Processor in Windows 8

Similar Questions

• the upgrade of processor in Windows XP

  Hi, I'm about to upgrade processor. Running Windows XP Home, will it take new drivers and are there any changes to the OS, I need to know.

  The mobo is a GA - 7R GIBABYTE, I hope, last update of the bios. CPU is an AMD ATHLON 2100XP, changing to an AMD ATHLON 2600XP. Gigabyte has confirmed this processor is compatible with the motherboard.
  It's an old system (10 years) but works perfectly well in our modern world.
  Any help/advice would be grateful.
  Regards, Ray.

  No, not at all. Just a couple of no doubt beautiful and very smart guys who share the same name on the forums! :)

• Question about processor and Windows. need to answer accrdingly to discription below. ?

  I use windows xp. on cpu 2.4, 1 gb ram and 256 of the hard drive. and I am aware of two pins in my processor is broken by the heat of combustion. the system still works fine. but the only problem that I face is that it takes 3 x the normal time to copy the data from the drive usb or vice versa...  This is: it is because of the processor broken pins to copy slow. and is there a way to solve via software system say avoid those specifice pins or some how? ?   Hopefully the issue is understandable. answer please...

  Pins broken on a processor and things still work, and your concern is slow copy?

  What is "thermal burning?  You can expand on how these pins really broken?

  There is no software (that I know) to "move" broken material as you describe.  You would be better to spend a little money to find a replacement processor or a replacement processor and motherboard that will accept your current memory, etc. MY HUMBLE OPINION.

  Is * only * the cause of your slow copy - questionable.  Save more explanation of what happened to the pins of the processor - I suspect there is other damage suffered by the system, you don't even know of which could cause slow best USB.  Something with the motherboard, possibly.  Specifically the same USB ports.

  I mean - you could back up everything, perform a clean installation of the operating system and see if it works better after loading the latest drivers form the manufacturers of hardware components in your machine costs and clean...  Otherwise - shot in the dark so that blindfolded and ignoring obvious cries of "stop, don't shoot."  * smile *.

  Side also - comment - if there is something wrong * everything * and you declare it here, the system * not * "are still working fine.  * smile *.

  --
  Martin Stanley
  --

• System has two processors, but windows detects one.

  Hello

  I have a HP Pavilion p6-2100.  The windows Device Manager is displayed two processor but when when I type systeminfo.exe to command prompt its only showing a.  Something misconfigured?

  C:\Windows\System32>SystemInfo.exe

  Host name:
  Name of the operating system: Microsoft Windows 8.1 Pro with Media Center
  OS version: 6.3.9600 n/a build 9600
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner:
  Registered organization:
  Product ID: 00261-70000-00000-AA439
  Original installation date: 10/09/2014, 19:18:09
  Starting system: 24/09/2014, 15:47:53
  Manufacturer: Hewlett-Packard
  System model: p6-2100
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: AMD64 family 18 model 1 Stepping 0 AuthenticAMD
  ~ 2800 Mhz
  BIOS version: FRIEND 7.15, 16/12/2011
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume2
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-05:00) Eastern (U.S. & Canada)
  Total physical memory: 7 155 MB
  Available physical memory: 5 307 MB
  Virtual memory: Max size: 14 323 MB
  Virtual memory: available: 12 356 MB
  Virtual memory: in use: 1 967 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: workgroup
  Logon server: \\MicrosoftAccount
  Corrections: 65 fixes installed.
  Network adapters: 3 interconnect installed.
  [01]: Realtek PCIe GBE Family Controller
  Login name: Ethernet
  DHCP enabled: Yes
  DHCP server: 192.XXX. X.X

  IP addresses
  [01]: 192.XXX. X.X
  [02]: fe88::2012:858 d: 9b3e:6bd9
  [02]: 802.11n wireless LAN Card
  Name of the connection: Wi - Fi
  Status: Media disconnected
  [03]: V9 adapter FAUCET-Windows
  Name of the connection: connection to the Local network
  Status: Media disconnected
  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
  Virtualization enabled in Firmware: No.
  Second floor address translation: Yes
  Data Execution Prevention available: Yes

  C:\Windows\System32 >

  

  Hello

  No, it has only ONE such processor stated on his page

  HP Pavilion p6-2100 Desktop product specifications

  A single processor but TWO cores (or dual-core)

  Kind regards.

