product activation not accepted

Similar Questions

• Product key not accepted when you try to install Windows XP.

  Windows Xp reinstall the product key invalid pop up

  OK, so here starts my road of woes. First of all, I got a problem with a driver updated on a COMPAQ DeskPro ENS P866. It complements removed all the sounds of this PC. I tried every fix on every techie forum goes without result... including uninstalling, resettlement (thanks to automatic and manual methods). Stop and start services, Fix IT, restores... etc etc. You name it I tried it. I knew that these drivers were on the original Windows installation, so I decided to bite the bullet and do a complete Tassel and take all the patches from its state of origin (desperate that Yes). OK so I took screen prints of my information on the product and information system before you start... I started to follow the XP Reinstall instructions by the support site for windows... and everything seemed to be going great until I arrived at the main screen of the product. I put in my 25 char key and got the pop up "the product Id you entered is not valid. The CD I have, was not a copy retail it was a copy of illigit. However, I bought a license real profit to perform this legal copy... then this could explain why its causing me problems? Otherwise why the * it will not accept my key bought. I checked then double I indexed in as it was printed... and I am really frustrated. Ive gone 1 speaker works do not, no noise, no computer/XP... I tried the Chat Support and they confirmed my product key is still valid... and is the version correct etc etc. But thensaid I need to call a number paying to discuss further. I realize XP is under extended warranty... They want to pay my 46 + VAT + extras before they will even speak with me... at all. So what now? Product ID is 7558881-76487-084-22948 Microsoft Windows XP Professional... updated originally to NT/2000. The sticker on the unit refers to the earlier version HELPPPPP!

  Hello

  I suggest you to return the item and check if it helps:

  Support for the Microsoft Product Activation issues

  http://support.Microsoft.com/GP/cu_sc_prodact_master

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  The article also applies to Windows XP operating system.

• Windows 7 final activation not accepted after cell re - install, you want advice

  Hello

  Here is the result of a tool real troubleshooting

  I did the following:

  (1) fix my laptop in a full erase of all partitions

  (2) used a windows Ultimate install DVD I had my desktop

  (3) entered the product key for my laptop on the label

  Desktop or laptop were Windows Ultimate, so it should work

  However I continue to receive the alert saying my product key is not accepted

  Thanks in advance for your help

  Here is the output of the diagnostic tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-*-472 C 9-4KMVP-2BT7T
  The Windows Product Key hash: /egR4EmYML + B/XzParPDaTOTpRM =
  Windows product ID: 00426-OEM-9402033-33965
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {48200135-0C2A-48E2-AC31-865AB3B19FF8} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\dor\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {48200135-0C2A-48E2-AC31-865AB3B19FF8}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-2BT7T00426-OEM-9402033-339658S-1-5-21-4197296818-3568404706-213068744TOSHIBASatellite A500INSYDE1.4020100831000000.000000 + 00071BE3407018400FE08090409GMT Standard Time(GMT+00:00)03TOSINVTOSINV00109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 022a1afb-b893-4190-92c3-8f69a49839fb
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00188-020-333965-02-1033-7600.0000-2172012
  Installation ID: 010564533883706765696024187944318134013651809233343985
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 2BT7T
  License status: initial grace period
  Time remaining: 1740 minute (s) on (1 day (s))
  Remaining Windows rearm count: 4
  Trust time: 09:40:32 09/03/2012

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 8:4:2012 23:40
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NAAAAAEABAABAAEAAAACAAAAAgABAAEAln2mJWzDjmgInwQznmK417S7yiw8VOKF4G52Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC TOSINV TOSINV00
  FACP TOSINV TOSINV00
  HPET TOSINV TOSINV00
  START TOSINV TOSINV00
  MCFG TOSINV TOSINV00
  WDAT INTEL Calpella
  ASF!   TOSINV TOSINV00
  SLIC TOSINV TOSINV00
  SSDT INTEL SataAhci
  ASPT INTEL Calpella
  SSDT INTEL SataAhci

  Use phone Activation

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Vista - product key not accepted when I type in, what should I do now?

  When I try to use Office or Power Point, I asks me to enter the product key. I do it after reading it on the sticker on the base of my laptop, but it's not accept it? Any ideas what I need to do? I'm short of attempts, I can do. Thanks for your help.
  Harry.

  I believe that the key to product based on the portable computer is for Vista. It is not for the office.

  My laptop came with a trial version of Office that I had to buy a license online to continue using it after a few months.

• Microsoft Product key not accepted

  HP Mini 311-1037NR PC

  After the confirmation of my computer has Microsoft 7 [32 bit] installed, after confirming that my computer shows this program updated from today and my computer shows Microsoft t as "enabled" under computer/properties I am always asked for the product key and said while I # incorrect. I also confirmed I have a microsoft product key and is not a serial number, model # etc. It is clearly stated.

  I have a Microsoft Windows 10 on an experimental basis which works OK, but not the 7. Help, please.

  Thank you.

  Microsoft Windows Home Premium is your operating system

  Microsoft office home and student (which includes Word) is an application and was a trial version only.

  There are a few free options. You can try Microsoft Office Live:
  http://www.officelive.com/en-us/

  Or you can download a different style business version of Office applications, it's called OpenOffice (you can google it)

• DIGITS PRODUCT KEY NOT ACCEPTED ON THE INSTALLATION 13 ITEMS

  Bought Adobephotoshop elements 13 first, direct Amazon, not a seller of void, tried the number on the sticker on the album cover, 8 digits? haven't tried all the numbers the rear of the case still no good, say in the instruction book key should begin with 1057, there are no numbers starting with that on mine, please help need this work as soon as possible thank you.

  Well after that almost 2 hours talking to the Adobe customer support and check the reviews of Amazon buyers on the same problem, I finally found the bloody activation numbers, inside the rear of the inner cover, I had to rip and tear the box to find. The link to locate serial numbers does not explain this place!

• Windows 7 not accepted in a retail PC product key

  I have a product key genuine alternative for Windows 7 that I wanted to use to install my friend a new operating system. She has an old Windows XP retail PC. When it came time to activate the operating system by using the product key, the message was: "Product key not accepted" - and the help section, said that this is probably due to the fact that it's a PC detail that is used to have a copy of XP OEM. It is possible to activate a new OS on a computer that was previously bound to an OEM product key? Is it a particular format of the MAC address that accepts only the activation of the OEM operating system?

  The restriction that prevents the operating system that is being replaced is called Secure Boot is available only on the UEFI BIOS and is active with Windows machines 8/10. If the computer had Windows XP on it it would not Secure Boot enabled even if they are available.

  Windows XP/Vista/7 OEM systems has just had the key integrated into the installation image that checked for a tag SLIC in BIOS to check that the license was valid for the particular manufacturer and that it is not activate online or by phone.

  Disk based installations must activate online / by phone so don't check is not the license using the BIOS and ignores the built tag, even if it exists.

  If your license key is detail it should activate automatically or return to the phone Activation however product key not accepted"is not normal under these circumstances. When this message comes up? If during the installation of Windows, the computer is not online, and it is a failure the internal controls of the encrypted in the key product ID, it is not rejected by the activation servers.

  If Windows is installed and you try to activate and then download and run the MGADiag

  https://support.Microsoft.com/en-us/KB/942962

  Click on copy and then paste into an answer here.

• Microsoft does not accept my product key (or more)

  A few years ago, I bought 7 (LEGALLY) and used in the first computer. After the renewal of the computers caused crashes too much / more technical application I am now using my third (and hopefully final) a. After (re) m ' install 7 on this Microsoft already faced a problem: "product-key not accepted". After ignoring this nonsence about a year and a half, I was stupid enough to use the automatic update system. Big brother seemed to have crawled-all about the system and all of a sudden my screen-photo has been blacked out and who knows what they were doing more...

  Try to (re) install the (LEGAL) product key is a failure. I can continue with my computer, but first of all I don't know what Microsoft in the software and then my main is that I bought for the whole of the price of a product and can not even renew a computer. I can understand when to change a computer we have re - enter the key product, but after the scrapping of an old computer, I have to do I don't know what it takes to get all of the appropriate system again.

  looks to me like you have an activation exploit called RemoveWat installed

  Download WATFix - make sure you click the link in the page, not the big shiny buttons! - and use it.

  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK

  
  

  your office is not genuine. (blocked volume license key).

  7 legally bought and complete

  
  

  which edition is this windows?

