Profit and loss account

Similar Questions

• What can I do if my lap suddenly profit and loss and say display driver stops working?

  Well, I have windows 7.   Sometimes when I open my browser, my laptop suddenly stopped automatically... and soon end up... in fact it says "DISPLAY DRIVER STOPS WORKING AND SCRAP with SUCCESS".

  There is a big problem on my lap?  pls help me... thanks

  Hi Shara,

  1 did you changes to the computer before the show?
  2. what browser you use to access the Internet?

  3. you get this error message while trying to open the web browser?

  This problem may occur for one or more of the following reasons:

  a. you may need to install the latest updates for your display driver
  (b) Visual effects, or too many programs running in the background may be slowing down your PC
  c. the GPU takes more time than allowed to display graphics on your monitor.

  Note: If you use an older video card, it may be a video driver that is fully compatible with your version of Windows.

  Please refer to the article to resolve the problem:

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2665946?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry in Windows 7, see http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Can we realized gain and loss in option account change a system of receivables

  Hi all
  
  As process on the part of our end of month we are posting a manual log each month to clear this GL account until a balance zero.
  
  Looking at the activity they all seem to be automated AR articles published on foreign exchange transactions.
  
  Is there a way we could get these poster automatically into account 01.2201.4901 instead of 01.9000.9757? This would save we require to do the manual review and avoid situations of lack everything that made us last month.
  
  
  Kind regards
  Rahul

  Hi Raju,

  option 1

  You can modify rendering acquire and account losses from the system on receivables options screen, but it will be effective only for all new transactions that will will be created and not for the existing one...

  Option 2

  If you do not want to change the options of the system, you can override the values of the accounting period by configuring an accounting calculation rule for the Realized Gain and loss Journal line Type. Yet once it entered into force on new transactions only

  Option 3
  You can disable 01.2201.4901 and say that his replacement is 01.9000.9757 in the General Ledger module, so whenever the system would use the replacement account for automatic processing.

  Continue to run the accounting analysis report in the General ledger for the string account 01.9000.9757 every month to cross check if you spent all the manual Journal vouchers to take ZERO stock... I don't know if there is another way to perform a cross-check and minimizing the time that is consumed to present...

  Kind regards
  Ivruksha

• The songs I bought disappeared and my account shows no purchase at all.

  The songs I bought disappeared and my account shows no purchase at all. I've been using iTunes because he went out and bought a lot of songs, why is my recording blank?

  Have you checked your hidden purchases.

• Thunderbird is removal of e-mails from both imap and pop3 accounts, without asking me to do this

  I went to get in my "sent" box to check on an e-mail, but found that they had almost all been deleted. I have imap and pop3 accounts, but this has happened in both. Also happening in the Inbox. I am aware that I asked never to delete e-mails.

  Thank you so much - I have now created a "local folder" (it did not exist previously) and I put in this folder all emails I need to keep. Thank you very much for your advice absolutely great. B June

• Firefox cannot sign out of hotmail, yahoo and gmail account

  When you want to log out after you're done working on your yahoo, hotmail and gmail account, it is not possible to close the session. I had been facing this problem for three days now.

  This problem may be caused by corrupted cookies.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  If clearing cookies doesn't help, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
  
  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite - journal and cookies.txt, if they exist, in the Firefox profile folder where the cookies.sqlite file has been corrupted.

  See also:

  • http://KB.mozillazine.org/cookies

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• How to create and delete accounts

  How can I delete and create accounts?

  Hello

  Your question is off-topic for this forum, you may find the answer here:

  http://support.Microsoft.com/kb/279783

  Good luck

  Donald Anadell

• Windows XP 'Welcome screen and user accounts' missing.

  I have a Windows XP and recently installed NETGEAR for internet access.  My "Welcome screen and user accounts" are missing.  The user accounts are in the title of the user accounts Control Panel, but, "How users connect power, change" Windows and switch Fast has been disabled.  I now have the classic to log in to my account, but now I'm the only user on this computer.  Can you help me solve this problem without uninstalling NETGEAR?  I thank very you much for your time.

  2350sandy

  Your symptoms point to a Graphical Identification and Authentication (Msgina.dll) file that has been replaced by your netgear installation.  The following items describe your condition and suggest alternatives:

  "A discussion about the availability of the fast user switching feature.

  <>http://support.Microsoft.com/kb/294739 >

  "The default Windows logon Interface may not appear after installing third-party program"

  <>http://support.Microsoft.com/kb/302346 >

  HTH,
  JW

• I can't open my MSN e-mail. I had a virus and my account was closed for protection.

  original title: need help to open my msn e-mail!