• Processor host Windows stopped working popup

  Whenever I use my computer as a message pops up saying windows host processor stopped working. How can I fix it? It is said online and are looking for a solution but my internet won't work either.

  Hi LOU 0507,.

  Remember to make changes to the computer before this problem?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 3: download and install the update that is available in the article below and then check if it makes a difference

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

• 64-bit Intel processors and Windows 2008, Datacenter Edition - Download naming confusion. That what I want?

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  Hé BSAFH

  Here is the vista forums

  Try the help below links

  http://www.Microsoft.com/windowsserver2008/en/us/2008-DC.aspx

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Processors for Windows 8.1 upgrade run XPS400 DXP051.

  Windows 8 does not level to win 8.1 because Intel Pentium D CPU 2 .80GHz does not support the PrefetchW...  Can someone suggest a processor that will work on a card mother Dell 0F030?  What other inof is necessary to answer my question?

  I assume you have Windows 8.0 64-bit and try to install Windows 8.1 64-bit which has high system requirements. Its not known why Microsoft did this for a service pack.

  In this case, you must install Windows 8.1 32 bit that does not have high demands. Theres no advantage to 64-bit on this system as there probably 4 GB of RAM or less.

  The best way to do it is to install Windows 7 32 bit without a product key using a .iso from Digital River:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/Windows-7-SP1-ISO-download/

  Then follows the solution here for download file .iso detail image Windows 8.1 clean install with:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-ISO/

• High utilization of the processor in Windows 7

  I use HP Pavilion g6-2101tu laptop computer with processor Intel COre i3 - 3110M CPU @2. 40 GHz. Whenever I run any program like VLC Media Player or Google Chrome, the CPU reaches 100% usage. I can't find exactly which process is using the CPU at higher rate. Please provide me the solution as soon as POSSIBLE.

  Thank you

  Hi Vishal, zig - zag is right with the WPT toolkit, however if you are not experienced with the resolution of the problems, you might want to first try a few simple tools:

  1. use the built in Windows tool "Resource monitor" to check the process/applications that use resources on your system - it shows more detail than the single task manager.

  2. Sysinternals provides a powerful set of tools, the first to try is "Process Explorer": https://technet.microsoft.com/en-us/sysinternals/bb896653

• After the new motherboard and processor installation Windows requires key, key to the sticker will not validate.

  I installed a new motherboard and processor to my PC and now it's me demanding in the news two days to activate windows. I type the product key that is located on the sticker and it refuses to validate. Assistance is needed.

  The key on the sticker code is assigned to the brand of the computer to which it is applied. Regardless of the brand, changed the m/b and the CPU (unless provided by the original manufacturer is a NEW computer.)

  If the advice of George do not work, you will need to purchase Windows 7 new...

• Increase of processors in Windows Server 2008 R2 VM

  Hello

  I currently have a Windows Server 2008 R2 VM (Citrix Xenapp server desktop) which currently has 2 assigned CPUs, but I would like to pass this to 4. Y at - it any advantage or disadvantage of assignment 4 processors or increasing to 2 CPU cores? Someone at - it a preference?

  The virtual machine is a host that is allowed with a permit from 2012 for 2 Sockets data center. I guess this does not limit the virtual machines to have only 2 CPUs assigned to them and this effect forcing me down the core option? Y at - it traps other any license with giving the VM 4 processor rather than by increasing the carrots?

  Thanks for help.

  Although I'm not completely clear on the NUMA nodes. I guess as I have a 6 core (x 2) with hyperthreading processor that if I need the vCPUs per VM is less than or equal to 6 then wide and flat are not really necessary, but it's a security rule to apply.

