Produce data of a loop with a structure of the event

Similar Questions

• How to control a VI (with a while loop and a structure of the event) from an another VI

  Hello

  I have the main VI which I want to be driven from an another VI. But I can't do that and I don't know what is happening.

  For example: VI main, I have a while loop with a structure of the event, there is a Boolean controller controlling a Boolean LED, which is inside the structure of the event. And the other VI, there is just a Boolean controller and functions of applications to open the main VI.

  How can I control the Boolean LED in VI main, changing the State of the Boolean controller in an another VI?

  Thank you.

  There are different options, but depending on what you want to do. For this example I can't give you a specific solution.

  I do not understand why you do what you do. Why do you call your 'principle VI' dynamically? What is the advantage to do? There are also other ways to call a VI dynamically, based on real cases (for example the method "call and forget", etc...).

  In you principle VI, control you Boolean ("THATCHER") is not the case of corresponding event. This is not usually a good practice, keep it inside.

  Also, why you try to communicate with the caller and callee VI through such a way to twist? There are better ways to do it.

  In one of my projects, I use the user event to launch orders in case of case of appellant VI.

  some Associates more readings for you:

  http://www.notatamelion.com/2015/03/23/how-to-make-dynamic-subvis/

  http://forums.NI.com/T5/LabVIEW/Dr-Damien-s-development-event-structures-III-communicating-with/m-p/...

• Control of the event: how to stop the race while loop within a structure of the event

  Hello

  I have some problems with control of a while loop inside a structure of the event (see annex VI).

  I have 3 buttons (the "Start measurement, stop, exit the program"). When a measure is running, it should be possible to stop the measure by clicking on "Stop the measure", but it does not work.

  Someone at - it an idea?

  Thank you very much and best regards,

  Michael

  Hi Michael,

  create a process parallel to your measurement. You can use the design model "producer/consumer with vents. You'll find it with «File-> new...» ».

  Another possibility would be to remove the "lock frontpanel" sign, in the case of event start measurement.

  Mike

• Synchronization of 2 loops while one with a structure of the event.

  Hi fellow users of LabVIEW

  I try to incorporate a structure of the event in my current exisiting VI to Save certain values of control as shown in this post

  http://forums.NI.com/T5/LabVIEW/using-the-quot-make-current-values-default-quot-as-a-control-on/TD-p...

  It's the VI that I use as model with my exisiting VI.

  http://forums.NI.com/NI/attachments/NI/170/547715/1/defaults%20Demo.LLB

  In case the 'stop, change the value' I use in the main VI and a 'real' constant instead of Boolean control of wire structure. While the loops are not connected. The table that I use in my exisiting VI (another while loop) is indexed and unbundled to be used here.

  The work combined well screw and it gives me the results, my question is, in the long run it will give me issues. Do I still need to synchronize?

  Thanks for all the help.

  There's no problem because loop additional lower with the structure of the event.

  Personally, I worry about the top loop. Why so complicated? Why so much duplicate code? Why all these hidden indicators serve as local variables?

  Why don't simply place you the table in the entire cluster in a shift register and the index and ungroup by name wharever value, that you need to access. No hidden local variables or indicators.

• problems with timing in a time loop in a structure of the event

  Hello

  I'm using labview to control three motors stepper, running the three stages of different translation in different axes (X, Y and Z). Please see the attached VI, focusing on the structure of the event on the RIGHT side.

  In the Z axis, I am trying to run the engine for 5 seconds, after clicking on a button. I have attampted to do by adding a sub of elapsed time VI within a while loop, located in the tab 'Mouse before Z down' the structure of the event. A similar "elapsed time while loop" is also included in tab 'Z reverse the mouse down' the structure of the event.

  Separately these "elapsed time loops" work very well, BUT when I run a Z direction after another, say 'Z Reverse' and then 'Before Z' then they annoyingly interact. The calendar is gone, with the moment where we add, rather than rebooting.

  No idea how I can reset the time elapsed while loops? Or is there another method better do?

