nothing since. Any ideas how to fix?
This Microsoft hotfix fix 50687 allowed me to download the updates, but they wouldn't install.
(BITS is re appeared under Services)
Microsoft Update does not store my update history, so he re scan each visit.
These were not installed:
Update for Windows XP (KB946648) security
Update security for Windows XP (KB2510531)
Microsoft Office Compatibility Pack Service Pack 3 (SP3)
Update security for Windows XP (KB2758857)
Update security for Windows XP (KB2770660)
Update for Windows XP (KB2779562)
Update security for Windows XP (KB2753842)
Update for Windows XP and Windows Server 2003 (KB2798897)
Update security for Windows XP (KB2802968)
Update security for Windows XP (KB2780091)
Update security for Windows XP (KB2807986)
Update security for Windows XP (KB2820917)
Update security for Windows XP (KB2813170)
Update security for Windows XP (KB2813345)
A security update cumulative for Internet Explorer 8 for Windows XP (KB2817183)
Update security for Windows XP (KB2808735)
Windows Malicious Software Removal Tool - April 2013 (KB890830)Ko 2757638, which I installed it manually, has not been downloaded or installed.
I downloaded and run Microsoft Fix It Center (21 patches) and this explains that the problem has been corrected. WELL WELL, IT IS FALSE. The problem persists.
But the power down of all installed updates then maybe it's fixed. I'll report later.
Hi, pawn,
Please restore the computer and when you receive the prompt to install the nvidia update, please hide and it woun't install. Here are the steps:To hide updates:(a) click Start, type: Windows Update in run
(b) press on enter on your keyboard
(c) a list of the updates
(d) right-click in the update/s in question and click Hide.Update the adapter driver video directly from the Nvidia site.Let us know the result. If the problem is still not resolved, we will be happy to help you further.
Maybe you are looking for
-
Why Firefox does not allow home page to be changed without my knowledge?
More recently, it has changed for StartNow. StartNow is not listed as an extension or a plugin in the Add-ons Manager.
-
Firefox 5.0, Windows 7
-
I have a T440 which gives a fan error message and then stops immediately. And of course it just went out of warranty last month! Ideas like how to fix?
-
Connecting multiple Renault on the same computer
Hello Im working in a project where I wil need to connect more than 300 digital signs with a USB port. I was looking for options and found two that I liked, but I don't know if LabView trouble reading all the signs of different Renault. My first opti
-
How do I permanently display a Touchbase keyboard in windows 8
A bit of background. I use a DLI10 tablet with windows 8.1 Pro connected to a reader of bar code DS3578. The Tablet is set up to display the keyboard touch base, but the bar code reader is set to TAB after scanning, and when that happens, the keyboar