  As long as

  (a) your biggest VM by vCPU County fits in a single NUMA (number of physical heart) node

  OR

  (b) you do not exceed 8 (read: at least 9) vCPUs for a single virtual machine

  Then there is no reason to worry about the planning of NUMA (v).

  So the license that applies to the host by CPU sockets is relevant for the host and does not affect the amount of vCPUs I can apply to the virtual machines, it is only affected by what is supported by this operating system.

  Yes, in the case of Windows, it's a hard limit by installed server edition. In addition, the operating system has no way of knowing what license assign you logically to physical processors in the host.

• 4 processors on Windows 7 VM

  Hello

  I would put 4 processors on a virtual Windows 7 computer, but the VM is only seen 2 CPUs.  My understanding is that Windows 7 can see an unlimited number of hearts, but he can't see that 2 physical processors.

  For this reason, I believe that the Windows 7 VM to view the virtual processors that physical, not as carrots.  For this reason the virtual machine will never see more than 2 CPUs.

  Can someone confirm this for me?

  Thank you.

  Take a look at this and see if it helps.

  http://www.yellow-bricks.com/2009/06/04/per-processor-licenses-for-your-application/

• Problem to see my 2 processor on Windows Server 2008 x 64 with VMWare Server 2

  Hello

  My server is an HP Proliant G6 G380 with 2 processors Intel Xeon X 5550 2.66 Ghz (Quad Core)

  Operating system is Windows Server 2008 standard x 64 SP2 and I use VMware-server - 2.0.1 - 156745

  On the Bios, I enabled HyperThreading, virtualization technology...

  On "Windows Task Manager - Performance" I see 16 CPU (2 processors * 4 cores * hyperhtreading).

  On the VMWare Server 2 documentation, they said this support for VMWare Server 2:

  Standard x 86 or x 86-64-compatible server with up to 16 processors.

  Hosts with processors of 32-bit IA - 32 and IA-32 with 64-bit extensions processors are

  supported.

  When I run VMWare Infrastructure Web Access, basically on my VMWare Server, I see only 1 CPU X 5550 8 hearts.

  Do you have any idea why?

  Thank you.

  See my response on this thread: http://communities.vmware.com/thread/215869

• High utilization of the processor and Windows without end research update

  I worked with computers for my whole life.  I'm 7 courses away from completing my bachelor's degree in ITM to include coming soon obtaining of Certifications.  This problem, on one of the computers in my own office, cause me endless frustrations as well as the fact that me, unable to find and implement a solution helps me feel completely incompetent.  Me reaching out to everyone here is a terrible blow for I feel on my own knowledge base because it seems as if the fix can be easy, and I feel as if I am missing something obvious.  That being said here is the issue I am running in:

  On my Windows Vista Ultimate 64 bit, I have no intention of upgrading for various reasons, I notice that my CPU usage and the physical memory usage vary from 60% to almost 100% when I run no applications, which is a more recent symptom and severely hampers my system.  After having reduced the problem of the use to only one of the "svchost.exe" process and the "wuauserv" Service within this process labeled as Windows Update, I confirmed that it was this Service initially at least the question of the use of the CPU by arresting him, I went ahead and ran a manual update of Windows only to find out he's looking for new updates constantly.  The ever green status bar stops moving, or it never gets past that point.  First of all, I advanced and erased the C:\Windows\SoftwareDistribution folder, after you stop the Services, than to have the same problem.  I have never received any type of error on the part of Windows Update code he has yet to reach a point of not not looking for updates.  I also have the chance to try to remove some updates recently installed in an effort to clear all possible corrupt files so that they can be reinstalled to no effect.  The same problem persists.  I am confident, it is a problem of Windows Update and also confident, it's a registry problem, but I struggle to trust one of the edition of solutions that I met in my quest for answers to the registry.  Also, I noticed that after having messed around with patches previously indicated, that my Documents Word from Microsoft do not open when I double-click on it, however, I am still able to open Word and open an existing document to the program itself.  This is a very new symptom, and I'm not sure if it's related.  It is my hope that a new installation of Windows won't be necessary.