  I can not open my msn e-mail had a virus and the account was closed for protection (thanks), now after sending all my info to get the code sent to my cell phone so that I can mail openmy hasn't RvC such code, please help I need to check my mail, it is weeks now I can not get help , is my original email * address email is removed from private life *, thanks

  Hello

  The question you have posted is related to MSN and please visit the link below which will provide the support you want.

  Link: https://support.msn.com/default.aspx?mkt=en-us&st=1&wfxredirect=1

  You can also check: how to contact MSN customer service: http://support.microsoft.com/kb/940784

• I'm unable to access the facebook and hotmail accounts.

  Hello. I have a problem of access to both my hotmail and facebook accounts.

  Original title: cannot access my facebook account?, as too my hotmail account?, why

  Hi hot johns.

  Thanks for posting your question in the Microsoft Community Forums.

  You have a problem with access to the Facebook and hotmail account. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what exactly happens when you try to access accounts?

  (2) that you get an error message or error code?

  (3) is this problem limited to access Facebook and Hotmail?

  (4) what is the version of Internet Explorer installed on the computer?

  (5) did you do changes on the computer before the show?

  I would like more information about the issue.

  Method-

  If the question is limited to facebook and hotmail, so I would like to contact forums and respective support groups.

  Check out the links-

  http://www.facebook.com/help/ - Facebook support

  http://answers.microsoft.com/en-us/windowslive - Hotmail forums

  Do get back to us if the problem is not limited to Facebook and Hotmail, and let us know. We will be happy to help you with any question related to windows.

  Thank you.

• Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

  User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,

  Hi johnnyroque

  Thanks for posting on Microsoft Answers.

  Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.

  Please start on the mode of the Windows recovery environment (WINRE).

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

  //////////////////////////////////////////////////////////////////////////////

  To fix a see corrupted profile link below:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please post back and let us know if it helped to solve the problem - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• User (and files) account settings not saved at shutdown

  Hi, I recently got Windows Vista Ultimate 32-bit installed on my PC of house built... the problem I run into is that whenever I stop, when I turn it on again it is still as if it were my first time logging into the user account (I get the Welcome Center window, none of my settings to before I stop were saved)... even though I installed all programs still appear to be installed.

  Also, I'm a little confused about how the "personal file" my account user works (I mean the folder that opens when I click on "Brian" in the start menu, in the upper right).  First of all, my settings, all files in there seem to have erased when I stopped (excluding the makings of the sample).  Second, this personal file does not seem to be the same folder as I get to by going to computer > disc Local (c) > users > Brian 1; even if they are both set in place with the default subfolders (photos, music, video etc.).

  Thus, the settings and files in the personal folder for my user expect to get erased on shutdown... does anyone have a solution for this?

  I appreciate the help!

  Thank you
  Brian

  Your original user is damaged. Make a new user account and copy the data from the old account to the new. After you have all your stuff, you can delete the old damaged account.

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• I see an account administrator and my account to start up

  Hello

  I see an account 'administrator' and 'my account' at startup upward.  The only difference I see is that the "Administrator" account can be deleted.  Please notify.

  Thank you

  Joe

  Technically they can both be deleted.  For example, your account can be deleted too, if you wish.  You just may not be already connected to it.  If you wanted to see Remove button appears, you will need to restart, and then connect to the other account.

• Guest account, that it was automatically added his self as administrator and my account has been defined as a standard user, now I can't delete the guest account and I can't change mine to the administrator

  When I added the account. It was automatically added his self as administrator and my account was created as a standard user, now I can't delete the guest account and I can't change mine to the administrator, what do I do?

  Hello

   

  1. How did you try to disable the guest account?

  2. What do you mean by "when I added the account was automatically added his autonomy as an administrator and my account has been opened as a standard user?

  3. who are you referring?

  4. what happens when you turn off guest account and change the standard user to administrator account?

  5. have you logged as administrator?

  6. you get any error message?

  Please follow the methods.

   

  Method 1:

  Follow the steps in the link.

  Enable or disable the guest account the

  http://Windows.Microsoft.com/is-is/Windows7/turn-the-guest-account-on-or-off

   

  Method 2:

  Activate the account administrator build-in, log on to the administrator account, and then create a new user account with administrator privileges and also try disabling the guest account from the administrator account.

  Check out the links.

  Activate the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910 (also applies to Windows 7)

  Try to create a new administrator account and check.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile