Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

Similar Questions

• Profile of user doesn't have logon for the user administrator

  All of a sudden, I can't sign the administrator.  I've already restored to earlier date.  don't know what to do.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• Cannot install windows live photo gallery, it says I have to sign as an administrator for the download to work

  Original title: Windows Live Photo Gallery problem

  I used to have Windows Live Photo Gallery on this computer and it was working fine.  For some reason, he took off.  I tried to download again and get a message that says I have to sign as an administrator for the download to work.  When I check my user account, it is said that I AM the administrator.

  What should do?  Thank you

  Try to create a new administrator account and see if you can install the program. If you can, your profile is corrupt.

  See the following link: http://support.microsoft.com/kb/811151

• dBV error on ASM DBV-00008: USER name must be specified for the OSM files

  Hello everyone,
  
  I'm trying to run the dbv command, but it displays error. In fact, I have the ASM diskgroup.
  
  [*[Oracle@portalnode01 ~] $ dbv file=+DGRP/orcl/datafile/example.258.806694223*
  
  DBVERIFY: Release 10.2.0.1.0 - Production on sea Mar 20 10:47:05 2013
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  DBV-00008: USER name must be specified for the OSM files
  
  Is where I'm wrong?
  
  Published by: 993776 on March 19, 2013 22:33

  993776 wrote:
  Hello everyone,

  I'm trying to run the dbv command, but it displays error. In fact, I have the ASM diskgroup.

  [*[Oracle@portalnode01 ~] $ dbv file=+DGRP/orcl/datafile/example.258.806694223*

  DBVERIFY: Release 10.2.0.1.0 - Production on sea Mar 20 10:47:05 2013

  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  DBV-00008: USER name must be specified for the OSM files

  Is where I'm wrong?

  try to add the attribute userid to the statement.

  $dbv username = name of user/pwd file=+DGRP/orcl/datafile/example.258.806694223*

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• no user key can be used for the instance of the component integration "Contact."

  I try to use the InsertOrUpdate method on the contacts. All I'm trying to add is a first contact name, first name, telephone number and the owner. Using InsertOrUpdate I get, no user key can be used for the instance of the component integration "Contact."
  
  I can use the Insert method with no problems. What Miss me? Why the InsertOrUpdate method will not insert it?
  
  Thank you.

  Hey... I also had the same problem into account.

  so I tried to give the ExternalSystemId. and it worked... It should work once you set the external id.

  Concerning
  Balaji Tr.

• try to install the update to program and get this message: this program has been blocked. Your administrator set the strategy of blocking this program.

  I got limewire 5.2 installed and tried to install the 5.5 update, but keep the same message: this program has been blocked. Your administrator set the strategy of blocking this program. LimeWireWin.exe unapproved Publisher"I really want this program on my computer, I tried right click on the file to"run as administrator."I also tried to go to control panel, click Administrative Tools (had to change to Classic view to find), but could not find the local security settings.

  'Local security settings' are a reference to group policy, group policy is not included in the 'Home' of the editions of Windows.

  Is there a Parental control on your machine?  'Parental control' is a section of help and Support, accessed via the Start Menu / Help and Support.

  Following on the publishing server warnings type "Publisher" in the same program help and Support.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  "Policies" could be mentioned around this area of the registry.

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies

  To restore default security settings, follow the instructions of Vista in the present.

  Any security software interfere with your installation?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  Have you tried to create another user to test with?

  Sometimes when you right-click on a file to access the properties in a box to unlock to be seen at the bottom of the properties.

• dv5 1002nr difficulty for the black screen and 2 flashing lights

  Hello!

  So I have this laptop (dv5 1002nr) and of course just after the warranty goes out did the laptop. This original computer was one of my friends who took to Best Buy Geek Squad and they told him to fix this laptop it would cost $400 if not more.

  So to make a long story short, she got a new computer and I helped get parameter and everything and then I asked for this laptop (I have set now free) did not work if I could have. He was a useless piece of junk so she agreed.

  After about an hour of resistance tests, transistors, etc., I can verify that all energy through the computer is as it should. I spent maybe 30 minutes on Google without success, and finally I decided to try everything. I started with the new ram without success. I tried all the silly little "trouble shooting tips" HP has for this laptop.  I'm running a little more than 2 hours working on this seemingly useless task when I finally managed to make it work.

  I did about 3 - 5 times now and it works every time.

  First I remove all the ram and then turn it on. (of course it doesn't)

  Turn the power off.