  Thank you very much

  Charlie

  charlieryan wrote:

  I take a wire from the 'i' of the while loop at the entrance of the Sub autoreset - VI of tiem will blink?

  No, connect you to the "reset", not "autoreset".

  

• Loops Parallels and Structure of the event

  Hello

  Is attached a valid way to the use of the structure of the event?  I keep hearing that the case of the event should include control of the event.  Can the control be placed elsewhere?  For example, if I have 2 loops, I placed a structure of the event in the 1st loop and control associated with the event in the 2nd loop, is there a potential problem?  It is true that no matter where a Boolean with a value change is read, the Ministry of value in the event structure will be fired?  See attachment.

  This screenshot you posted should work for you fine.

  The main reason that you hear the case of the event should contain the control for the event is so that the control is read and for locking of Boolean values, gets reset when the case of events runs.

  Here since the first parallel loop runs (assuming nothing else in the loop causes the loop to get blocked), the stop button will read and reset.  The value change event will always be raised in the upper structure of event loop.

• Stop the execution of a loop in a structure of the event

  I tried searching the forums to avoid posting a duplicate, but more I couldn't open most of the vi as they were higher.

  I put in a dummy while loop in an event structire I intend to use. Once I have begin to execute the while loop, I am not able to stop using a control for some reason any the fornt panel control.

  I am not able to change the vale of the shutdown command at all. I tried to create a separate event for the STOP, and I still couldn't stop the program when the While loop was running.

  I guess I'm missing something really small. I would appreciate your comments on this.

  Thank you

  Nevil

  Right-click on the structure of the event and choose 'edit events' in the case that gives you bad.

  Make sure that the check box lock the front panel is not checked.

  I suspect that yours is checked, so your front is locked until the end of the event, so you can never stop your loop.

  

• How do I step manually in code that uses a structure of the event, when I want to select a particular event?

  I use an architecture of producer/consumer for an application with a structure of the event in the upper loop. Events are triggered by the user from the control panel using Boolean switches that are "change when you press on" and "release switch. My question is how can I manually step through the code using various events? It doesn't matter what I'm still not in the same event.

  Thank you.

  You can view the code? Is what event still enter? I did have problems step by step in code that uses a structure of the event. You must be patient, but because the application is slowed down a bit and it can take a while to get into the case of the specific event depending on what events you deal. Usually, I place a breakpoint in the case I am interested and run the application as usual. Once I hit the breakpoint is when I turn on highlighting of execution.

• logical AND with the structure of the event

  Hello world

  The structure of the event can manage several events at once to do the same thing: looks like an OR logical operator. But I have not found a way to sequence events to approach a logic and example: you must click on a button to draw, then enter the image would change the mouse cursor. With a structure of the event, I can handle these 2 events separately or together (i.e. change the cursor), but I can't do a sequence of events.

  Is this possible to do with a structure of the event?

  I hope that I am clear (sorry for English btw). And thanks in advance.

  Christophe

  I don't think this is possible directly. You will need to add status information to your event loop that could enforce the order of events and the rules of logic you want. Where transformation you would have to check whether the required event has occurred before this event. If that were the case, perform your treatment. If this isn't the case, ignore the event. Your first event would need set this status information. You can also include some kind of time-out for the second event were to occur within a specific period.

  This type of logic may be better treated with the help of producer/consumer architecture and a state machine in the task of the consumer.

• problem with tab structure control and event

  Hello

  My program has a tab control. In each tab, I have an event structure to control some events.

  I encountered some problems. These are:

  1. in each tab, I set tab as an event control, to altogether from the structure of the event as tab change (for example, the image below). My first problem is that when I change the tabs, in the arch depending on whether my program is entered in the next tab environment, happening at the event: change value to main tab! And gives bad result.

  

  

  2 - I've scheduled two final tabs as below in the image. I had no routine in these two tabs. Simply, I want when I change the tab, it goes to the next case of the tab control. But when I run the program, it goes to something as busy after one or two changes tab and did not work properly.