• Windows Vista Home Premium Activation, will not accept the product key

  I bought a HP Pc several years ago, Windows Vista Home Premium has been and is still on it, now it says I need to activate but will not accept the product key to activate.  It messed me up, I can't get to my desk top.

  1. activation by phone
  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Pay attention to step 2: how to do a phone Activation.
  Note: If the activation service will inform you that it was
  unsuccessful and cannot help with activation, thenSTAY ON THE LINE and your
  call will be transferred to an operator of activation that will help you
  activate your copy of Vista.

  2 here is a response from Keith, Microsoft Support,
  Moderator, on this subject.
  Date: April 29. 2010

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484

  3. how to activate Windows Vista
  http://support.Microsoft.com/kb/940315

• Windows7 will not accept the product key for activation

  Windows7 will not accept the product key for activation after a clean reinstall of the o/S.i. to pass messages to the effect that the product id is not valid for activation, even if it's the OEM product key. Enter the key manually and the telephone audit failed. Any ideas?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• activation of Windows 8 does not accept my product key

  Hello

  I bought a new hard drive and after installing Windows 8, I try to activate with my product key, but it does not accept.
  I tried calling support and when I go through the automated process it asks installation identification numbers that I don't have.
  Please can someone help?
  
  Thank you
  Graham

  Try to talk to a live representative, you will need to do during the week:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• activation of Windows 8 after clean installation does not accept the product key

  Hi all

  I had a system to dual-boot with windows 8 and Ubuntu and tried to delete the Ubuntu but the computer does not start, I tried to fix the mbr and were wrong.

  I then did a clean install of windows 8, but will not accept my product key. Before the clean install, I formatted the hard drive.

  I can do or do I have to buy another windows 8 pro?

  concerning

  Geoff Woods

  Unless you have purchased the version System Builder DVD Win 8, you bought an upgrade.

  You must install the operating system you upgraded and then re-upgrade using your Installer to win 8 and PK.

• How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  The message says:-since first, windows has been activated on this computer, Windows must be reactivated within 3 days.

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  How can I get my windows reactivated as I can't use my old product key more that it is not accepted...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Aalst certainly just use the actual activation.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• New motherboard fitted now XP pro code is not accepted for activation.

  Hi, installed a new motherboard in my computer of girls. Went online to activate, but the key to license not accepted. So I reinstalled XP pro on hard drive, with the new motherboard, in the case where synchronization problem, still not accept product key. Tried to do it by phone. Same result. Finally spoke to a man who told me that the Packard Bell computer was five years old and so the disc that came with it was out of warranty. This maybe true reason not accepted activation key, or someone to give Microsoft could me the truth. Pete has soon

  Microsoft believes that to replace the results of the motherboard in a new computer, so you can not re - install an OEM copy on a new motherboard.

  Of course you did not subscribe to this in the EULA - this is another license which the seller agreed, not you.

  Sorry, you will need to purchase a new copy.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Windows Blog

• Windows XP Setup will not accept my product key

  I am re-installing ona XP laptop, but the installation of Windows XP will not accept my product key. I have an OEM of a Dell PC product key that is no longer functional, and a update product key which is not null else, neither of which works.

  I can't even do the installation to achieve the activation step.

  Link to the entire conversation:
  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/84cef3f8-A205-483e-9edd-de46d3536715
   
  Huh?
  • You have a Dell system, and with this Dell, you have a product key for Windows XP (edition?) - it would be an OEM key be used with an OEM installation CD.
  • You seemed to have bought (where?) a copy of "Retail" / license for Windows XP (edition?) - which would have its own retail product key to be used with a retail installation CD.
  What does not work:
  • using the CD to retail with the product key OEM on Dell machine sticker
  • by using the product key from retail with OEM installation media which might come with the Dell printer
  • have an installation CD OEM with an edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc.) and you try to use the product key OEM for another edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc) (editions must match, House can is complicated in this grouping too.)
  • have an installation CD retail with an edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc.) and you try to use the product key from retail sales to another edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc) (editions must match, House can is complicated in this grouping too.)
  So is that what you are trying to do?  Why did you buy the CD/product key for sale at retail and the editions correspond?
   
  If you're not at the point where you will have to enter the product key - why do you think that the product key is the question? Hah
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html