Program has no bottom?

Similar Questions

• try to install the update to program and get this message: this program has been blocked. Your administrator set the strategy of blocking this program.

  I got limewire 5.2 installed and tried to install the 5.5 update, but keep the same message: this program has been blocked. Your administrator set the strategy of blocking this program. LimeWireWin.exe unapproved Publisher"I really want this program on my computer, I tried right click on the file to"run as administrator."I also tried to go to control panel, click Administrative Tools (had to change to Classic view to find), but could not find the local security settings.

  'Local security settings' are a reference to group policy, group policy is not included in the 'Home' of the editions of Windows.

  Is there a Parental control on your machine?  'Parental control' is a section of help and Support, accessed via the Start Menu / Help and Support.

  Following on the publishing server warnings type "Publisher" in the same program help and Support.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  "Policies" could be mentioned around this area of the registry.

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies

  To restore default security settings, follow the instructions of Vista in the present.

  Any security software interfere with your installation?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  Have you tried to create another user to test with?

  Sometimes when you right-click on a file to access the properties in a box to unlock to be seen at the bottom of the properties.

• C7280 - cannot scan. Error message indicates another program has control over the device

  I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:

  'Cannot perform the function you have requested because another program has control over ice dev'.

  I have nothing else open and so I can't work on what program has control over the printer.

  C7280 Prtinter. Mac OS x 10.7.

  The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.

  So far, you have the choice of scanning with picture Capture or preview.  I'm sorry.

• uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

  Original title: 2 numbers do not know if they are related

  I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

  Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
  I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

  Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

• I tried to delete a spam message, but whenever I tried the program has stopped working. Any thoughts on how I can remove this message?

  I got a message from someone I know who included an attachment that did not open. When I tried to delete the message several times, the program has stopped working and when I reboot Mail message is still there. Any ideas?

  Hello

  1. What is the exact error message?

  2 have you made any changes to the computer before the show?

  3 What is this problem only occurs with email?

  4. what service provider or of the E-mail client that you are using?

  5. what version of windows are you using?

   
   
  I suggest you to provide more information about the issue.
  http://support.Microsoft.com/kb/555375

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• Windows XP volume icon is missing "volume control program has not been system."

  I can't activate the Volume icon by doing this it says in part: "volume control program has not been installed.    There is no way to install programs to add and I don't have a XP installation CD.  Apparently the following file is missing: Sndvol32.exe

  How can I "fix" this problem without a Windows XP installation CD?

  Thank you!

  Herb Hoke

  E-mail address is removed from the privacy *.

  Hello

  -Did you change on your computer before the show?

  Execute the method 1 of this article and check if it helps.

  http://support.Microsoft.com/kb/319095

  If you do not have access to from the Windows XP CD that contains the installation files, ask the network administrator for help if the computer is at your workplace, or contact Support. To contact Microsoft Support, visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus/

• When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

  Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
  When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
  My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
  I must tell you that my browser is Mozilla Firefox.
  Thank you.

  original title: Notification settings search

  Hello

  I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.

• Trying to fix my sound. Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.

  original title: NO SOUND on MY WINDOWS XP

  I'm unable to install my Volume icon.  I went to the control panel and it tells me to go to add/remove programs.  I did all this AND still cannot get any sound on my Windowns XP.  I've exhausted ALL my options.  I need help please...

  Trying to fix my sound.  Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.  "To install it use Add/Remove programs in the control panel" that IS NOT WORKING

  Hello

  I'm assuming that you're missing sndvol32.exe
  Here is a download link:
  http://www.Firstload.com/?IR=1&fn=sndvol32.exe+download
  It may be useful
  Mike

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what happened?

  I use Adobe Photoshop on a daily basis, from today, that the program has disappeared from my computer. Is it possible to restore the program or to understand what has happened through Windows XP Pro?

  Has it really been uninstalled... or if only the shortcut has disappeared?

  Click Start > search, select "All files and folders", then search for photoshop.exe

  I do not have Photoshop installed, but if it's like other Adobe applications, he located in C:\Program Adobe Photoshop.

• We pick up the forum Windows for an answervolume control program has not been installed

  Volume control program has not been installed, I had this and it just seemed to go away how I recover again

  Hello
  
  1. are you referring to the icon of Volume or any other application that you had installed to control the volume?
  2. have you made changes on the computer recently?
  3. have you installed the Audio drivers?
  Method 1.
  Refer to the procedure described in the link below and check.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2.
  If you are missing Volume icon, perform the steps listed in the article below and check. If the problem persists, reinstall the sound card drivers and check.
  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add
  http://support.Microsoft.com/kb/319095

  I hope this helps.

• "Any new name for the program" has encountered a problem and needs to close. Sorry for the inconvience

  Whenever we try to install something new, that settles it, but when we get the same error message

  "the new name of the program" has encountered a problem and needs to close.  Sorry for the inconvience

  We can't get anything to run now

  Hello

  1 is this problem limited only when installing an application?
  2. what application are you trying to install?

  Method 1.
  I recommend you to reregister the Installer engine.
  Here's how:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister
   
  MSIExec/regserver

  Method 2.
  For other methods, see the article below.
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• program has encountered a problem

  I installed a new program and when I try to start it, a message appears that the program has encountered a problem and needs to close. It has been suggested from the supplier of the program to create a new profile, and then try again. I did and the program works without problem.  Getting back to my user profile, the program will be without operation. The two profile are administrator accounts.
  I use Windows XP home with all updates installed.

  How can I fix the problem so that it will run the program on my original profile as I don't want to start configuring the new profile to work as my old profile? A tedious job.
  Any other ideas?

  Hello Bill, lost

  Thanks for posting on the Microsoft Answers forum.

  Sometimes, a user profile will become corrupt mainly programs that release the handle when the program is closed. Over time, this will cause the profile become corrupt, and the best way to do this is to create a new user account and hover over the old files.

  Copy files to the new user profile

  1 log on as user (account Adminstrative) other than the user whose you copy files to or from the profile.
  2. in Windows Explorer, click on Tools, Folder Options, click the view tab, click show the hidden files and folders, clear the Hide protected operating system files check box and then click OK.
  3. Locate the C:\Documents and Settings\Old_Username folder, where C is the drive on which Windows XP is installed, and where ancien_nom_utilisateur is the name of the profile to copy user data from.
  4. press and hold down the CTRL key while you click each file and subfolder in this folder, except the following files: Ntuser.dat, Ntuser.dat.log, Ntuser.ini
  5. on the Edit menu, click copy.
  6. Locate the C:\Documents and Settings\New_Username folder, where C represents the drive on which Windows XP is installed, and New_Username is the name of the profile that you have created.
  7. on the Edit menu, click Paste.
  8. close the session and log in as a new user.

  A way to keep profiles become corrupt is a utility called user - UPHClean profile cleaning.
  Download it from the location here. This will force the handles to be published and the damper closed when the program is closed.

  I hope this helps.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think