  

  Could someone help me please?

  Thanks in advance

  Baran

  Rebecca wrote:

  I want to have 4 tabs, each tab having 3 Boolean control.

  If in each tab all Boolean control wins 1, a Subvi should be run.

  I wrote this code with some time within each tab loop this case hase 3 for each Boolean control. The result is true.

  But I think that if I write it with a structure of the event within each tab instead of 3 cases, the cpu load will be lower.

  Is it not true?

  Make a unique Structure of the event.

  Add events for all controls (buttons, Boolean)

  When the event is triggeredcheck for active tab control and decide what void / vi to run

  It will work fine you

• major error with the structure of the event

  IM under LABVIEW 13.0 PRO

  I don't know when this strarted bug happening, but now when I add a business to a structure of the event. Freezes in LabVIEW. I have to close labview with the Task Manager.

  It doesn't matter what code I'm working with, even a new VI, with nothing else than a structure of the event.

  I tried this on my desktop PC, my laptop and my CPU DAQ.

  The error occurs on my desktop and my laptop. But it does not occur on my CPU DAQ.

  Whenever I click on add event usually case, you get a popup to configure and add cases, but with the popup error never comes to the top and labview crashes.

  Theres no code to share the problem ocured when adding events to the event structure. It happened with any structure of the event, in any code, all the time.

  I spoke to an engineer of apllication of labview and suggested to delete the labview.ini file located in the installation of labview directory. I did this and the problem was solved.

  Still not sure what caused this to happen.

• lost data in the Structure of the event

  Sometimes I'll have data that gets lost in a Structure of the event, or same subVIs that are not performed in events that I know are executed. What would cause this? I have attached a screenshot showing an example where I highlighted to run on.

  Edit: now well attached file

  Make sure you have one tunnel on the other.

• Structure of the event with sub-panels

  Hi, I tried to find a simple example with a structure of the event and only two sub-panels.

  I found the 'new Event Handler.vi' and I'm doing something with two sub - vi I did 'Add.vi' and 'Mul.vi '.

  To be able to switch between the two sub-panels used in 'New Event Handler.vi', the programmer used a "time surge" which I can't locate

  anywhere, so I just copied 'new Event Handler.vi '.

  I can't get this to work.

  Take a peek inside the world

  Sincere greetings,

  Lasse

  Hi Lasse,

  Yes, there is. If you open the properties of the subVIs Add.vi and Mul.vi (Ctrl + I), you can change in the tab 'appearance of the window' to that custom... There is an option display front panel, when it is called and the close later while initially closed just sellect them. Then, you will have the effect of 'pop up' :-)

  I slightly changed the example, so that can see them in the form of pop-up windows.

  See you soon

  Angel

• a few seconds "turn on", how can make I make in the structure of the event

  Hi, friends of LabVIEW

  I want to leave user click and hold down a button for a few seconds to turn on a device. Using registry item and history of shift I can make it work. I wonder how to implement it with case and structured event. Which case should I choose? mouse up?

  I have attached the test code as well.

  Thank you.

  

  I'm sure there are a lot of possible solutions, but here's a way to do it with a structure of the event. Mechanical action of the button is "Switch release." Pressing the button disables the output and sets the timeout of the event at certain time structure. The timeout event switches the output to true. Any other event resets the timeout to-1 value. Unfortunately, it seems that the tool gets messed up the image, so the VI is thus established.

  

• How to manage the structure of the event with two loops

  I have a question about the structure of the user event with 2 buttons?

  key 1: START LOGGING DATA

  key 2: STOP LOGGING DATA

  How do I control my

  structure of the event so that it will work? because now that the loop is save data... I can't stop the loop, when I clicked on buttons.

  

  

  

  super_saiyans wrote:

  the problem with moving it is that I don't have control of the DATA RECORD STARTING?

  Of course, you do.  When you get your press conference button, you say your state machine to move to the State of logging.  You must also make sure that you return to visit the State to wait for the event to check out the events of the stop button.