  Please let me know diagnostic programs I might need to run to narrow down the issue.  Thanks in advance for all the help I can get on this.

  Hi Llysanth:

  If your initial "check for updates..." Windows Update crashes during long periods without raising an error, this is a widespread problem currently affecting many SP2 of Vista and Win 7 SP1 users.  On my Vista 32 bit system, I see a constant consumption of ~ 50% of my CPU by Windows Update (wuauserv) service which runs under the svchost.exe process (i.e., the saturation full of one of my two hearts) during thecheck for updates...'and Sysinternals Process Explorer shows that the Windows Update Agent (c:\windows\system32\wuaueng.dll) consumes all CPU - to see my images in Kayla77 thread processes in the Manager during updates tasks to day in the VistaForums.

  Some users find 'verification of the updates... ' will be held eventually in the end if you let it run for several hours, but there is also a workaround solution posted on the page Web of Dalai to http://wu.krelay.de/en/ that accelerates the Windows Update for the affected users. Of workaround requires users to install the updated Windows kernel mode driver (Win32K.sys) listed on this webpage so one is missing from your system before running Windows Update.  I used Dalai for the latest Patch workaround three Tuesdays (the second Tuesday of each month) and has reduced my search for 'check for updates...' updates available for 6 or 7 hours up to approx. 25 min.

  The step by step instructions Posted June 16, 2016 wire m #l's updates works do not, he has been looking for updates to the hours are based on workaround of Dalai and will guide you through the installation process of packages update stand-alone (.msu files) for your updates Win32K.sys missing.

  As of today page is Web (August 31, 2016) the current list of updates Win32K.sys on Dalai: KB3078601 (rel. 18 August 2015); KB3109094 (rel. 7 December 2015); KB3145739 (rel. 12 April 2016); KB3164033 (rel. June 14, 2016); KB3168965 (rel. July 12, 2016); KB3177725 (rel. 9 August 2016). Just install updates are missing from your system, so if you have been fully patched at the end of July 2016 you need to manually install the latest KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016) before you run Windows Update to install your remaining August 2016 Patch Tuesday updates.

  Dalai has posted General information that explains why the Windows Update Agent is currently suspended during the "checking for updates..." Windows Update.

  EDIT:

  My apologies to Volume Z.  I don't see your post on KB3177725 until I submitted my response.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• processor host Windows stopped working and was closed

  Vista still 'works' but at a snails pace.

  Hi MarkForker,

  1. When you receive the error message?
  2. Did you the latest changes on the computer?
  3. When was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  So again, you get the error message, then view the event viewer to find out the cause of the error and the message comes back with the details.

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Unresolved problems of high processor and Windows Update

  I have the same problems as many other people and it seems that Microsoft does not care their fixation.

  (1) Windows Update - updates runs for always (in days) without ever finding updates and uses 100% of CPU. I have updates installed until released in February 2016, since then, impossible to get more.

  (2) high CPU and memory for iphlpsvc. What is - why do I need?

  Running Windows 7 Home Premium SP1 under VirtualBox on a Mac.

  And no, I won't upgrade to Windows 10 (not that I could get updates even if I did!)

  Feel tempted to turn off Windows updates forever, everything they do is screw up my system.

  Andrea

  Seems good. Your Windows 7 is up to date. Please post again on the Microsoft Community Forums if you need help.

• INTEL PENTIUM D 820 PROCESSOR AND WINDOWS 7 64 BIT

  INTEL PENTIUM D 820 RUNNING WINDOWS 7 64 BIT CPU?

  64-bit is beneficial with 4 GB or more installed RAM, you do not have 4 GBs of RAM installed, its best stick you with 32-bit.