  Then remove the processor and turn it on. (attention)

  Disable.

  Put the processer back in and turn it on. (still not working)

  Disable.

  Put the ram back in and turn on.

  That's what I did and it works every time for me.

  Since I was only 17 and a little short on money I can't go just around portable computers purchase like these with this problem and test this further.

  If anyone has this problem please try this and let me know.

  Oh and HP. thank you very much your 'support' really helped me... at the expense of my portfolio.

  Oh and one thing...

  I did the 'live chat' and they said that my laptop having is not a display might be due to my hard drive or the motherboard.

  1. the hard drive would not effect my monitor does not. Or on a hard disk of the computer AFTER.

  2. except when he said to the motherboard he also lies the processor he was wrong, once again.

  3. it is a faulty laptop and I know other people have had this problem I hope, they read this insead of wasting their time with "HP support".

  GYM - after 2 years dead my DV-5 is back to life.

  Turn on your computer - press and hold what ESC - then the END button repeatedly.

  It worked for me

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.

  Hello.  I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.  Thanks Bob

  Original title: product windows keys 7

  The cheapest option is the OEM System Builder for Windows 7 Home Premium license, but has some license restrictions:

  Amazon.com: Windows 7 Home Premium 64 - Bit System Builder...

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  OR

  A detail that does not have these restrictions:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

• Hardware configuration for the catalog, previews and the RAWs?

  Hi all.

  For the past 2 years I've been running a retina 27 "iMac with 512 GB SSD, because it is the essential motivation.

  My catalog, previews and RAWs have all been on a connected USB3 SSD 1 TB and backed up with time machine to 2 TB drive HARD USB3.

  Now all 3 of my discs are at capacity.

  Historically I've shot with a D800 the D810 so the raws were huge. Now, I'm moving to an X - T2.

  The easy answer is to move the SSD to 2 TB SSD and the TM drive to a 4 GB ext USB disk, which should buy me a few years.

  Maybe another option is to invest in a 4-Bay NAS, stick 4x4gb operates to and use the batch for the backup storage and image TM.

  What do you think guys? even if I'm running a processor i7 and 32 GB of RAM, sake still images second or 2 to appear in my current setup, I really don't want them to appear all slower. It was suggested that I could move all the images more than a year on the NAS and keep the catalog, the previews and the latest images on the 1 TB SSD.

  Curious to hear other ideas and configurations that work well.

  Thanks in adv.

  Craig

  Since you are using a fairly recent Mac she must have a thunderbolt port, otherwise 2 of them and you can also add a USB 3 hub to connect multiple disks to your current configuration. I don't see in adding disks more large and small age of retirement. Just add another 2 disks of the same capacity. You can also get rid of some of the old Time Machine backups to free up space on the drive that you configured for Time Machine.

  As far as I KNOW 99% of multiple NAS boxes drive (Bay) are thus set up a RAID array. Which would limit the overall storage capacity of this box.

  The LR catalog file must also be on a drive connected directly to the computer and not on a network drive.

• Can someone help me because I am student who has recently renewed my membership but when I got to open photoshop it is not have she asked this same software you license I pay for the student kit and I can't redownload photoshop on my mac

  Can someone help me because I am student who has recently renewed my membership but when I got to open photoshop it is not have she asked this same software you license I pay for the student kit and I can't redownload photoshop on my mac because "you run an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms "!"

  When you install the 2015 cloud creative, all or part of the CC apps show 'trial start or buy now' in the creative cloud desktop application, please first try disconnect you creative cloud and folder in: connect and disconnect activate Cloud Creative applications

  If this does not help, see this link:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Is what ODP should not be 64-bit for the 64-bit, and 64 oracle bones

  Underside of thread is ODP.Net
  
  Is what ODP should not be 64-bit for the 64-bit, and 64 oracle bones
  
  Is what ODP should not be 64-bit for the 64-bit, and 64 oracle bones
  
  Hi gurus,
  
  Oracle Data Provider for .NET - http://download.oracle.com/otn/other/ole-oo4o/ODTwithODAC1110720.zip
  
  Is above PACO is compatible with
  OS - windows 2003 (64-bit)
  Oracle - 10.2.0.1 (64 bit of business ed.)
  
  Thank you

  Hi user;

  I believe you can download the tool at the bottom of the link and you can use:
  http://www.Oracle.com/technetwork/database/Windows/downloads/index-090165.html

  Respect of
  HELIOS